Izvorni znanstveni članak

https://doi.org/10.2478/acph-2013-0020

Optimization of process variables for phyllanthin extraction from Phyllanthus amarus leaves by supercritical fluid using a Box-Behnken experimental design followed by HPLC identification

AJIT A. PATIL ; Pharmaceutical Technology Division, Department of Chemical Technology, Dr. Babasaheb Ambedkar Marathwada University, Aurangabad-431004, India
SACHIN S. BHUSARI ; Pharmaceutical Technology Division, Department of Chemical Technology, Dr. Babasaheb Ambedkar Marathwada University, Aurangabad-431004, India
DEVANAND B. SHINDE ; Pharmaceutical Technology Division, Department of Chemical Technology, Dr. Babasaheb Ambedkar Marathwada University, Aurangabad-431004, India
PRAVIN S. WAKTE ; Pharmaceutical Technology Division, Department of Chemical Technology, Dr. Babasaheb Ambedkar Marathwada University, Aurangabad-431004, India

Sažetak

The response surface methodology using the Box-Behnken design was established to describe supercritical carbon dioxide assisted extraction of phyllanthin from Phyllanthus amarus Schum and Thonn leaves prior to HPLC analysis. The effects of extraction pressure, temperature, modifier concentration and extraction time on the yield of phyllanthin were investigated. By solving the regression equation, the optimum conditions were as follows: extraction pressure 23.2 MPa, temperature 40 °C, methanol as modifier at a concentration 10 % and time 90 min. Under these conditions, the phyllanthin yield was 12.83 ± 0.28 mg g-1, which was in good agreement with the predicted values. Modifier concentration and extraction time showed a significant effect on the phyllanthin yield.

Ključne riječi

phyllanthin; Phyllanthus amarus (Euphorbiaceae); supercritical carbon dioxide assisted extraction; Box-Behnken design; HPLC

Hrčak ID:

97697

URI

https://hrcak.srce.hr/97697

Datum izdavanja:

30.6.2013.

Posjeta: 2.290 *