Skoči na glavni sadržaj

Stručni rad

A Continuous Process Improvement Application in Shipbuilding

Murat OZKOK ; Department of Naval Architecture and Marine Engineering, Karadeniz Technical University, 61530 Camburnu/Trabzon/Turkey
I. Hakki HELVACIOGLU ; Faculty of Naval Architecture and Ocean Engineering, Istanbul Technical University, 34469, Maslak/Istanbul, Turkey


Puni tekst: engleski pdf 274 Kb

str. 31-39

preuzimanja: 1.207

citiraj


Sažetak

There is hard competitive environment in production industry and shipyards have a lot of competitors. Under these circumstances, the process improvement operations are very signifi cant in shipbuilding industry. In recent years, shipyards have been attempting to improve their processes by investigating their current production system so that they can keep their competitive power in global extent. Shipyards seek to decrease the cycle time of the interim products in order to
increase the annual production capacity and the market share of the shipyard. In order to do this, shipyards have to analyze their own production system and perform some improvements on the
current production system. In this study, the process improvement model is presented. The process improvement model consists of the continuous improvement method, OPT (Optimized Production
Technology), and simulation. The phases in the model were implemented for a double bottom block of a container ship. As a result, by doing some improvements on the current production system,
the cycle time of the double bottom block was shortened. The rate of the improvement of the cycle time is about 100% in theory. The results of the study are discussed in the fi nal section.

Ključne riječi

continuous improvement; OPT, shipbuilding; shipyard; ship production, simulation

Hrčak ID:

99874

URI

https://hrcak.srce.hr/99874

Datum izdavanja:

31.3.2013.

Posjeta: 1.916 *