hrcak mascot   Srce   HID

Izvorni znanstveni članak

Effective Stiffness of the Engine Room Structure in Large Container Ships

Ivo Senjanović ; Faculty of Mechanical Engineering and Naval Architecture, Zagreb
Nikola Vladimir   ORCID icon orcid.org/0000-0001-9164-1361 ; Faculty of Mechanical Engineering and Naval Architecture, Zagreb
Marko Tomić   ORCID icon orcid.org/0000-0002-6057-305X ; Faculty of Mechanical Engineering and Naval Architecture, Zagreb

Puni tekst: engleski, pdf (1 MB) str. 15-27 preuzimanja: 712* citiraj
APA 6th Edition
Senjanović, I., Vladimir, N. i Tomić, M. (2011). Effective Stiffness of the Engine Room Structure in Large Container Ships. Brodogradnja, 62 (1), 15-27. Preuzeto s https://hrcak.srce.hr/67306
MLA 8th Edition
Senjanović, Ivo, et al. "Effective Stiffness of the Engine Room Structure in Large Container Ships." Brodogradnja, vol. 62, br. 1, 2011, str. 15-27. https://hrcak.srce.hr/67306. Citirano 16.10.2021.
Chicago 17th Edition
Senjanović, Ivo, Nikola Vladimir i Marko Tomić. "Effective Stiffness of the Engine Room Structure in Large Container Ships." Brodogradnja 62, br. 1 (2011): 15-27. https://hrcak.srce.hr/67306
Harvard
Senjanović, I., Vladimir, N., i Tomić, M. (2011). 'Effective Stiffness of the Engine Room Structure in Large Container Ships', Brodogradnja, 62(1), str. 15-27. Preuzeto s: https://hrcak.srce.hr/67306 (Datum pristupa: 16.10.2021.)
Vancouver
Senjanović I, Vladimir N, Tomić M. Effective Stiffness of the Engine Room Structure in Large Container Ships. Brodogradnja [Internet]. 2011 [pristupljeno 16.10.2021.];62(1):15-27. Dostupno na: https://hrcak.srce.hr/67306
IEEE
I. Senjanović, N. Vladimir i M. Tomić, "Effective Stiffness of the Engine Room Structure in Large Container Ships", Brodogradnja, vol.62, br. 1, str. 15-27, 2011. [Online]. Dostupno na: https://hrcak.srce.hr/67306. [Citirano: 16.10.2021.]

Sažetak
Very large container ships are rather fl exible due to the large deck openings. Therefore, hydroelastic stress analysis is required as a basis for a reliable structural design. In the early design stage, the coupling of the beam model with a 3D hydrodynamic model is rational and preferable.
The calculation is performed using the modal superposition method, so natural hull modes have to be determined in a reliable way. Therefore, the advanced thin-walled girder theory, which takes the infl uence of shear on both bending and torsion into account, is applied for calculating the hull
fl exural and torsional stiffness properties. A characteristic of very large container ships is the quite short engine room, whose closed structure behaves as an open hold structure with increased torsional stiffness due to the deck effect. The paper deals with the calculation of its effective torsional stiffness parameters by utilizing the energy balance approach. Also, estimation of distortion of transverse bulkheads, as a result of torsion and warping, is given. The procedure is checked by the 3D FEM analysis of a ship-like pontoon. Such a modifi ed beam model of the engine room structure can be included in the general beam model of a ship hull for the need of hydroelastic analysis, where only a few fi rst natural frequencies and mode shapes are required. For practical use in the preliminary design stage of ship structures, the simplicity of the beam model presents an advantage over 3D FEM models.

Ključne riječi
container ship; engine room structure,; torsion; warping; distortion; thin-walled girder; analytical solution; FEM, hydroelasticity

Hrčak ID: 67306

URI
https://hrcak.srce.hr/67306

Posjeta: 1.163 *