Skoči na glavni sadržaj

Izvorni znanstveni članak

Isolation and Kinetic Characterization of Fumarase from Baker's Yeast

Z. Findrik ; Sveučilište u Zagrebu, Fakultet kemijskog inženjerstva i tehnologije, Zagreb, Hrvatska
E. Smailbegović ; Sveučilište u Zagrebu, Fakultet kemijskog inženjerstva i tehnologije, Zagreb, Hrvatska
M. Prkačin ; Sveučilište u Zagrebu, Fakultet kemijskog inženjerstva i tehnologije, Zagreb, Hrvatska
D. Vasić-Rački ; Sveučilište u Zagrebu, Fakultet kemijskog inženjerstva i tehnologije, Zagreb, Hrvatska


Puni tekst: hrvatski pdf 536 Kb

str. 273-280

preuzimanja: 700

citiraj


Sažetak

Isolation and purification of fumarase (fumarate hydratase EC 4.2.1.2) from baker’s yeast was carried out. Yeast cells were disrupted by three methods: glass beads, ultrasound, and the combination of these two methods. Cell disruption methods were compared in their efficiency in Fig. 1. Protein fractionation was carried out by precipitation with ammonium sulphate. The concentrations of ammonium sulphate necessary for fumarase precipitation were found experimentally and are presented in Fig. 2. After precipitation, fumarase samples were purified by gel filtration chromatography on columns filled with Sephadex G50 and Sephadex G100. Examples of the elution curve of one protein suspension sample on both columns are presented in Fig. 3 and Fig. 4. Only the samples having high fumarase activity were used in the next purifying step. Table 1 presents the collective results of the fumarase purification procedure. The techniques used enabled purification of fumarase with a yield of 25 %. The purified enzyme was employed in the hydration of fumaric acid to L-malic acid. Kinetic constants of fumarase were estimated and are presented in Table 2. They were determined from the experimental data measured by the initial reaction rate method. The hydration of fumaric acid to L-malic acid was carried out in a batch reactor and the results are presented in Fig. 5. The kinetic model was developed on the basis of kinetic data and reaction scheme, as presented by equations 1 and 2. It was combined with the mass balances in the batch reactor presented by equations 3 and 4. Considering that fumarase deactivation occurs, it was proposed that the activity loss could be described by a first-order kinetic model (equation 5). Fumarase activity was followed during the batch experiment by the enzyme assay and it was found that activity decay occurs. Deactivation constant was estimated from the independent experimental results and found to be 0.0031 min–1.

Ključne riječi

fumarase; baker's yeast; isolation

Hrčak ID:

81507

URI

https://hrcak.srce.hr/81507

Datum izdavanja:

22.5.2012.

Podaci na drugim jezicima: hrvatski

Posjeta: 1.524 *