hrcak mascot   Srce   HID

Prethodno priopćenje

Porous ceramic - metal composites obtained by infiltration methods

A. Boczkowska ; Warsaw University of Technology, Faculty of Materials Science and Engineering, Warsaw, Poland
P. Chabera ; Warsaw University of Technology, Faculty of Materials Science and Engineering, Warsaw, Poland
A. J. Dolata ; Silesian University of Technology, Faculty of Materials Science and Metallurgy, Katowice, Poland
M. Dyzia ; Silesian University of Technology, Faculty of Materials Science and Metallurgy, Katowice, Poland
A. Oziębło ; Institute of Ceramics and Construction Materials, Katowice, Poland

Puni tekst: engleski, pdf (747 KB) str. 345-348 preuzimanja: 744* citiraj
APA 6th Edition
Boczkowska, A., Chabera, P., Dolata, A.J., Dyzia, M. i Oziębło, A. (2013). Porous ceramic - metal composites obtained by infiltration methods. Metalurgija, 52 (3), 345-348. Preuzeto s https://hrcak.srce.hr/95773
MLA 8th Edition
Boczkowska, A., et al. "Porous ceramic - metal composites obtained by infiltration methods." Metalurgija, vol. 52, br. 3, 2013, str. 345-348. https://hrcak.srce.hr/95773. Citirano 28.05.2020.
Chicago 17th Edition
Boczkowska, A., P. Chabera, A. J. Dolata, M. Dyzia i A. Oziębło. "Porous ceramic - metal composites obtained by infiltration methods." Metalurgija 52, br. 3 (2013): 345-348. https://hrcak.srce.hr/95773
Harvard
Boczkowska, A., et al. (2013). 'Porous ceramic - metal composites obtained by infiltration methods', Metalurgija, 52(3), str. 345-348. Preuzeto s: https://hrcak.srce.hr/95773 (Datum pristupa: 28.05.2020.)
Vancouver
Boczkowska A, Chabera P, Dolata AJ, Dyzia M, Oziębło A. Porous ceramic - metal composites obtained by infiltration methods. Metalurgija [Internet]. 2013 [pristupljeno 28.05.2020.];52(3):345-348. Dostupno na: https://hrcak.srce.hr/95773
IEEE
A. Boczkowska, P. Chabera, A.J. Dolata, M. Dyzia i A. Oziębło, "Porous ceramic - metal composites obtained by infiltration methods", Metalurgija, vol.52, br. 3, str. 345-348, 2013. [Online]. Dostupno na: https://hrcak.srce.hr/95773. [Citirano: 28.05.2020.]

Sažetak
A pressure-vacuum infiltration (T = 720 ºC, p = 15 MPa, t = 15 min) and gas-pressure infiltration (GPI) in an autoclave (T = 700ºC, p=4 MPa, t=5 min) were applied for infiltration of porous Al2O3 ceramics by cast aluminum alloy. Effect of the method of the infiltration on the microstructure and mechanical properties of ceramic-metal composites, was studied. Ceramic preforms were formed by method of copying the cellular structure of the polymer matrix. The results of the X-ray tomography proved very good infiltration of the pores by the metal for each method.

Ključne riječi
porous ceramics; cast aluminum alloy; composite; pressure infiltration

Hrčak ID: 95773

URI
https://hrcak.srce.hr/95773

Posjeta: 921 *