<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD JATS (Z39.96) Journal Publishing DTD with MathML3 v1.1 20151215//EN " "JATS-journalpublishing1-mathml3.dtd">
<article xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" dtd-version="1.1" article-type="research-article">
  <front>
    <journal-meta>
      <journal-id journal-id-type="doi">10.31298/sl</journal-id>
      <journal-title-group>
        <journal-title xml:lang="hr">Šumarski list</journal-title>
        <trans-title-group xml:lang="en">
          <trans-title>Šumarski list (Journal of the Forestry)</trans-title>
        </trans-title-group>
        <abbrev-journal-title>ŠL</abbrev-journal-title>
      </journal-title-group>
      <issn pub-type="ppub">0373-1332</issn>
      <issn pub-type="epub">1846-9140</issn>
      <publisher>
        <publisher-name xml:lang="hr">Hrvatsko šumarsko društvo</publisher-name>
        <publisher-name xml:lang="en">Croatian Forestry Society</publisher-name>
        <publisher-loc>
          <addr-line>Zagreb, Trg Mažuranića 11</addr-line>
          <ext-link ext-link-type="uri" xlink:href="http://www.sumari.hr">http://www.sumari.hr</ext-link>
        </publisher-loc>
      </publisher>
    </journal-meta>
    <article-meta>
      <article-id pub-id-type="doi">10.31298/sl.148.11-12.3</article-id>
      <article-categories>
        <subj-group subj-group-type="heading" xml:lang="hr">
          <subject>Izvorni znanstveni članak</subject>
        </subj-group>
        <subj-group subj-group-type="heading" xml:lang="en">
          <subject>Original scientific paper</subject>
        </subj-group>
      </article-categories>
      <title-group>
        <article-title xml:lang="en">Examining the changes in the amounts of PM2.5, PM10 and CO2 in the environment in debarking operations</article-title>
        <trans-title-group>
          <trans-title xml:lang="hr">Ispitivanje promjena u količinama PM2,5, PM10 i CO2 u okolišu tijekom postupka otkoravanja</trans-title>
        </trans-title-group>
      </title-group>
      <contrib-group>
        <contrib contrib-type="author">
          <name>
            <surname>Öztürk</surname>
            <given-names>Tolga</given-names>
          </name>
          <email xlink:href="tozturk@istanbul.edu.tr">tozturk@istanbul.edu.tr</email>
        </contrib>
        <contrib contrib-type="author">
          <name>
            <surname>Bilici</surname>
            <given-names>Ebru</given-names>
          </name>
          <email xlink:href="ebru.bilici@giresun.edu.tr">ebru.bilici@giresun.edu.tr</email>
        </contrib>
        <contrib contrib-type="author">
          <name>
            <surname>İnan</surname>
            <given-names>Muhittin</given-names>
          </name>
          <email xlink:href="inan@istanbul.edu.tr">inan@istanbul.edu.tr</email>
        </contrib>
        <contrib contrib-type="author">
          <name>
            <surname>YER</surname>
            <given-names>Batın Mehmet</given-names>
          </name>
          <email xlink:href="batinyer@istanbul.edu.tr">batinyer@istanbul.edu.tr</email>
        </contrib>
      </contrib-group>
      <pub-date>
        <day>05</day>
        <month>12</month>
        <year>2024</year>
      </pub-date>
      <volume>148</volume>
      <fpage>555</fpage>
      <lpage>564</lpage>
      <permissions>
        <license license-type="open-access" xlink:href="">
          <license-p>CC BY-NC-ND (Attribution, Non Commercial, No Derivs)</license-p>
        </license>
      </permissions>
      <abstract xml:lang="en">
        <p>One of the most time-consuming stages in the production of coniferous trees is debarking the bark of the product. During debarking with a chainsaw apparatus, many air pollutants such as bark residues, dust, sawdust, fuel material, etc. are mixed into the environment. This situation reduces the air quality for the workers. This study aims to investigate the impact of the debarking process on worker health and environmental impacts in coastal pine plantations in Sarıyer region. The air pollution parameters PM2.5, PM10, CO2 and HCHO levels during the debarking process were measured using a Temtop M2000 air quality meter. The results showed that when comparing these values to standard air quality metrics, it's clear that the peak values of PM2.5, PM10, and CO2 (247 μg/m3, 411 μg/m3, and 2549 ppm) result in a "Very Unhealthy" environment. The average values for all three (83.91 μg/m3, 121.69 μg/m3, and 614.19 ppm) are classified as "Unhealthy" for PM2.5, and "Moderate" for PM10 and CO2. The study results emphasize that the log debarking process is associated with bark volume, CO2 release and PM2.5 levels. Therefore, it is vital that workers in harvesting use maximum protective equipment, especially respirators. There is also a need to raise awareness and provide training for forest workers on the use of protective equipment. These findings may contribute to the development of effective policies on the health of workers in wood production and environmental quality.</p>
      </abstract>
      <trans-abstract xml:lang="hr">
        <p>Jedna od najdugotrajnijih faza u proizvodnji crnogoričnog drveća je skidanje kore s proizvoda. Tijekom skidanja kore s uređajem s motornom pilom, mnogi zagađivači zraka kao što su ostaci kore, prašina, piljevina, gorivo itd. se miješaju u okoliš. Ova situacija smanjuje kvalitetu zraka za radnike. Ova studija ima za cilj istražiti utjecaj procesa skidanja kore na zdravlje radnika i utjecaj na okoliš u plantažama obalnog bora u regiji Sarıyer. Parametri onečišćenja zraka PM2,5, PM10, CO2 i HCHO tijekom procesa skidanja kore izmjereni su pomoću mjerača kvalitete zraka Temtop M2000. Rezultati su pokazali da kada se te vrijednosti uspoređuju sa standardnom metrikom kvalitete zraka, jasno je da vršne vrijednosti PM2,5, PM10 i CO2 (247 μg/m3, 411 μg/m3 i 2549 ppm) rezultiraju "Vrlo nezdravim" " okoliš. Prosječne vrijednosti za sve tri (83,91 μg/m3, 121,69 μg/m3 i 614,19 ppm) klasificirane su kao "nezdrave" za PM2.5 i "umjerene" za PM10 i CO2. Rezultati studije naglašavaju da je proces skidanja kore trupaca povezan s volumenom kore, ispuštanjem CO2 i razinama PM2,5. Stoga je bitno da radnici u žetvi koriste maksimalnu zaštitnu opremu, posebice respiratore. Također postoji potreba za podizanjem svijesti i obukom šumskih radnika o korištenju zaštitne opreme. Ovi nalazi mogu doprinijeti razvoju učinkovitih politika o zdravlju radnika u proizvodnji drva i kvaliteti okoliša.</p>
      </trans-abstract>
      <kwd-group xml:lang="en">
        <kwd>Debarking,Air quality,Debarking tool,Timber,Temtop M2000</kwd>
      </kwd-group>
      <kwd-group xml:lang="hr">
        <kwd>otkoravanje,kvaliteta zraka,alat za otkoravanje,drvo,Temtop M2000</kwd>
      </kwd-group>
    </article-meta>
  </front>
  <body>
    <sec>
      <title>INTRODUCTION</title>
    </sec>
    <sec>
      <title>UVOD</title>
      <p>Raw wood material production is one of the most time-consuming forestry activities and consists of different stages with different characteristics. These stages include felling, delimbing, crosscutting, extraction, stacking, loading, transportation, and unloading. In Türkiye, all these stages are carried out with the help of human and machine power. Animal power used in splitting has become almost non-existent in wood production activities in recent years. In wood production activities, tree felling, branch and top removal, and lengthening activities are carried out with the help of chainsaws (Gülci et al. 2017), while debarking in coniferous forests is carried out with debarking shovels, debarking hoes, debarking knives, axes, and debarking apparatus attached to chainsaws. In addition, bark stripping operations are carried out with the help of some chemicals and also with water pressure and friction techniques (Gürtan 1969; Eker et al. 2011; Çağlar 2021).</p>
      <p>The transition to mechanized forestry work also brings some health risks to the workers working in wood production. These factors, which pose a risk to human health and are mostly encountered by workers working in the forest, can be diversified as noise, waste gases, particulate matter, vibration, etc. (Taş and Akay 2022). Debarking processes vary depending on tree species, age, ecological conditions, and debarking techniques (Eker et al. 2011). In the debarking operations carried out with the apparatus attached to the chainsaw, intense dust, organic matter, and gas emerge. This intensity has been observed especially in products with high bark thickness. Operators working in debarking operations are exposed to this dense mixture when they do not use protective equipment. Exposure to wood dust in long-term work can cause asthma, lung cancer, skin and eye irritations, runny nose (Gülci et al. 2018), upper respiratory and lower respiratory tract disorders (Bishop 2021), poisoning, and allergies in the respiratory system (Arslan et al. 2010).</p>
      <p>Particulate matter (PM), a common air pollutant, is a mixture of solid and liquid organic and inorganic matter suspended in the air. Particles vary in origin, chemical composition, and size. Size is defined as aerodynamic diameter and ranges from 0.001 to 100 µm. Particles are generally characterized as coarse (2.5-10 µm), fine (0.1-2.5 µm), and ultrafine (≤0.1 µm) (Gao et al., 2015). Coarse particles are referred to as PM<sub>10</sub>, fine particles as PM<sub>2.5</sub>, and ultrafine particles as PM<sub>1</sub>. Particles referred to as PM<sub>10</sub> can reach the upper respiratory tract in humans, while particles referred to as PM<sub>2.5</sub> can affect human health by reaching the lower respiratory tract (Arslan et al. 2010). There are limit values arranged in tables for air quality, which is very important for human health. When these limit values are exceeded, permanent problems for human health may arise. These limit values are shown in Table 1 (Flores et al., 2020).</p>
      <p>Table 1. Air quality limit values</p>
      <p>Tablica 1. Granične vrijednosti kvalitete zraka</p>
      <table-wrap>
        <table>
          <thead>
            <tr>
              <th>
                <bold>PM<sub>2.5</sub></bold>
              </th>
              <th>
                <bold>PM<sub>10</sub></bold>
              </th>
              <th>
                <bold>CO<sub>2</sub></bold>
              </th>
              <th>
                <p>
                  <bold>Status</bold>
                </p>
              </th>
              <th>
                <bold>HCHO</bold>
              </th>
              <th>
                <bold>TVOC</bold>
              </th>
              <th>
                <p>
                  <bold>Status</bold>
                </p>
              </th>
            </tr>
          </thead>
          <tbody>
            <tr>
              <td>
                <bold>μg/m<sup>3</sup></bold>
              </td>
              <td>
                <bold>μg/m<sup>3</sup></bold>
              </td>
              <td>
                <bold>ppm</bold>
              </td>
              <td></td>
              <td>
                <bold>mg/m<sup>3</sup></bold>
              </td>
              <td>
                <bold>mg/m<sup>3</sup></bold>
              </td>
              <td></td>
            </tr>
            <tr>
              <td>0.0-12.0</td>
              <td>0-54</td>
              <td>0-700</td>
              <td>Good</td>
              <td>0-0.1</td>
              <td>0-0.5</td>
              <td>Safe</td>
            </tr>
            <tr>
              <td>12.1-35.4</td>
              <td>55-154</td>
              <td>701-1000</td>
              <td>Moderate</td>
              <td rowspan="5">˃0.1</td>
              <td rowspan="5">˃0.5</td>
              <td rowspan="5">Unsafe</td>
            </tr>
            <tr>
              <td>35.5-55.4</td>
              <td>155-254</td>
              <td>1001-1500</td>
              <td>Unhealthy for sensitive groups</td>
            </tr>
            <tr>
              <td>55.5-150.4</td>
              <td>255-354</td>
              <td>1501-2500</td>
              <td>Unhealthy</td>
            </tr>
            <tr>
              <td>150.5-250.4</td>
              <td>355-424</td>
              <td>2501-5000</td>
              <td>Very unhealthy</td>
            </tr>
            <tr>
              <td>˃250.4</td>
              <td>˃424</td>
              <td>˃5000</td>
              <td>Hazardous</td>
            </tr>
          </tbody>
        </table>
      </table-wrap>
      <p>PM<sub>10</sub> (≤10 µm) from dust and construction cause respiratory irritation; PM<sub>2.5</sub> (≤2.5 µm) from vehicle exhaust and wildfires penetrate deep into the lungs; PM<sub>1</sub> (≤1 µm) from similar sources as PM<sub>2.5</sub>, infiltrate cells and pose severe health risks (California Air Resources Board, 2024). Different substances such as gas, vapor, smoke, and fog pollute the air of the working environment. When these substances reach high concentrations, they become harmful to human health (Taş and Akay 2022). Carbon dioxide (CO<sub>2</sub>), whose rate in the air is quite low compared to other gases, is currently around 400 ppm in the atmosphere. However, CO<sub>2</sub> levels in the atmosphere tend to increase rapidly due to the greenhouse effect (Müezzinoglu, 2000). It is a non-flammable, colorless, and odorless substance which is a result of from natural inhalation and combustion. CO<sub>2</sub> gas, which can be released into the air as a result of the combustion reaction of all kinds of organic matter, is present in the content of waste gases released into the air by domestic heating, exhaust gases, industrial plants, and power plants. Although CO<sub>2</sub> is non-toxic, it reduces the amount of available oxygen in the environment and causes suffocation due to lack of oxygen. When the CO<sub>2</sub> level in the environment exceeds 3500 ppm, negative health effects are observed on the nervous system, along with breathing difficulties (Menteşe and Çotuker 2021).</p>
      <p>In this study, the amounts of PM<sub>2.5</sub>, PM<sub>10</sub>, and CO<sub>2</sub> in the debarking process of coniferous trees in wood production studies were measured. As a result of these measurements, the change in the amount of PM<sub>2.5</sub>, PM<sub>10</sub>, and CO<sub>2</sub> in the environment during debarking operations was revealed. The studies and recommendations to be carried out according to air quality changes in the working environment during debarking operations were presented.</p>
      <sec id="material-and-method">
        <title>
          <bold>MATERIAL AND METHOD</bold>
        </title>
      </sec>
      <sec id="materijali-i-metode">
        <title>MATERIJALI I METODE</title>
        <p>
          <bold>Study area -</bold>
          <bold>Područje istraživanja</bold>
        </p>
        <p>This study was carried out in compartment number 9 located within the boundaries of Sarıyer Forest Management Directorate of Istanbul Regional Directorate of Forestry in Türkiye. Sarıyer Forest Management Directorate covers a total area of 10,543.8 ha, including 5,214.6 ha of forested area, 374.5 ha of unproductive area, 3,962.9 ha of open area, and 991.8 ha of private forests. Forest volume amounts to 217,291 m³, and the total wealth of the coppice forest volume is 49,055 m³. The total increment of the plan unit's forest is 10,646 m³, and the total increment of the coppice forest is 3,887 m³. The region is located between 41°08'13"-41°15'54" north latitude and 28°56'01"-29°06'59" east longitude (GDF 2023) (Figure 1). The size of compartment number 9, where the study was conducted, is 34.1 ha. The area cut within the compartment is a maritime pine (<italic>Pinus</italic> <italic>maritima</italic> Lam.) plantation.</p>
        <graphic mimetype="image" mime-subtype="jpeg" xlink:href="image1.jpeg"/>
        <p>
          <bold>Figure 1. Study area</bold>
        </p>
        <p>Slika 1. Područje istraživanja</p>
        <p>The study was conducted between June 2023 and July 2023. Two workers were involved in the debarking of the logs. The average slope of the land within the compartment varied between 2-12%. There was a dense ground cover in the cutting compartment. Therefore, the logs were removed from the compartment to the roadside landing with the help of a tractor, and the debarking process was carried out on the roadside. Three (3) m logs and 1.25 m industrial timber were the products produced in the compartment. During the study, the humidity of the air was 65% and the wind speed varied between 0 and 5 km/h. All cut trees were healthy and there were no dead standing trees or rotten trees among the cut trees. All logs on which debarking operations were carried out were produced from healthy trees.</p>
        <p>
          <bold>Technical specifications of Husqvarna 365 chainsaw and Baseh debarking tool</bold>
        </p>
        <p>
          <bold>Tehničke karakteristike motorne pile Husqvarna 365 i alata za otkoravanje Baseh</bold>
        </p>
        <p>In the study, Baseh apparatus was used as for debarking (Figure 2) by being mounted on Husqvarna 365 chainsaw. The technical specifications of the chainsaw and Baseh debarking tool are shown in Tables 2 and 3 (URL-1; URL-2).</p>
        <p>
          <bold>Table 2. Technical specifications of the Husqvarna 365 chainsaw</bold>
        </p>
        <p>Tablica 2. Tehničke karakteristike motorne pile Husqvarna 365</p>
        <table-wrap>
          <table>
            <thead>
              <tr>
                <th>
                  <p>
                    <bold>Technical specifications</bold>
                  </p>
                  <p>
                    <bold>Tehničke karakteristike</bold>
                  </p>
                </th>
                <th>
                  <p>
                    <bold>Unit</bold>
                  </p>
                  <p>
                    <bold>Jedinica</bold>
                  </p>
                </th>
                <th>
                  <p>
                    <bold>Technical specifications</bold>
                  </p>
                  <p>
                    <bold>Tehničke karakteristike</bold>
                  </p>
                </th>
                <th>
                  <p>
                    <bold>Unit</bold>
                  </p>
                  <p>
                    <bold>Jedinica</bold>
                  </p>
                </th>
              </tr>
            </thead>
            <tbody>
              <tr>
                <td>
                  <p>Cylinder volume (cm<sup>3</sup>)</p>
                  <p>Power output (kW)</p>
                  <p>Tank capacity (l)</p>
                  <p>Oil depot (liter)</p>
                  <p>Chain speed (m/h)</p>
                  <p>Max. Rotation speed (rpm)</p>
                </td>
                <td>
                  <p>65.1</p>
                  <p>3.4</p>
                  <p>0.77</p>
                  <p>0.42</p>
                  <p>20.7</p>
                  <p>12 500</p>
                </td>
                <td>
                  <p>Bar length (min) (cm)</p>
                  <p>
                    <bold>Bar length (max) (cm)</bold>
                  </p>
                  <p>
                    <bold>Weight (kg)</bold>
                  </p>
                  <p>
                    <bold>Sound pressure level (dB)</bold>
                  </p>
                  <p>
                    <bold>Sound power level (dB)</bold>
                  </p>
                  <p>
                    <bold>Equivalent vibration level (m/s<sup>2</sup>)</bold>
                  </p>
                </td>
                <td>
                  <p>38</p>
                  <p>70</p>
                  <p>6.4</p>
                  <p>102.5</p>
                  <p>114</p>
                  <p>5.7</p>
                </td>
              </tr>
            </tbody>
          </table>
        </table-wrap>
        <graphic mimetype="image" mime-subtype="jpeg" xlink:href="image2.jpeg"/>
        <p>
          <bold>Figure 2. Debarking apparatus</bold>
        </p>
        <p>Slika 1. Alat za otkoravanje</p>
        <p>
          <bold>Table 3. Technical specifications of the Baseh debarking apparatus</bold>
        </p>
        <p>Tablica 3. Tehničke karakteristike alata za otkoravanje Baseh</p>
        <table-wrap>
          <table>
            <thead>
              <tr>
                <th>
                  <p>
                    <bold>Technical specifications</bold>
                  </p>
                  <p>
                    <bold>Tehničke karakteristike</bold>
                  </p>
                </th>
                <th>
                  <p>
                    <bold>Unit</bold>
                  </p>
                  <p>
                    <bold>Jedinica</bold>
                  </p>
                </th>
                <th>
                  <p>
                    <bold>Technical specifications</bold>
                  </p>
                  <p>
                    <bold>Tehničke karakteristike</bold>
                  </p>
                </th>
                <th>
                  <p>
                    <bold>Unit</bold>
                  </p>
                  <p>
                    <bold>Jedinica</bold>
                  </p>
                </th>
              </tr>
            </thead>
            <tbody>
              <tr>
                <td>
                  <p>Weight (kg)</p>
                </td>
                <td>
                  <p>2.9</p>
                </td>
                <td>
                  <p>Debarking width (mm)</p>
                </td>
                <td>
                  <p>120</p>
                </td>
              </tr>
              <tr>
                <td>Belt protection</td>
                <td> </td>
                <td>Knife width (mm)</td>
                <td>120</td>
              </tr>
              <tr>
                <td>     Short model</td>
                <td>0.585</td>
                <td>Knife number</td>
                <td>4</td>
              </tr>
              <tr>
                <td>     Long model</td>
                <td>0.825</td>
                <td>Maximum cycle (rpm)</td>
                <td>13,000</td>
              </tr>
              <tr>
                <td>Engine power (kW)</td>
                <td>1.6</td>
                <td>Link rod feature</td>
                <td>Steel</td>
              </tr>
            </tbody>
          </table>
        </table-wrap>
        <p>
          <bold>Technical specifications of Temtop M2000 air quality meter</bold>
        </p>
        <p>
          <bold>Tehničke specifikacije mjerača kvalitete zraka Temtop M2000</bold>
        </p>
        <p>Temtop M2000 air quality meter (Figure 3) is a PM<sub>2.5</sub>, PM<sub>10</sub>, formaldehyde, CO<sub>2</sub>, humidity, and temperature meter. General technical specifications of the device are shown in Table 4.</p>
        <graphic mimetype="image" mime-subtype="jpeg" xlink:href="image3.jpeg"/>
        <p>
          <bold>Figure 3.</bold>
          <bold>Temtop M2000 air quality meter</bold>
        </p>
        <p>Slika 3. Mjerač kvalitete zraka Temtop M2000</p>
        <p><bold>Table 4</bold>. Technical specifications of Temtop M2000 air quality meter</p>
        <p>Tablica 4. Tehničke karakteristike mjerača kvalitete zraka Temtop M2000</p>
        <table-wrap>
          <table>
            <thead>
              <tr>
                <th>
                  <p>
                    <bold>Technical specifications</bold>
                  </p>
                  <p>
                    <bold>Tehničke karakteristike</bold>
                  </p>
                </th>
                <th>
                  <p>
                    <bold>Measuring ranges</bold>
                  </p>
                  <p>
                    <bold>Mjerni rasponi</bold>
                  </p>
                </th>
              </tr>
            </thead>
            <tbody>
              <tr>
                <td>
                  <p>M2000 model</p>
                  <p>TFT Color LCD screen</p>
                  <p>Battery voltage: 3.7 VDC</p>
                  <p>Dimension: 73.5 x 220 x 37.5 mm</p>
                  <p>Data transfer: USB</p>
                  <p>Temparature range: 0 – 50 ºC</p>
                  <p>Humidity range: %0-90</p>
                  <p>Atmospheric pressure: 1 atm</p>
                  <p>Output voltage: 5 VDC</p>
                  <p>Output current: 1 A</p>
                  <p>Rechargeable</p>
                </td>
                <td>
                  <p>For PM<sub>2.5</sub>;</p>
                  <list list-type="bullet">
                    <list-item>
                      <p>Measuring range: 0 – 999 μg/m<sup>3</sup></p>
                    </list-item>
                    <list-item>
                      <p>Resolution: 0.1 μg/m<sup>3</sup></p>
                    </list-item>
                  </list>
                  <p>For PM<sub>10</sub>;</p>
                  <list list-type="bullet">
                    <list-item>
                      <p>Measuring range: 0 – 999 μg/m<sup>3</sup></p>
                    </list-item>
                    <list-item>
                      <p>Resolution: 0.1 μg/m<sup>3</sup></p>
                    </list-item>
                  </list>
                  <p>For CO<sub>2</sub>;</p>
                  <list list-type="bullet">
                    <list-item>
                      <p>Measuring range: 0 – 5000 PPM</p>
                    </list-item>
                    <list-item>
                      <p>Resolution: 1 PPM</p>
                    </list-item>
                  </list>
                  <p>For Formaldehyde (HCHO);</p>
                  <list list-type="bullet">
                    <list-item>
                      <p>Measuring range: 0 – 5 mg / m<sup>3</sup></p>
                    </list-item>
                    <list-item>
                      <p>Resolution: 0.001 mg / m<sup>3</sup></p>
                    </list-item>
                  </list>
                </td>
              </tr>
            </tbody>
          </table>
        </table-wrap>
        <p>
          <bold>Methods – Metode</bold>
        </p>
        <p>
          <bold>Data collection - Prikupljanje podataka</bold>
        </p>
        <p>The study was carried out in the Sarıyer Forestry Management Directorate in the section numbered 9. Fifty-eight (58) coast pine logs (3 m length) were cut with a chainsaw and a study was carried out to evaluate the parameters affecting the debarking time. The diameter at mid length (<italic>d<sub>0.5</sub></italic>) of each timber was measured in centimeters (cm) and the length (<italic>l</italic>) was measured in meters (m). Huber's formula (2.1) (Carus 2002) was used to calculate the log volume using the mid diameter and log length. The debarking surface area (m<sup>2</sup>) <italic>S</italic> (2.2) and bark thickness (mm) were used to calculate bark volume (2.3) (Eker and Öztürk 2022).</p>
        <p><inline-formula><alternatives><tex-math><![CDATA[V = \ \frac{\pi}{4}{{*(d}^{2}}_{0.5})*l]]></tex-math><mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:mi>V</mml:mi><mml:mo>=</mml:mo><mml:mfrac><mml:mi>π</mml:mi><mml:mn>4</mml:mn></mml:mfrac><mml:msub><mml:msup><mml:mrow><mml:mo>*</mml:mo><mml:mo stretchy="false" form="prefix">(</mml:mo><mml:mi>d</mml:mi></mml:mrow><mml:mn>2</mml:mn></mml:msup><mml:mn>0.5</mml:mn></mml:msub><mml:mo stretchy="false" form="postfix">)</mml:mo><mml:mo>*</mml:mo><mml:mi>l</mml:mi></mml:mrow></mml:math></alternatives></inline-formula> (2.1)</p>
        <p><inline-formula><alternatives><tex-math><![CDATA[S = c*l]]></tex-math><mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:mi>S</mml:mi><mml:mo>=</mml:mo><mml:mi>c</mml:mi><mml:mo>*</mml:mo><mml:mi>l</mml:mi></mml:mrow></mml:math></alternatives></inline-formula> (2.2)</p>
        <p><inline-formula><alternatives><tex-math><![CDATA[B_{v} = S*Bt]]></tex-math><mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:msub><mml:mi>B</mml:mi><mml:mi>v</mml:mi></mml:msub><mml:mo>=</mml:mo><mml:mi>S</mml:mi><mml:mo>*</mml:mo><mml:mi>B</mml:mi><mml:mi>t</mml:mi></mml:mrow></mml:math></alternatives></inline-formula> (2.3)</p>
        <p>
          <bold>In the above equations, <italic>V</italic> is log volume (m<sup>3</sup>), <italic>d<sub>0.5</sub></italic> (cm) is diameter at mid length of the log,</bold>
          <bold><italic>c is circumference of the bark</italic> (m),</bold>
          <bold><italic>S</italic> is debarking surface area of the log (m<sup>2</sup>), <italic>Bt is</italic> bark thickness (m),</bold>
          <bold><italic>Bv</italic> is bark volume of the log (m<sup>3</sup>) and <italic>l</italic> is log length (m).</bold>
        </p>
        <p>
          <bold>Field work method - Metoda rada na terenu</bold>
        </p>
        <p>The air quality device was placed on the operator during debarking operations. The device was placed in a pocket on the reflective vest and positioned so as not to interfere with the operator's work (Figure 4). The device, which was continuously switched on during the debarking process, continuously measured the air quality at one-minute intervals. The data collected on Temtop M2000 was then transferred to the computer via a transfer cable and evaluated. During refueling and operator rest time, the device was left on the operator and measurements were continued.</p>
        <graphic mimetype="image" mime-subtype="jpeg" xlink:href="image4.jpeg"/>
        <p>Figure 4. Debarking work</p>
        <p>Slika 4. Rad na otkoravanju</p>
        <p>The values found during this study were compared with the air quality limit values in Table 1 in terms of their impact on human health.</p>
        <p>
          <bold>Data analysis - Analiza podataka</bold>
        </p>
        <p>Based on the characteristics of the data, the Kolmogorov-Smirnov test was applied. According to the Kolmogorov-Smirnov test results, Debarking time (<italic>sec</italic>) (<italic>Dt<sub>sec</sub></italic>), Work time (<italic>sec</italic>) (<italic>Wt<sub>sec</sub></italic>), Timber volume (<italic>V</italic>), Bark volume (m<sup>3</sup>) (<italic>Bv</italic>) and the features obtained with Temtop M2000 air quality meter (<italic>PM<sub>2.5</sub></italic>: Particulate matter of 2.5 microns and smaller, <italic>PM<sub>10</sub></italic>: Particulate matter of 10 microns and smaller, <italic>CO<sub>2</sub></italic>: Carbon dioxide, <italic>HCHO</italic>: Formaldehyde) were not normally distributed (p&lt;0.05). The correlation between the properties was determined by considering Spearman’s correlation coefficient used for non-normally distributed data. Multiple regression models were developed using the backward selection method with the model shown in equation 2.4, where <italic>Dt<sub>sec</sub></italic> and <italic>Wt<sub>sec</sub></italic> were created as dependent variables and other attributes as independent variables. In addition, the assumptions of the regression analysis were examined and the autocorrelation problem of the regression model was determined by the Durbin-Watson (DW) value. DW value varies between 0-4, and if it is close to 2, it indicates that there is no autocorrelation problem (Kalaycı 2006).</p>
        <p><inline-formula><alternatives><tex-math><![CDATA[Y\  = \ b_{0} + b_{1}X_{1} + b_{2}X_{2} + \ \cdots\  + b_{n}X_{n} + \ \varepsilon\ ]]></tex-math><mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:mi>Y</mml:mi><mml:mo>=</mml:mo><mml:msub><mml:mi>b</mml:mi><mml:mn>0</mml:mn></mml:msub><mml:mo>+</mml:mo><mml:msub><mml:mi>b</mml:mi><mml:mn>1</mml:mn></mml:msub><mml:msub><mml:mi>X</mml:mi><mml:mn>1</mml:mn></mml:msub><mml:mo>+</mml:mo><mml:msub><mml:mi>b</mml:mi><mml:mn>2</mml:mn></mml:msub><mml:msub><mml:mi>X</mml:mi><mml:mn>2</mml:mn></mml:msub><mml:mo>+</mml:mo><mml:mi>⋯</mml:mi><mml:mo>+</mml:mo><mml:msub><mml:mi>b</mml:mi><mml:mi>n</mml:mi></mml:msub><mml:msub><mml:mi>X</mml:mi><mml:mi>n</mml:mi></mml:msub><mml:mo>+</mml:mo><mml:mi>ε</mml:mi></mml:mrow></mml:math></alternatives></inline-formula> (2.4)</p>
        <p>Where <italic>b<sub>i</sub></italic> represent the model coefficients, <italic>Y</italic> is <italic>Dt<sub>sec</sub></italic> or <italic>Wt<sub>sec</sub>, X<sub>i</sub> (i = 1 to n) are texture values</italic> (<italic>B<sub>v</sub></italic> (<italic>m<sup>3</sup></italic>)<italic>, PM<sub>2.5</sub>, PM<sub>10</sub>, CO<sub>2</sub>, HCHO and ε is the error term.</italic></p>
        <p>Data were separated to develop a model and to test the validity of the developed model. The model was developed with 75% of the data (43 of them). The other group comprising 25% of the data (15 of them) was used to test the validation of fitted models. The validity of multiple regression models where all parameter values were significant (p&lt;0.05) was tested by the Wilcoxon signed rank test. The nonparametric Wilcoxon signed rank test was applied instead of student's t test because <italic>Dt<sub>sec</sub></italic> and <italic>Wt<sub>sec</sub></italic> were not normally distributed. Correlation analysis was obtained using the “metan” package in the R software program (R Core Team Citation 2019). IBM SPSS Statistics 29 software was used for the time prediction model and other statistical analyses. All tests were conducted at the significance level of p&lt;0.05. The prediction success of the regression models was determined using Equation 2.5 Adjusted Coefficient of Determination (<italic>R<sup>2</sup><sub>adj</sub></italic>), Equation 2.6 Mean Absolute Error (<italic>MAE</italic>) and Equation 2.7 Root Mean Square Error (<italic>RMSE</italic>), respectively.</p>
        <p>Adjusted Coefficient of Determination <italic>(R<sup>2</sup><sub>adj</sub></italic>);</p>
        <p><inline-formula><alternatives><tex-math><![CDATA[R_{\text{adj}}^{2} = 1 - \frac{\sum_{i = 1}^{n}\left( Y_{i} - {\widehat{Y}}_{i} \right)^{2}(n - 1)}{\sum_{i = 1}^{n}\left( Y_{i} - {\overline{Y}}_{i} \right)^{2}(n - p)}]]></tex-math><mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:msubsup><mml:mi>R</mml:mi><mml:mtext mathvariant="normal">adj</mml:mtext><mml:mn>2</mml:mn></mml:msubsup><mml:mo>=</mml:mo><mml:mn>1</mml:mn><mml:mo>−</mml:mo><mml:mfrac><mml:mrow><mml:msubsup><mml:mo>∑</mml:mo><mml:mrow><mml:mi>i</mml:mi><mml:mo>=</mml:mo><mml:mn>1</mml:mn></mml:mrow><mml:mi>n</mml:mi></mml:msubsup><mml:msup><mml:mrow><mml:mo stretchy="true" form="prefix">(</mml:mo><mml:msub><mml:mi>Y</mml:mi><mml:mi>i</mml:mi></mml:msub><mml:mo>−</mml:mo><mml:msub><mml:mover><mml:mi>Y</mml:mi><mml:mo accent="true">̂</mml:mo></mml:mover><mml:mi>i</mml:mi></mml:msub><mml:mo stretchy="true" form="postfix">)</mml:mo></mml:mrow><mml:mn>2</mml:mn></mml:msup><mml:mo stretchy="false" form="prefix">(</mml:mo><mml:mi>n</mml:mi><mml:mo>−</mml:mo><mml:mn>1</mml:mn><mml:mo stretchy="false" form="postfix">)</mml:mo></mml:mrow><mml:mrow><mml:msubsup><mml:mo>∑</mml:mo><mml:mrow><mml:mi>i</mml:mi><mml:mo>=</mml:mo><mml:mn>1</mml:mn></mml:mrow><mml:mi>n</mml:mi></mml:msubsup><mml:msup><mml:mrow><mml:mo stretchy="true" form="prefix">(</mml:mo><mml:msub><mml:mi>Y</mml:mi><mml:mi>i</mml:mi></mml:msub><mml:mo>−</mml:mo><mml:msub><mml:mover><mml:mi>Y</mml:mi><mml:mo accent="true">¯</mml:mo></mml:mover><mml:mi>i</mml:mi></mml:msub><mml:mo stretchy="true" form="postfix">)</mml:mo></mml:mrow><mml:mn>2</mml:mn></mml:msup><mml:mo stretchy="false" form="prefix">(</mml:mo><mml:mi>n</mml:mi><mml:mo>−</mml:mo><mml:mi>p</mml:mi><mml:mo stretchy="false" form="postfix">)</mml:mo></mml:mrow></mml:mfrac></mml:mrow></mml:math></alternatives></inline-formula> (2.5)</p>
        <p>Mean Absolute Error <italic>(MAE);</italic></p>
        <p><inline-formula><alternatives><tex-math><![CDATA[MAE = \frac{\sum_{i = 1}^{n}\left| Y_{i} - {\widehat{Y}}_{i} \right|}{n}]]></tex-math><mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:mi>M</mml:mi><mml:mi>A</mml:mi><mml:mi>E</mml:mi><mml:mo>=</mml:mo><mml:mfrac><mml:mrow><mml:msubsup><mml:mo>∑</mml:mo><mml:mrow><mml:mi>i</mml:mi><mml:mo>=</mml:mo><mml:mn>1</mml:mn></mml:mrow><mml:mi>n</mml:mi></mml:msubsup><mml:mrow><mml:mo stretchy="true" form="prefix">|</mml:mo><mml:msub><mml:mi>Y</mml:mi><mml:mi>i</mml:mi></mml:msub><mml:mo>−</mml:mo><mml:msub><mml:mover><mml:mi>Y</mml:mi><mml:mo accent="true">̂</mml:mo></mml:mover><mml:mi>i</mml:mi></mml:msub><mml:mo stretchy="true" form="postfix">|</mml:mo></mml:mrow></mml:mrow><mml:mi>n</mml:mi></mml:mfrac></mml:mrow></mml:math></alternatives></inline-formula> (2.6)</p>
        <p>Root Mean Square Error <italic>(RMSE)</italic>;</p>
        <p><inline-formula><alternatives><tex-math><![CDATA[RMSE = \sqrt{\frac{\sum_{i = 1}^{n}{\ \left( Y_{i} - {\widehat{Y}}_{i} \right)}^{2}}{n}}]]></tex-math><mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:mi>R</mml:mi><mml:mi>M</mml:mi><mml:mi>S</mml:mi><mml:mi>E</mml:mi><mml:mo>=</mml:mo><mml:msqrt><mml:mfrac><mml:mrow><mml:msubsup><mml:mo>∑</mml:mo><mml:mrow><mml:mi>i</mml:mi><mml:mo>=</mml:mo><mml:mn>1</mml:mn></mml:mrow><mml:mi>n</mml:mi></mml:msubsup><mml:msup><mml:mrow><mml:mrow><mml:mo stretchy="true" form="prefix">(</mml:mo><mml:msub><mml:mi>Y</mml:mi><mml:mi>i</mml:mi></mml:msub><mml:mo>−</mml:mo><mml:msub><mml:mover><mml:mi>Y</mml:mi><mml:mo accent="true">̂</mml:mo></mml:mover><mml:mi>i</mml:mi></mml:msub><mml:mo stretchy="true" form="postfix">)</mml:mo></mml:mrow></mml:mrow><mml:mn>2</mml:mn></mml:msup></mml:mrow><mml:mi>n</mml:mi></mml:mfrac></mml:msqrt></mml:mrow></mml:math></alternatives></inline-formula> (2.7)</p>
        <p>In these equations, ;<inline-formula><alternatives><tex-math><![CDATA[\ Y_{i}]]></tex-math><mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:msub><mml:mi>Y</mml:mi><mml:mi>i</mml:mi></mml:msub></mml:mrow></mml:math></alternatives></inline-formula>,<inline-formula><alternatives><tex-math><![CDATA[\ {\widehat{Y}}_{i}]]></tex-math><mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:msub><mml:mover><mml:mi>Y</mml:mi><mml:mo accent="true">̂</mml:mo></mml:mover><mml:mi>i</mml:mi></mml:msub></mml:mrow></mml:math></alternatives></inline-formula>, <inline-formula><alternatives><tex-math><![CDATA[{\overline{Y}}_{i}]]></tex-math><mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:msub><mml:mover><mml:mi>Y</mml:mi><mml:mo accent="true">¯</mml:mo></mml:mover><mml:mi>i</mml:mi></mml:msub></mml:math></alternatives></inline-formula> are the measured, estimated and average values for the time study, <italic>n</italic> is the number of observations, and <italic>p</italic> is the number of parameters of the equation.</p>
      </sec>
      <sec id="results-and-discussion">
        <title>RESULTS AND DISCUSSION</title>
      </sec>
      <sec id="rezultati-i-rasprava">
        <title>REZULTATI I RASPRAVA</title>
        <p>
          <italic>Descriptive statistical information of the measurements values and calculations made with the Temtop M2000 air quality device are given in Table 5.</italic>
        </p>
        <p>Table 5. Descriptive statistics</p>
        <p>Tablica 5. Opisna statistika</p>
        <table-wrap>
          <table>
            <thead>
              <tr>
                <th>
                  <p>
                    <bold>Variables</bold>
                  </p>
                  <p>
                    <bold>Varijable</bold>
                  </p>
                </th>
                <th>
                  <p>
                    <bold>Minimum</bold>
                  </p>
                  <p>
                    <bold>Minimum</bold>
                  </p>
                </th>
                <th>
                  <p>
                    <bold>Maximum</bold>
                  </p>
                  <p>
                    <bold>Maksimum</bold>
                  </p>
                </th>
                <th>
                  <p>
                    <bold>Average</bold>
                  </p>
                  <p>
                    <bold>Prosjek</bold>
                  </p>
                </th>
                <th>
                  <p>
                    <bold>Std. Deviation</bold>
                  </p>
                  <p>
                    <bold>Stan. devijacija</bold>
                  </p>
                </th>
              </tr>
            </thead>
            <tbody>
              <tr>
                <td>
                  <disp-formula>
                    <alternatives>
                      <tex-math><![CDATA[d_{0.5}\ \left( \text{cm} \right)]]></tex-math>
                      <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="block">
                        <mml:mrow>
                          <mml:msub>
                            <mml:mi>d</mml:mi>
                            <mml:mn>0.5</mml:mn>
                          </mml:msub>
                          <mml:mrow>
                            <mml:mo stretchy="true" form="prefix">(</mml:mo>
                            <mml:mtext mathvariant="normal">cm</mml:mtext>
                            <mml:mo stretchy="true" form="postfix">)</mml:mo>
                          </mml:mrow>
                        </mml:mrow>
                      </mml:math>
                    </alternatives>
                  </disp-formula>
                </td>
                <td>21</td>
                <td>46</td>
                <td>28.41</td>
                <td>5.678</td>
              </tr>
              <tr>
                <td>
                  <disp-formula>
                    <alternatives>
                      <tex-math><![CDATA[V\ (m^{3})]]></tex-math>
                      <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="block">
                        <mml:mrow>
                          <mml:mi>V</mml:mi>
                          <mml:mo stretchy="false" form="prefix">(</mml:mo>
                          <mml:msup>
                            <mml:mi>m</mml:mi>
                            <mml:mn>3</mml:mn>
                          </mml:msup>
                          <mml:mo stretchy="false" form="postfix">)</mml:mo>
                        </mml:mrow>
                      </mml:math>
                    </alternatives>
                  </disp-formula>
                </td>
                <td>0.104</td>
                <td>0.49</td>
                <td>0.198</td>
                <td>0.086</td>
              </tr>
              <tr>
                <td><inline-formula><alternatives><tex-math><![CDATA[c]]></tex-math><mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mi>c</mml:mi></mml:math></alternatives></inline-formula> (<italic>m</italic>)</td>
                <td>0.66</td>
                <td>1.45</td>
                <td>0.89</td>
                <td>0.178</td>
              </tr>
              <tr>
                <td>
                  <inline-formula>
                    <alternatives>
                      <tex-math><![CDATA[\text{S\ }{(m}^{2})]]></tex-math>
                      <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline">
                        <mml:mrow>
                          <mml:mrow>
                            <mml:mtext mathvariant="normal">S </mml:mtext>
                          </mml:mrow>
                          <mml:msup>
                            <mml:mrow>
                              <mml:mo stretchy="false" form="prefix">(</mml:mo>
                              <mml:mi>m</mml:mi>
                            </mml:mrow>
                            <mml:mn>2</mml:mn>
                          </mml:msup>
                          <mml:mo stretchy="false" form="postfix">)</mml:mo>
                        </mml:mrow>
                      </mml:math>
                    </alternatives>
                  </inline-formula>
                </td>
                <td>1.98</td>
                <td>4.34</td>
                <td>2.68</td>
                <td>0.535</td>
              </tr>
              <tr>
                <td>
                  <inline-formula>
                    <alternatives>
                      <tex-math><![CDATA[Bv\ (m^{3})]]></tex-math>
                      <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline">
                        <mml:mrow>
                          <mml:mi>B</mml:mi>
                          <mml:mi>v</mml:mi>
                          <mml:mo stretchy="false" form="prefix">(</mml:mo>
                          <mml:msup>
                            <mml:mi>m</mml:mi>
                            <mml:mn>3</mml:mn>
                          </mml:msup>
                          <mml:mo stretchy="false" form="postfix">)</mml:mo>
                        </mml:mrow>
                      </mml:math>
                    </alternatives>
                  </inline-formula>
                </td>
                <td>0.01</td>
                <td>0.13</td>
                <td>0.03</td>
                <td>0.026</td>
              </tr>
              <tr>
                <td>
                  <inline-formula>
                    <alternatives>
                      <tex-math><![CDATA[\text{PM}_{2.5}]]></tex-math>
                      <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline">
                        <mml:msub>
                          <mml:mtext mathvariant="normal">PM</mml:mtext>
                          <mml:mn>2.5</mml:mn>
                        </mml:msub>
                      </mml:math>
                    </alternatives>
                  </inline-formula>
                  <italic>(μg/m<sup>3</sup>)</italic>
                </td>
                <td>26</td>
                <td>247</td>
                <td>83.91</td>
                <td>57.700</td>
              </tr>
              <tr>
                <td>
                  <inline-formula>
                    <alternatives>
                      <tex-math><![CDATA[\text{PM}_{10}]]></tex-math>
                      <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline">
                        <mml:msub>
                          <mml:mtext mathvariant="normal">PM</mml:mtext>
                          <mml:mn>10</mml:mn>
                        </mml:msub>
                      </mml:math>
                    </alternatives>
                  </inline-formula>
                  <italic>(μg/m<sup>3</sup>)</italic>
                </td>
                <td>32</td>
                <td>411</td>
                <td>121.69</td>
                <td>95.198</td>
              </tr>
              <tr>
                <td>
                  <inline-formula>
                    <alternatives>
                      <tex-math><![CDATA[\text{CO}_{2}]]></tex-math>
                      <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline">
                        <mml:msub>
                          <mml:mtext mathvariant="normal">CO</mml:mtext>
                          <mml:mn>2</mml:mn>
                        </mml:msub>
                      </mml:math>
                    </alternatives>
                  </inline-formula>
                  <italic>(ppm)</italic>
                </td>
                <td>309</td>
                <td>2549</td>
                <td>914.190</td>
                <td>463.258</td>
              </tr>
              <tr>
                <td>
                  <inline-formula>
                    <alternatives>
                      <tex-math><![CDATA[\text{HCHO}]]></tex-math>
                      <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline">
                        <mml:mtext mathvariant="normal">HCHO</mml:mtext>
                      </mml:math>
                    </alternatives>
                  </inline-formula>
                  <italic>(mg/m<sup>3</sup>)</italic>
                </td>
                <td>0.001</td>
                <td>0.039</td>
                <td>0.0089</td>
                <td>0.011</td>
              </tr>
              <tr>
                <td>
                  <inline-formula>
                    <alternatives>
                      <tex-math><![CDATA[\text{Dt}_{\sec}]]></tex-math>
                      <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline">
                        <mml:msub>
                          <mml:mtext mathvariant="normal">Dt</mml:mtext>
                          <mml:mo>sec</mml:mo>
                        </mml:msub>
                      </mml:math>
                    </alternatives>
                  </inline-formula>
                  <italic>(sn)</italic>
                </td>
                <td>45</td>
                <td>273</td>
                <td>97.45</td>
                <td>40.138</td>
              </tr>
              <tr>
                <td>
                  <inline-formula>
                    <alternatives>
                      <tex-math><![CDATA[\text{Wt}_{\sec}\ ]]></tex-math>
                      <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline">
                        <mml:mrow>
                          <mml:msub>
                            <mml:mtext mathvariant="normal">Wt</mml:mtext>
                            <mml:mo>sec</mml:mo>
                          </mml:msub>
                        </mml:mrow>
                      </mml:math>
                    </alternatives>
                  </inline-formula>
                  <italic>(sn)</italic>
                </td>
                <td>45</td>
                <td>337</td>
                <td>108.81</td>
                <td>47.585</td>
              </tr>
            </tbody>
          </table>
        </table-wrap>
        <p><italic>d<sub>0.5</sub></italic>: Mid diameter <inline-formula><alternatives><tex-math><![CDATA[\left( \text{cm} \right)]]></tex-math><mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:mo stretchy="true" form="prefix">(</mml:mo><mml:mtext mathvariant="normal">cm</mml:mtext><mml:mo stretchy="true" form="postfix">)</mml:mo></mml:mrow></mml:math></alternatives></inline-formula>, <italic>V:</italic> Timber volume <inline-formula><alternatives><tex-math><![CDATA[(m^{3})]]></tex-math><mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:mo stretchy="false" form="prefix">(</mml:mo><mml:msup><mml:mi>m</mml:mi><mml:mn>3</mml:mn></mml:msup><mml:mo stretchy="false" form="postfix">)</mml:mo></mml:mrow></mml:math></alternatives></inline-formula>, <italic>c:</italic> Circumference (<italic>m</italic>), <italic>S</italic>: Debarking surface area (m<sup>2</sup>), <italic>Bv</italic><sub>:</sub> Bark volume (m<sup>3</sup>), <italic>PM<sub>2.5</sub></italic>: Particulate matter of 2.5 microns and smaller, <italic>PM<sub>10</sub></italic>: Particulate matter of 10 microns and smaller, <italic>CO<sub>2</sub></italic>: Carbon dioxide, <italic>HCHO</italic>: Formaldehyde, <italic>Dt<sub>sec</sub>: Debarking time</italic> (sec<italic>), Wt<sub>sec</sub>: Work time (sec)</italic></p>
        <p>When the international air quality limit values given in Table 4 are compared with the values found as a result of the measurements, it was found that the maximum values of PM<sub>2.5</sub>, PM<sub>10</sub> and CO<sub>2</sub> (247 μg/m<sup>3</sup>, 411 μg/m<sup>3</sup> and 2549 ppm, respectively) constitute a “Very Unhealthy” environment, while the average values for all three values (83.91 μg/m<sup>3</sup>, 121.69 μg/m<sup>3</sup> and 614.19 ppm, respectively) are “Unhealthy” for PM<sub>2.5</sub> and “Moderate” for PM<sub>10</sub> and CO<sub>2</sub>. The HCHO value was determined to be safe throughout all measurements and it does not pose a risk to human health. The “Very Unhealthy” PM<sub>2.5</sub> value indicates that forest workers working in debarking operations are in a risky working environment in terms of respiratory diseases. It has been reported in various studies that such high values pose a great risk for problems in the lower respiratory tract (Gülci et al. 2018; Baldauf et al. 2006). In cases where the PM<sub>2.5</sub> value is high, this value must be reduced (Martins and Graca 2018).</p>
        <p>In this study, the debarking time of a timber was measured as <italic>Dt<sub>sec</sub></italic> between 45 and 273 seconds (sec) with a mean of 97.45 sec, and <italic>Wt<sub>sec</sub></italic> between 45 and 337 sec with a mean of 108.81 sec. When <italic>Dt<sub>sec</sub></italic> and <italic>Wt<sub>sec</sub></italic> values and tree characteristics were examined for their conformity to normal distribution by the Kolmogorov-Smirnov test, all values did not show normal distribution at 0.05 significance level, Therefore, Spearman’s correlation coefficient was used to determine the correlation coefficient. As a result of the correlation analysis, <italic>Dt<sub>sec</sub></italic> and <italic>Wt<sub>sec</sub></italic> values showed moderate positive correlations with <italic>Bv (m<sup>3</sup>)</italic> at 0.05 significance level, while PM<sub>2.5</sub>, PM<sub>10</sub>, CO<sub>2</sub> and HCHO did not show significant relationships. The significant relationships with <italic>Dt<sub>sec </sub></italic>and <italic>Wt<sub>sec </sub></italic>values respectively displayed were r = 0.604 and r = 0.575. The results are given in Figure 5.</p>
        <graphic mimetype="image" mime-subtype="png" xlink:href="image6.png"/>
        <p>
          <bold>Figure 5. Spearman's correlation analysis.</bold>
          <bold>Spearman's multiple correlation plot with <italic>R</italic> representing correlation coefficient and <italic>p</italic> the statistical significance (ns &gt; 0.05;*p &lt; 0.05;**p &lt; 0.01; ***p &lt; 0.001)</bold>
        </p>
        <p>Slika 5. Spearmanova korelacijska analiza. Spearmanov dijagram višestruke korelacije gdje <italic>R</italic> predstavlja koeficijent korelacije, a <italic>p</italic> statističku značajnost (ns &gt; 0,05;*p &lt; 0,05;**p &lt; 0,01;***p &lt; 0,001)</p>
        <p>In this study, with the help of backward regression, the parameters of the regression models in which <italic>Dt<sub>sec</sub></italic> and <italic>Wt<sub>sec</sub></italic> were used as dependent and other traits as independent variables were calculated and their prediction success was determined. The parameter equations and Durbin-Watson (DW) test statistic, <italic>R<sup>2</sup><sub>adj</sub></italic>, <italic>MAE</italic> and <italic>RMSE</italic> values and other statistical measures for these equations are presented in Table 6. When Table 6 is analyzed, the goodness of fit of the models is analyzed by <italic>F</italic> test and the significance of the model coefficients is analyzed by <italic>t</italic> test, and all parameters of the models are found to be significant at 0.05 significance level. DW test statistic values for <italic>Dt<sub>sec</sub></italic> and <italic>Wt<sub>sec</sub></italic> models are 1.733 and 1.768, <italic>R<sup>2</sup><sub>adj</sub></italic> values are 0.617 and 0.715, <italic>MAE</italic> values are 16.909 and 13.929, and <italic>RMSE</italic> values are 20.599 and 19.664, respectively.</p>
        <p>
          <bold>Table 6. Regression analysis results</bold>
        </p>
        <p>Tablica 6. Rezultati regresijske analize</p>
        <table-wrap>
          <table>
            <thead>
              <tr>
                <th>
                  <p>
                    <italic>
                      <bold>No</bold>
                    </italic>
                  </p>
                </th>
                <th>
                  <p>
                    <bold>
                      <italic>R</italic>
                      <sup>2</sup>
                      <italic>
                        <sub>adj</sub>
                      </italic>
                    </bold>
                  </p>
                </th>
                <th>
                  <italic>
                    <bold>MAE</bold>
                  </italic>
                </th>
                <th>
                  <italic>
                    <bold>RMSE</bold>
                  </italic>
                </th>
                <th>
                  <italic>
                    <bold>F</bold>
                  </italic>
                </th>
                <th>
                  <italic>
                    <bold>p</bold>
                  </italic>
                </th>
                <th>
                  <italic>
                    <bold>b<sub>0</sub></bold>
                  </italic>
                </th>
                <th>
                  <p>
                    <italic>
                      <bold>b<sub>1</sub></bold>
                    </italic>
                  </p>
                </th>
                <th>
                  <italic>
                    <bold>b<sub>2</sub></bold>
                  </italic>
                </th>
                <th>
                  <italic>
                    <bold>b<sub>3</sub></bold>
                  </italic>
                </th>
              </tr>
            </thead>
            <tbody>
              <tr>
                <td colspan="10">
                  <p>Debarking time model</p>
                  <p>Durbin-Watson = 1.733</p>
                </td>
              </tr>
              <tr>
                <td>
                  <p>D-1</p>
                </td>
                <td>
                  <p>0.617</p>
                </td>
                <td>16.909</td>
                <td>20.599</td>
                <td>23.56</td>
                <td>
                  <p>0.000</p>
                </td>
                <td>48.32***</td>
                <td>1196.67***</td>
                <td>-0.261*</td>
                <td>0.030**</td>
              </tr>
              <tr>
                <td colspan="10">
                  <p>Work time model</p>
                  <p>Durbin-Watson = 1.768</p>
                </td>
              </tr>
              <tr>
                <td>
                  <p>D-2</p>
                </td>
                <td>
                  <p>0.715</p>
                </td>
                <td>13.929</td>
                <td>19.664</td>
                <td>36.09</td>
                <td>
                  <p>0.000</p>
                </td>
                <td>56.81***</td>
                <td>29080.29***</td>
                <td>-0.356***</td>
                <td>0.032***</td>
              </tr>
            </tbody>
          </table>
        </table-wrap>
        <p>ns: p&gt;0.05, *: p&lt;0.05, **: p&lt;0.01, ***: p&lt; 0.001</p>
        <p>In order to check the validity of the models that were found to be successful according to the statistical criteria, with the help of the control data created by separating 15% of the data, the Wilcoxon signed rank test for paired samples (Wilcoxon signed rank test) compared the data obtained from the equations with the actual values and no statistical difference was found at the 0.05 level of significance (Table 7). Thus, it was decided that the established models were usable at 0.05 significance level.</p>
        <p>
          <bold>Table 7.</bold>
          <bold>Wilcoxon signed rank</bold>
          <bold>test results for equations</bold>
        </p>
        <p>Tablica 7. Rezulati Wilcoxonova testa ranka za jednadžbe</p>
        <table-wrap>
          <table>
            <thead>
              <tr>
                <th>
                  <bold>No</bold>
                </th>
                <th>
                  <italic>
                    <bold>Z</bold>
                  </italic>
                </th>
                <th>
                  <italic>
                    <bold>p</bold>
                  </italic>
                </th>
              </tr>
            </thead>
            <tbody>
              <tr>
                <td colspan="3">Debarking time model</td>
              </tr>
              <tr>
                <td>D-1</td>
                <td>0,738</td>
                <td>0.852<italic><sup>ns</sup></italic></td>
              </tr>
              <tr>
                <td colspan="3">Work time model</td>
              </tr>
              <tr>
                <td>D-2</td>
                <td>0,460</td>
                <td>0.394<italic><sup>ns</sup></italic></td>
              </tr>
            </tbody>
          </table>
        </table-wrap>
        <p>Z: Wilcoxon signed rank test, ns: p&gt;0.05, *: p&lt;0.05, **: p&lt;0.01, ***: p&lt; 0.001</p>
        <p>As a result of the regression analysis (Table 6), the usable forms of the statistically successful D-1 and D-2 models are given below:</p>
        <p><inline-formula><alternatives><tex-math><![CDATA[\text{Dt}_{\sec} = 48.32 + 1196.67B_{v} - 0.261\text{PM}_{2.5} + 0.030\text{CO}_{2}]]></tex-math><mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:msub><mml:mtext mathvariant="normal">Dt</mml:mtext><mml:mo>sec</mml:mo></mml:msub><mml:mo>=</mml:mo><mml:mn>48.32</mml:mn><mml:mo>+</mml:mo><mml:mn>1196.67</mml:mn><mml:msub><mml:mi>B</mml:mi><mml:mi>v</mml:mi></mml:msub><mml:mo>−</mml:mo><mml:mn>0.261</mml:mn><mml:msub><mml:mtext mathvariant="normal">PM</mml:mtext><mml:mn>2.5</mml:mn></mml:msub><mml:mo>+</mml:mo><mml:mn>0.030</mml:mn><mml:msub><mml:mtext mathvariant="normal">CO</mml:mtext><mml:mn>2</mml:mn></mml:msub></mml:mrow></mml:math></alternatives></inline-formula> (D-1)</p>
        <p><inline-formula><alternatives><tex-math><![CDATA[\text{Wt}_{\sec} = 56.81 + 29080.29B_{v} - 0.356\text{PM}_{2.5} + 0.032\text{CO}_{2}]]></tex-math><mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" display="inline"><mml:mrow><mml:msub><mml:mtext mathvariant="normal">Wt</mml:mtext><mml:mo>sec</mml:mo></mml:msub><mml:mo>=</mml:mo><mml:mn>56.81</mml:mn><mml:mo>+</mml:mo><mml:mn>29080.29</mml:mn><mml:msub><mml:mi>B</mml:mi><mml:mi>v</mml:mi></mml:msub><mml:mo>−</mml:mo><mml:mn>0.356</mml:mn><mml:msub><mml:mtext mathvariant="normal">PM</mml:mtext><mml:mn>2.5</mml:mn></mml:msub><mml:mo>+</mml:mo><mml:mn>0.032</mml:mn><mml:msub><mml:mtext mathvariant="normal">CO</mml:mtext><mml:mn>2</mml:mn></mml:msub></mml:mrow></mml:math></alternatives></inline-formula> (D-2)</p>
        <p>According to these findings, the debarking time of a timber is affected by the bark volume of the debarking log, CO<sub>2</sub> and PM<sub>2.5</sub> released during debarking. The temporal variations of PM<sub>2.5</sub>, PM<sub>10</sub> and CO<sub>2</sub> values and their comparison with international threshold values are given in Figure 6, Figure 7 and Figure 8.</p>
        <graphic mimetype="image" mime-subtype="png" xlink:href="image7.png"/>
        <p>
          <bold>Figure 6. Temporal variation of PM<sub>2.5</sub> concentration</bold>
        </p>
        <p>Slika 6. Vremenska varijacija koncentracije PM<sub>2.5</sub></p>
        <graphic mimetype="image" mime-subtype="png" xlink:href="image8.png"/>
        <p>
          <bold>Figure 7. Temporal variation of PM<sub>10</sub> concentration</bold>
        </p>
        <p>Slika 7. Vremenska varijacija koncentracije PM<sub>10</sub></p>
        <graphic mimetype="image" mime-subtype="png" xlink:href="image9.png"/>
        <p>
          <bold>Figure 8. Temporal variation of CO<sub>2</sub> concentration</bold>
        </p>
        <p>Slika 8. Vremenska varijacija koncentracije CO<sub>2</sub></p>
        <p>There were two breaks during this study. The first break started at 15.15 and ended at 15.35 (20 minutes), and the second break started at 16.19 and ended at 16.52 (33 minutes). Measurements were taken continuously at one-minute intervals, including rest intervals. Changes were observed in the air quality measurements during the debarking operations (58 units). When the graphs in Figure 5, Figure 6 and Figure 7 are examined, it can be seen that PM<sub>2.5</sub>, PM<sub>10</sub> and CO<sub>2</sub> values decreased and remained approximately stable during the rest periods shown in red. Especially in the CO<sub>2</sub> graph (Figure 7), where the red line remains approximately straight, the CO<sub>2</sub> rate in the environment is within the health limits. In the PM<sub>2.5</sub> and PM<sub>10</sub> graphs, minor peaks were observed at rest times. At the same time, looking at the last parts of the PM<sub>2.5</sub> and PM<sub>10</sub> graphs, it can be seen that the particle values are gradually increasing. This means that the particulate matter suspended in the air increases. In a similar study conducted in agricultural fields, Jia et al. (2023) reported that as the hours of operation of agricultural machinery in wheat fields increased, the particulate matter in the field also increased.</p>
      </sec>
      <sec id="conclusions">
        <title>
          <bold>CONCLUSIONS</bold>
        </title>
      </sec>
      <sec id="zaključci">
        <title>ZAKLJUČCI</title>
        <p>During these debarking activities, measurements were made with Temtop M2000 air quality meter. PM<sub>2.5</sub>, PM<sub>10</sub>, CO<sub>2</sub> and HCHO values were measured throughout the debarking process and various values were found. Considering these values, it was determined that the average value of PM<sub>2.5</sub> is an “Unhealthy” environment when compared to international threshold values. The average values of PM<sub>10</sub> and CO<sub>2</sub> were found to be “Moderate” and the average value of HCHO was found to be “Safe”. It was observed that the maximum values of PM<sub>2.5</sub>, PM<sub>10</sub> and CO<sub>2</sub> created a “Very Unhealthy” environment. The high PM<sub>2.5</sub> value indicates that particles of 1.0-2.5 microns in size are dense in the environment and that these particles may cause various disorders, especially in the lower respiratory tract of working people. It is known that if the PM<sub>10</sub> value increases from “Moderate” to “Unhealthy”, it may cause upper respiratory tract diseases. For this reason, work planning by considering these values is required for intensive debarking works. In the light of this study, the recommendations are listed below:</p>
        <list list-type="bullet">
          <list-item>
            <p>Masks, which are best suited to trap PM<sub>2.5</sub> and PM<sub>10</sub> particles, must be worn by workers engaged in debarking operations in Türkiye. In addition, these workers should wear protective equipment such as glasses, hard hats, gloves, and protective pants.</p>
          </list-item>
          <list-item>
            <p>During intensive debarking operations, it is necessary to increase the frequency of rest or rest time for workers. This will allow the particles in the air to disperse and settle to the ground during non-working rest hours.</p>
          </list-item>
          <list-item>
            <p>It is important for the health of the workers involved in debarking work to undergo periodic medical check-ups and to have the necessary examinations, especially in terms of upper and lower respiratory diseases.</p>
          </list-item>
        </list>
        <p>
          <bold>ACKNOWLEDGMENT</bold>
        </p>
        <p>ZAHVALA</p>
        <p>
          We would like to thank forest engineers Ergün Tuncer, Müslim May and Osman Kulaksız for their help during the preparation of this study.
        </p>
      </sec>
    </sec>
  </body>
  <back>
    <ref-list>
      <ref>
        <mixed-citation publication-type="journal">
          <person-group>
            <string-name>- Arslan, S., Aybek, A., Ekerbiçer, H.Ç.,</string-name>
          </person-group>
          <year>2010</year>
          <article-title>Measurment of personal PM₁₀, PM_(2.5) and PM₁ exposures in tractor and combine operations and evaluation of health disturbances of operators.</article-title>
          <source>Journal of Agricultural Sciences</source>
          <volume>16</volume>
          <fpage>104</fpage>
          <lpage>115</lpage>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="journal">
          <person-group>
            <string-name>- Baldauf, R., Fortune, C., Weinstein, J., Wheeler, M., Blanchard, F.,</string-name>
          </person-group>
          <year>2006</year>
          <article-title>Air contaminant exposures during the operation of lawn and garden equipment.</article-title>
          <source>Journal of Exposure Science and Environmental Epidemiology</source>
          <volume>16</volume>
          <fpage>362</fpage>
          <lpage>370</lpage>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="web">
          <person-group>
            <string-name>- Bishop, S.,</string-name>
          </person-group>
          <year>2021</year>
          <source>Air quality measurements series: particular matter.</source>
          <ext-link>https://www.clarity.io/blog/air-quality-measurements-series-particulate-matter</ext-link>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="journal">
          <person-group>
            <string-name>- Carus, S.,</string-name>
          </person-group>
          <year>2002</year>
          <article-title>Bazı hacim formüllerinin seksiyon, gövde ve bağıl uzunluklara göre kıyaslanması.</article-title>
          <source>Süleyman Demirel Üniversitesi Orman Fakültesi Dergisi</source>
          <volume>1</volume>
          <fpage>101</fpage>
          <lpage>114</lpage>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="web">
          <person-group>
            <string-name>-</string-name>
          </person-group>
          <source>California Air Resources Board.</source>
          <date date-type="pub">
            <year>2021</year>
          </date>
          <source>Inhalable Particulate Matter and Health (PM2.5 and PM10).</source>
          <ext-link>https://ww2.arb.ca.gov/resources/inhalable-particulate-matter-and-health</ext-link>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="journal">
          <person-group>
            <string-name>- Çağlar, S.,</string-name>
          </person-group>
          <year>2021</year>
          <article-title>Work efficiency and physical workload during the manual debarking of Scotch pine trees.</article-title>
          <source>International Journal of Forest Engineering</source>
          <volume>32</volume>
          <issue>3</issue>
          <fpage>246</fpage>
          <lpage>255</lpage>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="journal">
          <person-group>
            <string-name>- Eker, M., Çoban, H.O., Acar, H.H.,</string-name>
          </person-group>
          <year>2011</year>
          <article-title>Time study and productivity analysis of chainsaw mounted log debarker in southern pine forests of Turkey.</article-title>
          <source>African Journal of Agricultural Research</source>
          <volume>6</volume>
          <issue>10</issue>
          <fpage>2146</fpage>
          <lpage>2156</lpage>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="journal">
          <person-group>
            <string-name>- Eker, M., Öztürk, E.,</string-name>
          </person-group>
          <year>2022</year>
          <article-title>Bazı kabuk soyma araçlarının verim ve kabuk soyma kalitesi açısından karşılaştırılması.</article-title>
          <source>Turkish Journal of Forestry</source>
          <volume>23</volume>
          <issue>4</issue>
          <fpage>278</fpage>
          <lpage>289</lpage>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="chapter">
          <person-group>
            <string-name>- Flores, A.S., Ward, A.M., Ruiz, M.,</string-name>
          </person-group>
          <year>2020</year>
          <chapter-title>The intersection between the dwelling environment and health and wellbeing in impoverıshed rural Puebla, Mexico.</chapter-title>
          <source>LASA2020 Virtual Congress of the Latin Amercan Studies Association</source>
          <fpage>13</fpage>
          <lpage>16</lpage>
          <publisher-loc>Mexico.</publisher-loc>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="journal">
          <person-group>
            <string-name>- Gao, G., Sun, F., Thao, N.T.T., Lun, X., Yu, X.,</string-name>
          </person-group>
          <year>2015</year>
          <article-title>Different concentrations of TSP, PM₁₀, PM_(2.5) and PM₁ of several urban forest types in different seasons.</article-title>
          <source>Pol. J. Environ. Stud.</source>
          <volume>24</volume>
          <issue>6</issue>
          <fpage>2387</fpage>
          <lpage>2395</lpage>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="book">
          <person-group>
            <string-name>- GDF.,</string-name>
          </person-group>
          <year>2023</year>
          <source>Sarıyer Orman İşletme Şefliği Amenajman Planı, İstanbul.</source>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="journal">
          <person-group>
            <string-name>- Gülci, N., Akay, A.E., Erdaş, O.,</string-name>
          </person-group>
          <year>2017</year>
          <article-title>Productivity assessment of alternative timber debarking methods.</article-title>
          <source>Sumarski List</source>
          <volume>910</volume>
          <fpage>469</fpage>
          <lpage>476</lpage>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="journal">
          <person-group>
            <string-name>- Gülci, S., Akay, A.E., Spinelli, R., Magagnotti, N.,</string-name>
          </person-group>
          <year>2018</year>
          <article-title>Assessing the exposure of chipper operators to wood dust in a roadside landing area.</article-title>
          <source>Fresenius Environmental Bulletin</source>
          <volume>27</volume>
          <issue>6</issue>
          <fpage>4132</fpage>
          <lpage>4138</lpage>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="journal">
          <person-group>
            <string-name>- Gürtan, H.,</string-name>
          </person-group>
          <year>1969</year>
          <article-title>Değişik Tipli Balta ve Kabuk Yontma Demirlerinin İş Verimleri.</article-title>
          <source>İç Anadolu Ormancılık Araştırma Enstitüsü</source>
          <volume>38</volume>
          <publisher-loc>Ankara.</publisher-loc>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="journal">
          <person-group>
            <string-name>- Jia, L., Zhou, X., Wang, Q.,</string-name>
          </person-group>
          <year>2023</year>
          <article-title>Effects of agricultural machinery operations on PM_(2.5), PM₁₀ and TSP in farmland under different tillage patterns.</article-title>
          <source>Agriculture</source>
          <volume>13930</volume>
          <fpage>1</fpage>
          <lpage>14</lpage>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation>
          <person-group>
            <string-name>- Kalaycı, Ş.,</string-name>
          </person-group>
          <year>2006</year>
          <source>SPSS Uygulamalı Çok Değişkenli İstatistik Teknikleri, Asil Yayın Dağıtım, Ankara</source>
          <fpage>975</fpage>
          <lpage>9091</lpage>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="journal">
          <person-group>
            <string-name>- Martins, N.R., Graça, G.C.,</string-name>
          </person-group>
          <year>2018</year>
          <article-title>Impact of PM_(2.5) in indoor urban environments: A review.</article-title>
          <source>Sustainable Cities and Society</source>
          <volume>42</volume>
          <fpage>259</fpage>
          <lpage>275</lpage>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="journal">
          <person-group>
            <string-name>- Menteşe, S., Çotuker, O.,</string-name>
          </person-group>
          <year>2021</year>
          <article-title>Partikül madde, karbon monoksit ve karbondioksit seviyelerinin iç ve dış ortamlarda değişimi.</article-title>
          <source>Mühendislik Bilimleri ve Tasarım Dergisi</source>
          <volume>9</volume>
          <issue>3</issue>
          <fpage>723</fpage>
          <lpage>734</lpage>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="book">
          <person-group>
            <string-name>- Müezzinoğlu, A.,</string-name>
          </person-group>
          <year>2000</year>
          <source>Hava Kirliliğinin ve Kontrolünün Esasları.</source>
          <publisher-loc>İzmir</publisher-loc>
          <publisher-name>Dokuz Eylül Yayınları.</publisher-name>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="book">
          <person-group>
            <string-name>- R Core Team.</string-name>
          </person-group>
          <year>2019</year>
          <source>R: A language and environment for statistical computing.</source>
          <publisher-loc>Vienna</publisher-loc>
          <publisher-name>R Foundation for Statistical Computing.</publisher-name>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation publication-type="journal">
          <person-group>
            <string-name>- Taş, İ., Akay, A.E.,</string-name>
          </person-group>
          <year>2022</year>
          <article-title>Evaluation of various risk factors caused by mechanized equipment used in forest operations.</article-title>
          <source>Eur. J. Forest Eng.</source>
          <volume>8</volume>
          <issue>1</issue>
          <fpage>40</fpage>
          <lpage>45</lpage>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation>
          <person-group>
            <string-name>-</string-name>
          </person-group>
          <pub-id pub-id-type="doi">URL-1.</pub-id>
          <ext-link>https://www.husqvarna.com/tr/motorlu-testereler/365/</ext-link>
          <comment>(Data accessed: 29.03.2024)</comment>
        </mixed-citation>
      </ref>
      <ref>
        <mixed-citation>
          <person-group>
            <string-name>-</string-name>
          </person-group>
          <pub-id pub-id-type="doi">URL-2.</pub-id>
          <ext-link>https://www.baseh.com/v/ (Data</ext-link>
          <comment>accessed: 29.03.2024)</comment>
        </mixed-citation>
      </ref>
    </ref-list>
  </back>
</article>
