Skoči na glavni sadržaj

Prethodno priopćenje

Optimal replacement time estimation for machines and equipment based on cost function

J. Šebo ; Faculty of Mechanical Engineering, Technical University in Košice, Slovakia
J. Buša ; Faculty of Electrical Engineering and Informatics, Technical University in Košice, Slovakia
P. Demeč ; Faculty of Mechanical Engineering, Technical University in Košice, Slovakia
J. Svetlík ; Faculty of Mechanical Engineering, Technical University in Košice, Slovakia


Puni tekst: engleski pdf 174 Kb

str. 119-122

preuzimanja: 2.106

citiraj


Sažetak

The article deals with a multidisciplinary issue of estimating the optimal replacement time for the machines. Considered categories of machines, for which the optimization method is usable, are of the metallurgical and engineering production. Different models of cost function are considered (both with one and two variables). Parameters of the models were calculated through the least squares method. Models testing show that all are good enough, so for estimation of optimal replacement time is sufficient to use simpler models. In addition to the testing of models we developed the method (tested on selected simple model) which enable us in actual real time (with limited data set) to indicate the optimal replacement time. The indicated time moment is close enough to the optimal replacement time t*.

Ključne riječi

machine replacement time; estimation; cost function

Hrčak ID:

86782

URI

https://hrcak.srce.hr/86782

Datum izdavanja:

1.1.2013.

Posjeta: 2.628 *