Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.17559/TV-20141020152601

Experimental research on the rock fragmentation load of a water jet-assisted cutting head

Hongxiang Jiang ; College of Mechanical and Electrical Engineering, China University of Mining & Technology, Room A217, No. 269 San Huan Nan Road, Xuzhou, 221116, Jiangsu Province, P. R. China
Changlong Du ; College of Mechanical and Electrical Engineering, China University of Mining & Technology, Room A219, No. 269 San Huan Nan Road, Xuzhou, 221116, Jiangsu Province, P. R. China
Kehong Zheng ; Department of Metallurgical Engineering, College of Mines and Earth Sciences, University of Utah, 135 South 1460 East, Salt Lake City, UT 84112-0114, USA
Songyong Liu ; College of Mechanical and Electrical Engineering, China University of Mining & Technology, Room B410, No. 269 San Huan Nan Road, Xuzhou, 221116, Jiangsu Province, P. R. China


Puni tekst: hrvatski pdf 2.918 Kb

str. 1277-1285

preuzimanja: 443

citiraj

Puni tekst: engleski pdf 2.918 Kb

str. 1277-1285

preuzimanja: 732

citiraj


Sažetak

A test bed for rock fragmentation by cutting head was developed to investigate the load of water jet-assisted cutting heads. In this test bed, water jet was pumped into the center of the conical pick. In the case without water jet, the characteristic index of the cutting torque and pulling force increased with the rock compressive strength exponentially. No obvious relationship was observed between the characteristic indexes of the cutting torque and the rock compressive strength for the case with water jet, but the effect of the water jet on the pulling force of the cutting head was relatively stable. The cutting torque and pulling force were decreased by 20 % to 40 % when the rock compressive strength was lower than the water jet pressure. However, the water jet that assisted in rock fragmentation was less effective when the water pressure was lower than the rock compressive strength. The ratio between water jet pressure and rock compressive strength can help recognize the efficiency of water jets for rock fragmentation by cutting head.

Ključne riječi

characteristic indexes; cutting head; cutting torque; pulling force; rock fragmentation; water jet

Hrčak ID:

147298

URI

https://hrcak.srce.hr/147298

Datum izdavanja:

22.10.2015.

Podaci na drugim jezicima: hrvatski

Posjeta: 2.110 *