Prethodno priopćenje

Application of ceramic coating to improve abrasive wear resistance of die inserts used to press-mould stampings of refractories

A. W. Orłowicz ; Department of Casting and Welding, Rzeszow University of Technology, Rzeszow, Poland
M. Mróz ; Department of Casting and Welding, Rzeszow University of Technology, Rzeszow, Poland
M. Tupaj ; Department of Casting and Welding, Rzeszow University of Technology, Rzeszow, Poland
B. Kupiec ; Department of Casting and Welding, Rzeszow University of Technology, Rzeszow, Poland
L. Kozak ; Zakłady Magnezytowe ”ROPCZYCE” S.A., Ropczyce, Poland
T. Kij ; Zakłady Magnezytowe ”ROPCZYCE” S.A., Ropczyce, Poland

Sažetak

The paper presents results of a study on abrasive wear resistance of die inserts for composite moulds used to pressmould stampings from refractory materials, determined based on susceptibility to scratching with a diamond indenter. For the study, two inserts of high-chromium cast iron were prepared, of which one was provided with a ceramic coating (60 % Al₂O₃ + 40 % TiO₂) with a metallic interlayer (NiAlCrSi). Both layers were deposited by means of the Atmospheric Plasma Spraying (APS) method. The obtained scratch test results indicate that with the use of the same load force (20 N), die inserts with ceramic coating are characterized with less indenter penetration depth which should translate to higher resistance to abrasive wear.

Ključne riječi

ceramic coating; abrasive wear resistance; high chromium cast iron; microstructure; refractories

Hrčak ID:

180999

URI

https://hrcak.srce.hr/180999

Datum izdavanja:

1.7.2017.

Posjeta: 1.224 *