Izvorni znanstveni članak

https://doi.org/10.17559/TV-20130928115500

Thermovision and spectrophotometric analysis of ink volume and material characteristics influence on colour changes of heat treated printed substrates

Nemanja Kašiković orcid.org/0000-0002-4416-8070 ; University of Novi Sad, Faculty of technical sciences, Trg Dositeja Obradovića 6, 21000 Novi Sad, Serbia
Dragoljub Novaković orcid.org/0000-0002-6455-7233 ; University of Novi Sad, Faculty of technical sciences, Trg Dositeja Obradovića 6, 21000 Novi Sad, Serbia
Neda Milić ; University of Novi Sad, Faculty of technical sciences, Trg Dositeja Obradovića 6, 21000 Novi Sad, Serbia
Gojko Vladić ; University of Novi Sad, Faculty of technical sciences, Trg Dositeja Obradovića 6, 21000 Novi Sad, Serbia
Željko Zeljković orcid.org/0000-0002-6688-107X ; University of Novi Sad, Faculty of technical sciences, Trg Dositeja Obradovića 6, 21000 Novi Sad, Serbia
Mladen Stančić ; University of Banja Luka, Faculty of technology, Vojvode Stepe Stepanovića 73, 78000 Banja Luka, Bosnia and Herzegovina

Sažetak

This paper presents experimental usage of updated control methods such as thermovision and spectrophotometric analysis in graphic industry. These methods were applied to research the influence of ink volume and material characteristics on colour and heat treated printed substrates. Samples used in these experiments were printed by digital ink jet printing technique using Mimaki JV22 printing machine and J-Eco Subly Nano inks. As printing substrates, three different types of materials were used. Materials were different in respect of fabric weight and thread count, while material composition was the same for all three materials. The appropriate test card consisting of fields of CMYK colours was printed, varying the number of ink layers applied. Samples were exposed to heat treatment after printing. The heat applied was measured by thermovision camera. Spectrophotometric measurements were conducted before and after heat treatment. Based on data gathered by spectrophotometric measurements colour difference ΔE76 was calculated. Results showed that increasing number of layers, as well as right choice of substrates, can improve behaviour of printed product during exploitation.

Ključne riječi

digital textile printing; heat treatment; ink layers; material characteristics

Hrčak ID:

135061

URI

https://hrcak.srce.hr/135061

Datum izdavanja:

23.2.2015.

Podaci na drugim jezicima: hrvatski

Posjeta: 2.365 *