hrcak mascot   Srce   HID

Review article

Evaluation of compressive test methods for paper using a mathematical model, based on compressive test for corrugated board

Iva Šarčević ; Faculty of Graphic Arts, Zagreb, Croatia
Dubravko Banić ; Faculty of Graphic Arts, Zagreb, Croatia
Diana Milčić ; Faculty of Graphic Arts, Zagreb, Croatia

Fulltext: english, pdf (197 KB) pages 47-50 downloads: 3.544* cite
APA 6th Edition
Šarčević, I., Banić, D. & Milčić, D. (2016). Evaluation of compressive test methods for paper using a mathematical model, based on compressive test for corrugated board. Acta graphica, 27 (1), 47-50. Retrieved from https://hrcak.srce.hr/158401
MLA 8th Edition
Šarčević, Iva, et al. "Evaluation of compressive test methods for paper using a mathematical model, based on compressive test for corrugated board." Acta graphica, vol. 27, no. 1, 2016, pp. 47-50. https://hrcak.srce.hr/158401. Accessed 29 Mar. 2020.
Chicago 17th Edition
Šarčević, Iva, Dubravko Banić and Diana Milčić. "Evaluation of compressive test methods for paper using a mathematical model, based on compressive test for corrugated board." Acta graphica 27, no. 1 (2016): 47-50. https://hrcak.srce.hr/158401
Harvard
Šarčević, I., Banić, D., and Milčić, D. (2016). 'Evaluation of compressive test methods for paper using a mathematical model, based on compressive test for corrugated board', Acta graphica, 27(1), pp. 47-50. Available at: https://hrcak.srce.hr/158401 (Accessed 29 March 2020)
Vancouver
Šarčević I, Banić D, Milčić D. Evaluation of compressive test methods for paper using a mathematical model, based on compressive test for corrugated board. Acta graphica [Internet]. 2016 [cited 2020 March 29];27(1):47-50. Available from: https://hrcak.srce.hr/158401
IEEE
I. Šarčević, D. Banić and D. Milčić, "Evaluation of compressive test methods for paper using a mathematical model, based on compressive test for corrugated board", Acta graphica, vol.27, no. 1, pp. 47-50, 2016. [Online]. Available: https://hrcak.srce.hr/158401. [Accessed: 29 March 2020]

Abstracts
There are several methods for the measurement compressive strength of linerboard and fluting medium paper. The results of different method can vary up to 30% and more for same material sample and the biggest challenge is to determine compressive strength uninfected by other properties. It still isn’t specified which method is technically more correct. The Short-Span Compressive Test (SCT) method is assumed to be more accurate. However, the Ring Crush Test (RCT) method is still widely use despite that it is established it is affected by buckling load of test specimen. In this study these two different methods were performed to measure the compressive strength of corrugated board’s components. The results were implemented in Maltenfort equation for prediction of board compressive strength. The accuracy of methods was evaluated by comparing predicted compressive strength with measured board edgewise compressive strength (ECT). The result confirmed that SCT method is more successful for predicting compressive strength of corrugated board and therefor, more accurate.

Keywords
compression testing; linerboard; fluting medium; corrugated board; Ring Crush Test; Short-Span Compressive Test; Edge Crush Test

Hrčak ID: 158401

URI
https://hrcak.srce.hr/158401

Visits: 3.682 *