hrcak mascot   Srce   HID

Original scientific paper

The Effect of Heating and Ultrasound on the Shear Bond Strength of Glass Ionomer Cement

Kristina Gorseta   ORCID icon orcid.org/0000-0001-6397-4126 ; University of Zagreb, School of Dental Medicine, Department of Paediatric and Preventive Dentistry, Zagreb, Croatia
Tomislav Skrinjaric ; University of Zagreb, School of Dental Medicine, Department of Paediatric and Preventive Dentistry, Zagreb, Croatia
Domagoj Glavina ; University of Zagreb, School of Dental Medicine, Department of Paediatric and Preventive Dentistry, Zagreb, Croatia

Fulltext: english, pdf (453 KB) pages 1307-1312 downloads: 556* cite
APA 6th Edition
Gorseta, K., Skrinjaric, T. & Glavina, D. (2012). The Effect of Heating and Ultrasound on the Shear Bond Strength of Glass Ionomer Cement. Collegium antropologicum, 36 (4), 1307-1312. Retrieved from https://hrcak.srce.hr/94902
MLA 8th Edition
Gorseta, Kristina, et al. "The Effect of Heating and Ultrasound on the Shear Bond Strength of Glass Ionomer Cement." Collegium antropologicum, vol. 36, no. 4, 2012, pp. 1307-1312. https://hrcak.srce.hr/94902. Accessed 23 Oct. 2021.
Chicago 17th Edition
Gorseta, Kristina, Tomislav Skrinjaric and Domagoj Glavina. "The Effect of Heating and Ultrasound on the Shear Bond Strength of Glass Ionomer Cement." Collegium antropologicum 36, no. 4 (2012): 1307-1312. https://hrcak.srce.hr/94902
Harvard
Gorseta, K., Skrinjaric, T., and Glavina, D. (2012). 'The Effect of Heating and Ultrasound on the Shear Bond Strength of Glass Ionomer Cement', Collegium antropologicum, 36(4), pp. 1307-1312. Available at: https://hrcak.srce.hr/94902 (Accessed 23 October 2021)
Vancouver
Gorseta K, Skrinjaric T, Glavina D. The Effect of Heating and Ultrasound on the Shear Bond Strength of Glass Ionomer Cement. Collegium antropologicum [Internet]. 2012 [cited 2021 October 23];36(4):1307-1312. Available from: https://hrcak.srce.hr/94902
IEEE
K. Gorseta, T. Skrinjaric and D. Glavina, "The Effect of Heating and Ultrasound on the Shear Bond Strength of Glass Ionomer Cement", Collegium antropologicum, vol.36, no. 4, pp. 1307-1312, 2012. [Online]. Available: https://hrcak.srce.hr/94902. [Accessed: 23 October 2021]

Abstracts
The aim of this study was to compare the influence of externally applied »command set« methods (heat, ultrasound) on shear bond strength to enamel of several glass ionomer cements (GIC). The vestibular surfaces of 180 extracted premolars were wet ground until a flat enamel surface was created, and divided into three groups. Three restorative GICs (Fuji IX GP Fast, Fuji Triage, Ionofil Molar AC) were cured in three ways: standard (SC), ultrasonic excitation (UC) and
by an external heat source (HC). In each group, teeth were conditioned in two ways: 30 with 10% polyacrylic acid and 30 without conditioning. The GIC were used to fill teflon molds (3x4 mm). The samples were loaded in a Universal testing machine (LrxMaterial TestingMachine) at a 1 mm/min crosshead speed. Results showed that heat cured Fuji IX on conditioning enamel had significantly greater shear bond strength (13.3 MPa) than all other tested groups (8.6–10.8 MPa) (p<0.001). The mean shear bond strength in GIC with SC and without enamel conditioning was 3.6–5 MPa and had significantly lower bond strength. Heating of GIC increase bond strength, improves the properties of GIC restoration and can be recommended for use as a »command set« method.

Keywords
glass ionomer; shear bond strength; heating; ultrasound

Hrčak ID: 94902

URI
https://hrcak.srce.hr/94902

Visits: 916 *