Tehnički vjesnik, Vol. 17 No. 2, 2010.
Prethodno priopćenje
Influence of crosslinking parameters on the quality of rubber product
Ana Pilipović
orcid.org/0000-0003-1330-6458
; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Chair of Polymer Processing, Ivana Lučića 5, HR-10000 Zagreb, Croatia
Ante Bakić
; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Chair of Polymer Processing, Ivana Lučića 5, HR-10000 Zagreb, Croatia
Maja Rujnić-Sokele
orcid.org/0000-0002-0700-9388
; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Chair of Polymer Processing, Ivana Lučića 5, HR-10000 Zagreb, Croatia
Sažetak
The basis in the production of elastomeric materials is rubber which becomes cured during crosslinking process. Curing is a chemical-physical modification in which mostly plastic rubber transfers to rubber-elastic state. The curing process requires a curing agent, most frequently sulphur, and the process is performed at higher temperatures for several hours. The type of the used rubber defines the basic properties of product, for example: stability, ageing and flexibility at lower temperatures, as well as strength and elasticity. The paper presents the study of influence of crosslinking temperature and crosslinking time on some mechanical properties of natural rubber and styrene/butadiene rubber.
Ključne riječi
crosslinking temperature; crosslinking time; mechanical properties; natural rubber; styrene/butadiene rubber
Hrčak ID:
55483
URI
Datum izdavanja:
30.6.2010.
Posjeta: 1.735 *