Izvorni znanstveni članak

EXPERIMENTAL AND FEM ANALYSIS OF SINTERED STEEL WORM GEAR WEAR

Aleksandar Miltenović orcid.org/0000-0002-1453-2548 ; Faculty of Mechanical Engineering, University of Niš, Niš, Serbia
Vlastimir Nikolić ; Faculty of Mechanical Engineering, University of Niš, Niš, Serbia
Miloš Milovančević ; Faculty of Mechanical Engineering, University of Niš, Niš, Serbia
Milan Banić ; Faculty of Mechanical Engineering, University of Niš, Niš, Serbia

Sažetak

Crossed helical gears with steel worms and sintered steel wheels are widely used in motor vehicles and household appliances. Besides the experimental study of a prototype transmission, the simulation using the finite element method (FEM) is another possibility to test gears under load in the design phase and to optimize them. As part of this paper, a piece of software was developed that enables calculation of wear-related variables, such as the Hertzian stress σH, the minimum lubrication film thickness hmin and the glide path sg, for every single point of the contact between worm and worm gear.

Ključne riječi

sintered steel; transmission; gear; FEM

Hrčak ID:

96587

URI

https://hrcak.srce.hr/96587

Datum izdavanja:

5.2.2013.

Posjeta: 2.059 *