Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.17559/TV-20161020210442

Modelling of abrasive wear of Ni-based self-fluxing alloy coatings by the application of experimental design

Sara Havrlisan ; J. J. Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Trg I. Brlić-Mažuranić 2, 35000 Slavonski Brod, Republic of Croatia
Katica Simunovic ; J. J. Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Trg I. Brlić-Mažuranić 2, 35000 Slavonski Brod, Republic of Croatia
Djordje Vukelic orcid id orcid.org/0000-0003-2420-6778 ; University of Novi Sad, Faculty of Technical Sciences, Trg Dositeja Obradovića 6, 21000 Novi Sad, Republic of Serbia


Puni tekst: hrvatski pdf 1.704 Kb

str. 1687-1693

preuzimanja: 500

citiraj

Puni tekst: engleski pdf 1.704 Kb

str. 1687-1693

preuzimanja: 499

citiraj


Sažetak

In this paper resistance to abrasive wear is studied of the Ni-based self-fluxing alloy coatings deposited by flame spraying with fusion. The "dry sand/rubber wheel" test in accordance with the ASTM G65 norm, specifically B and C procedures is used. The experimental data are statistically processed by using analysis of variance, to investigate the influence of two input variables (type of coating: NiCrBSi, NiBSi; spraying distance: smaller, greater) and their interaction on the output variable (volume loss). Data for investigation were obtained by the full factorial design with two, previously mentioned, factors at two levels with three replications. The analysis of variance of obtained experimental data after 100 revolutions of wheel has shown that type of coating, spraying distance as well as interaction between these factors are significant and affect abrasive wear. At 2000 revolutions of wheel it has been found that the type of coating is a significant factor while the spraying distance, the same as interaction between these factors, is of no significance to abrasive wear.

Ključne riječi

abrasive wear; analysis of variance; experimental design; flame spraying with fusion; NiBSi; NiCrBSi

Hrčak ID:

169529

URI

https://hrcak.srce.hr/169529

Datum izdavanja:

29.11.2016.

Podaci na drugim jezicima: hrvatski

Posjeta: 1.891 *