Tehnički vjesnik, Vol. 19 No. 3, 2012.
Izvorni znanstveni članak
On the preparation of precursors and carriers of nanoparticles by water jet technology
Libor Sitek
; Institute of Geonics of the ASCR, v.v.i., Institute of Clean Technologies for Mining and Utilization of Raw Materials for Energy Use, Studentská 1768, 708 00 Ostrava - Poruba, Czech Republic
Josef Foldyna
orcid.org/0000-0003-4288-445X
; Institute of Geonics of the ASCR, v.v.i., Institute of Clean Technologies for Mining and Utilization of Raw Materials for Energy Use, Studentská 1768, 708 00 Ostrava - Poruba, Czech Republic
Petr Martinec
; Institute of Geonics of the ASCR, v.v.i., Institute of Clean Technologies for Mining and Utilization of Raw Materials for Energy Use, Studentská 1768, 708 00 Ostrava - Poruba, Czech Republic
Jiří Klich
; Institute of Geonics of the ASCR, v.v.i., Institute of Clean Technologies for Mining and Utilization of Raw Materials for Energy Use, Studentská 1768, 708 00 Ostrava - Poruba, Czech Republic
Miroslav Mašláň
; Palacký University in Olomouc, Faculty of Sciences, Křížkovského 8, 771 47 Olomouc, Czech Republic
Sažetak
High-velocity water jet expanded into many fields of human activity due to its unique properties. Besides already traditional technological processes it begins to find its way also to the comminution of mineral particles. The paper analyzes the possibility of particle comminution using an abrasive mixing head used to generate high-velocity abrasive water jet and an impact of the jet to the solid perpendicular target made from tungsten carbide. Phyllosilicate (i.e. layered silicate) particles of both micron and submicron sizes were made by this method. The method avoids the formation of secondary structural defects which is in contrast to mechanical methods of particles comminution. Several types of micas (muscovites, vermiculite and biotite) and fine-grained kaolinites were comminuted using high-velocity water jet technology. The paper also deals with the possibilities of further change of silicate particles grain size and of using such prepared particles as precursors or carriers of nanoparticles.
Ključne riječi
carriers of nanoparticles; particle disintegration; precursors of nanoparticles; water jet
Hrčak ID:
86716
URI
Datum izdavanja:
19.9.2012.
Posjeta: 1.941 *