Metalurgija, Vol. 46 No. 3, 2007.
Izvorni znanstveni članak
The Application of Waste Silica Cyclone Powder for the Protective Coating of Steel Billets
M. Torkar
V. Uršič
F. Vode
M Lamut
Sažetak
The role of a protective coating is to diminish the steel surface scaling during the reheating for hot rolling. The protective coating consists of several components, and the effect of the coating is based on the formation of the modification of Al2O3, amorphous SiO2 and FeO×Al2O3, which all exhibit low permeability to oxygen at temperature up to 1200 °C. The silica sand powder from the cyclone is a waste product in the separation of silica sand. Tests confirmed that waste cyclone powder could replace the silica flour as one of the ingredients in the protective coating. The results of the efficiency of the protective coating after the advanced application of waste cyclone powder on AISI 1059 and AISI 6150 steels are presented. The application of the coating decreased the oxidation and decarburisation of the steel surface during the reheating for hot rolling.
Ključne riječi
protective coating; diminution of scaling; silica powder; use of cyclone powder
Hrčak ID:
11924
URI
Datum izdavanja:
4.5.2007.
Posjeta: 1.356 *