Skoči na glavni sadržaj

Prethodno priopćenje

The optimization of the production of sinter as the feedstock of the blast furnace process

P. Besta ; Faculty of Metallurgy and Materials Engineering, VŠB – Technical University of Ostrava, Czech Republic
P. Wicher ; Faculty of Metallurgy and Materials Engineering, VŠB – Technical University of Ostrava, Czech Republic


Puni tekst: engleski pdf 96 Kb

str. 131-134

preuzimanja: 628

citiraj


Sažetak

The performance of the sintering process can be increased by means of various procedures. One of the options is increasing the permeability of the sintering charge and improving the gas-dynamic conditions during the combustion. This can be achieved by dosing coarse sinter on the sintering strands. This article analyzes a research conducted in order to experimentally verify the impact of the use of coarse sinter on the performance of the sintering process.

Ključne riječi

blast furnace; iron; ore; sintering; production

Hrčak ID:

168908

URI

https://hrcak.srce.hr/168908

Datum izdavanja:

2.1.2017.

Posjeta: 1.005 *