Skoči na glavni sadržaj

Prethodno priopćenje

Residual stresses in castings produced by press die casting technology

D. Novoselović ; Mechanical Engineering Faculty in Slavonski Brod, University of Osijek, Croatia
I. Budić ; Mechanical Engineering Faculty in Slavonski Brod, University of Osijek, Croatia
I. Samardžić ; Mechanical Engineering Faculty in Slavonski Brod, University of Osijek, Croatia


Puni tekst: engleski pdf 350 Kb

str. 119-122

preuzimanja: 1.467

citiraj


Sažetak

The influence of technological parameters on residual stresses in pressure die castings is analysed in this paper. In order for the residual stresses to be as low as possible the optimization of technological parameters is necessary. The centrally composed plan of experiment 24cs is used in the investigation. Technologically influencing parameters are changed according to the mentioned plan of experiment and they are: temperature of pouring, rate of die cavity filling with the melt, post pressure in already filled die and the casting cooling time along with the pouring system.

Ključne riječi

casting technology; pressure die casting: residual stresses; the influential technological parameters

Hrčak ID:

126710

URI

https://hrcak.srce.hr/126710

Datum izdavanja:

1.1.2015.

Posjeta: 2.131 *