Izvorni znanstveni članak

Physical and numerical modelling of heat treatment the precipitation-hardening complex-phase steel (CP)

A. Kawałek ; Faculty of materials Processing Technology and Applied Physics Częstochowa University of Technology, Częstochowa, Poland
J. Rapalska-Nowakowska ; Faculty of materials Processing Technology and Applied Physics Częstochowa University of Technology, Częstochowa, Poland
H. Dyja ; Faculty of materials Processing Technology and Applied Physics Częstochowa University of Technology, Częstochowa, Poland
B. Koczurkiewicz ; Faculty of materials Processing Technology and Applied Physics Częstochowa University of Technology, Częstochowa, Poland

Sažetak

The article presents the results of physical and numerical modeling of the processes of thermo- plastic treatment of an experimental complex-phase (CP) steel. Numerical tests were carried out using a commercial software program, ThermoCalc. Based on the obtained test results, the austenitization temperature was established. Physical modeling was performed using a DIL 805A/D dilatometer and the Gleeble 3800 system. The characteristic temperatures of the steel and the primary austenite grain size were determined. The test pieces were also subjected to metallographic examinations and Vickers hardness tests. The obtained results served for building an actual CCT diagram for the steel tested.

Ključne riječi

CP steels; microstructure evolution; physical modeling; CCT diagrams

Hrčak ID:

86752

URI

https://hrcak.srce.hr/86752

Datum izdavanja:

1.1.2013.

Posjeta: 1.728 *