Izvorni znanstveni članak
https://doi.org/10.5599/jese.2012.0023
A new amperometric glucose biosensor based on screen printed carbon electrodes with rhenium(IV) - oxide as a mediator
Albana Veseli
; Department of Chemistry, Faculty of Natural Science, University of Prishtina, Nëna Terezë, 10000, Prishtina Kosovo
Ahmet Hajrizi
; Institute of Chemistry, Analytical Chemistry, Karl-Franzens University of Graz, Universitätsplatz 1, 8010 Graz
Tahir Arbneshi
; Department of Chemistry, Faculty of Natural Science, University of Prishtina, Nëna Terezë, 10000, Prishtina Kosovo
Kurt Kalcher
; Institute of Chemistry, Analytical Chemistry, Karl-Franzens University of Graz, Universitätsplatz 1, 8010 Graz
Sažetak
Rhenium(IV)-oxide, ReO2, was used as a mediator for carbon paste (CPE) and screen printed carbon (SPCE) electrodes for the catalytic amperometric determination of hydro-gen peroxide, whose overpotential for the reduction could be lowered to -0.1 V vs. Ag/AgCl in flow injection analysis (FIA) using phosphate buffer (0.1 M, pH=7.5) as a carrier. For hydrogen peroxide a detection limit (3σ) of 0.8 mg L-1 could be obtained. ReO2-modified SPCEs were used to design biosensors with a template enzyme, i.e. glucose oxidase, entrapped in a Nafion membrane. The resulting glucose sensor showed a linear dynamic range up to 200 mg L-1 glucose with a detection limit (3σ) of 0.6 mg L-1. The repeatability was 2.1 % RSD (n = 5 measurements), the reproducibility 5.4 % (n = 5 sensors). The sensor could be applied for the determination of glucose in blood serum in good agreement with a reference method.
Ključne riječi
Biosensor; glucose; hydrogen peroxide; rhenium(iv)-oxide; blood serum
Hrčak ID:
91145
URI
Datum izdavanja:
10.11.2012.
Posjeta: 1.823 *