Izvorni znanstveni članak

Theoretical and experimental contributions regarding the impact on work environment of welding processes in MIG / MAG protective gas medium

Gh. Amza ; Engineering and Tehnological Systems Management Faculty, Polytehnica University of Bucharest, Romania
M. Groza Dragomir ; Engineering and Tehnological Systems Management Faculty, Polytehnica University of Bucharest, Romania
S. Paise ; Engineering and Tehnological Systems Management Faculty, Polytehnica University of Bucharest, Romania

Sažetak

This paper presents the main factors that cause environmental pollution in the case of the welding procedure in a protective gas environment. In the research the MIG and MAG welding processes were taken into account. The materials used in the experiments were 8TiCr170 stainless steel as the base material and as filler materials 4 types of welding wires were used, characterized by different chemical compositions. To assess the impact on the work environment of such welding processes the pollution coefficient C_p was defined based on the material balance equation as the ratio of the mass of all materials used in the welding process M_t and the effective mass of the welded performed M_u.

Ključne riječi

welding; protective gases; work environment; material balance; pollution coefficient

Hrčak ID:

95683

URI

https://hrcak.srce.hr/95683

Datum izdavanja:

1.7.2013.

Posjeta: 1.376 *