Skoči na glavni sadržaj

Izvorni znanstveni članak

High-shear vs. Fluid-bed Granulation Process of Dolomite: Process Modeling

K. Žižek orcid id orcid.org/0000-0002-5315-3890 ; Faculty of Chemical Engineering and Technology, University of Zagreb, Marulićev trg 20, 10 000 Zagreb, Croatia
M. Hraste ; Faculty of Chemical Engineering and Technology, University of Zagreb, Marulićev trg 20, 10 000 Zagreb, Croatia
Z. Gomzi orcid id orcid.org/0000-0002-1241-6316 ; Faculty of Chemical Engineering and Technology, University of Zagreb, Marulićev trg 20, 10 000 Zagreb, Croatia


Puni tekst: engleski pdf 636 Kb

str. 1-8

preuzimanja: 1.318

citiraj


Sažetak

High-shear and fluid-bed processes were used for granulation of dolomite powder into agrochemical product. In this paper, comparative study of the granulation process focuses on the observation of granule size distribution (GSD). Considerable difference between high-shear and fluid-bed GSDs is analyzed with process kinetics. Simulation of dynamic development of GSD is achieved with application of a 1-D discretized population balance and Equi-Partition of Kinetic Energy (EKE) coalescence model. The used
approach indicates for both processes (high-shear and fluid-bed granulation) the presence of coalescence growth as a dominant mechanism in the dolomite granulation process. Deviations between simulated and real GSDs signify the probable existence of other granulation mechanism(s). A posteriori approach by the integral method was used for coalescence rate constant estimation. The generated kinetic considerations represent a valuable step towards a comprehensive perspective of dolomite granulation and implementing
the acquired knowledge in real-life agrochemical granulation.

Ključne riječi

High-shear granulation; fluid-bed granulation; dolomite; granule size distribution; population balance

Hrčak ID:

66096

URI

https://hrcak.srce.hr/66096

Datum izdavanja:

1.4.2011.

Posjeta: 2.163 *