Skoči na glavni sadržaj

Metalurgija , Vol. 52 No. 3, 2013.

  • Datum izdavanja: 01.07.2013.
  • Objavljen na Hrčku: 24.01.2013.

Sadržaj

Puni tekst

Simulation of the casting process - a powerful tool for enhanced design of the cutting teeth in surface mining (str. 293-296)

R. Slavkovic, Z. Jugovic, D. Kozak, A. Veg, R. Radisa, S. Dragicevic, M. Popovic
Izvorni znanstveni članak


Influence of temperature and chemical composition on phase transformations of selected oxide melts (str. 297-300)

R. Dudek, S. Rosypalová, J. Dobrovská
Izvorni znanstveni članak


Loss of aluminium during the process of Ti-Al-V alloy smelting in a vacuum induction melting (VIM) furnace (str. 301-304)

L. Blacha, G. Siwiec, B. Oleksiak
Izvorni znanstveni članak


Microstructure evolution and thermal stability of rapidly solidified Al-Ni-Co-RE alloy (str. 305-308)

B. Karpe, A. Nagode, B. Kosec, A. Stoić, M. Dolenec, M. Bizjak
Izvorni znanstveni članak


Non-alloyed Ni3Al based alloys – preparation and evaluation of mechanical properties (str. 309-312)

J. Malcharcziková, F. Chmelík, J. Pešička, M. Kursa, M. Pohludka
Izvorni znanstveni članak


Microstructural investigation of the heat-affected zone of simulated welded joint of P91 steel (str. 317-320)

T. Vuherer, M. Dunđer, Lj. Milović, M. Zrilić, I. Samardžić
Izvorni znanstveni članak


Determination of energy dissipation and process instability in various alloys on the basis of plastometric tests (str. 325-328)

T. Kubina, J. Kliber, L. Kunčická, M. Berková, J. Horsinka, J. Bořuta
Izvorni znanstveni članak


Slags from steel production: Properties and their utilization (str. 329-333)

J. Vlcek, V. Tomkova, H. Ovcacikova, F. Ovcacik, M. Topinkova, V. Matejka
Prethodno priopćenje


Wettability in the liquid Cu-Ag alloy – fireproof material – gas phase system (str. 334-336)

G. Siwiec, B. Oleksiak, P. Folęga, T. Matuła
Prethodno priopćenje


Rhodium platings – experimental study (str. 337-340)

R. Rudolf, B. Budić, D. Stamenković, M. Čolić, A. Ivanič, B. Kosec
Prethodno priopćenje


Determination of electroless deposition by chemical nickeling (str. 341-344)

M. Badida, M. Gombár, L. Sobotová, J. Kmec
Prethodno priopćenje


Porous ceramic - metal composites obtained by infiltration methods (str. 345-348)

A. Boczkowska, P. Chabera, A. J. Dolata, M. Dyzia, A. Oziębło
Prethodno priopćenje


Effect of process parameters on natural aging in a 1004 STEEL (str. 349-351)

L. Guerra-Fuentes, A. Juarez-Hernandez, M. A. L. Hernandez-Rodriguez, M. Herrera-Trejo
Prethodno priopćenje


Resistance of weldclads made by flux-cored arc welding technology against erosive wear (str. 352-354)

I. Pernis, J. Kasala, D. Žabecká
Prethodno priopćenje


Characterization of chemical heterogeneity of the welded joint of two steels by modelling of diffusion processes (str. 355-358)

L. Řeháčková, J. Dobrovská, J. Kalousek
Prethodno priopćenje


Hammer forging process of lever drop forging from AZ31 magnesium alloy (str. 359-362)

A. Gontarz, Z. Pater, K. Drozdowski
Prethodno priopćenje


The technology of variable-pitch cone worms in plastic extruding presses (str. 363-367)

T. Nieszporek, P. Boral
Prethodno priopćenje


Electrochemical behavior of guidewires made of X10CrNi 18-8 STEEL (str. 371-374)

W. Walke, J. Przondziono
Prethodno priopćenje


Calcium phosphate formation from sea urchin - (brissus latecarinatus) via modified mechano-chemical (ultrasonic) conversion method (str. 375-378)

R. Samur, L. Ozyegin, D. Agaogullari, F. N. Oktar, S. Agathopoulos, C. Kalkandelen, I. Duman, B. Ben-Nissan
Prethodno priopćenje


Prediction of metal corrosion by neural networks (str. 379-381)

Z. Jančíková, O. Zimný, P. Koštial
Prethodno priopćenje


Load capacity of hardened gear wheels machined with cubic boron nitride (CBN) wedges (str. 383-386)

R. Talar, A. Stoić
Prethodno priopćenje


Examples of law of seismic wave attenuation (str. 387-390)

Z. Kaláb, B. Pandula, M. Stolárik, J. Kondela
Prethodno priopćenje


A methodology for determining and controlling the buffers before floating bottlenecks in heavy machinery production (str. 391-394)

R. Lenort, R. Klepek, P. Wicher, P. Besta
Prethodno priopćenje


The application of recycled aluminum and plastics in environmental protection (str. 395-398)

G. Tepić, T. Pejakov, B. Lalić, V. Vukadinović, S. Milisavljević
Pregledni rad


Welding of rails with new technology of arc welding (str. 399-402)

D. Bajic, G. Vladimirovich Kuzmenko, I. Samardžić
Pregledni rad


Benchmarking research of steel companies in Europe (str. 410-412)

M. Antošová, A. Csikósová, K. Čulková, A. Seňová
Pregledni rad


Characteristic of iron and steel industry in terms of membership in the European Union (str. 413-416)

Z. Skuza, R. Prusak, C. Kolmasiak
Pregledni rad


Restructuring of steelworks in direct research (str. 417-420)

B. Gajdzik
Pregledni rad


Simulation model of metallurgical production management (str. 429-431)

P. Šnapka, M. Mikušová, K. Janovská, A. Samolejová
Stručni rad


Posjeta: 66.670 *