hrcak mascot   Srce   HID

Prethodno priopćenje

Service life of a pressure mould with heat-barrier and anti-erosion coating

A. W. Orłowicz ; Rzeszow University of Technology, Department of Casting and Welding, Rzeszów, Poland
M. Mróz ; Rzeszow University of Technology, Department of Casting and Welding, Rzeszów, Poland
M. Tupaj ; Rzeszow University of Technology, Department of Casting and Welding, Rzeszów, Poland

Puni tekst: engleski, pdf (936 KB) str. 41-43 preuzimanja: 283* citiraj
APA 6th Edition
Orłowicz, A.W., Mróz, M. i Tupaj, M. (2014). Service life of a pressure mould with heat-barrier and anti-erosion coating. Metalurgija, 53 (1), 41-43. Preuzeto s https://hrcak.srce.hr/104370
MLA 8th Edition
Orłowicz, A. W., et al. "Service life of a pressure mould with heat-barrier and anti-erosion coating." Metalurgija, vol. 53, br. 1, 2014, str. 41-43. https://hrcak.srce.hr/104370. Citirano 28.02.2020.
Chicago 17th Edition
Orłowicz, A. W., M. Mróz i M. Tupaj. "Service life of a pressure mould with heat-barrier and anti-erosion coating." Metalurgija 53, br. 1 (2014): 41-43. https://hrcak.srce.hr/104370
Harvard
Orłowicz, A.W., Mróz, M., i Tupaj, M. (2014). 'Service life of a pressure mould with heat-barrier and anti-erosion coating', Metalurgija, 53(1), str. 41-43. Preuzeto s: https://hrcak.srce.hr/104370 (Datum pristupa: 28.02.2020.)
Vancouver
Orłowicz AW, Mróz M, Tupaj M. Service life of a pressure mould with heat-barrier and anti-erosion coating. Metalurgija [Internet]. 2014 [pristupljeno 28.02.2020.];53(1):41-43. Dostupno na: https://hrcak.srce.hr/104370
IEEE
A.W. Orłowicz, M. Mróz i M. Tupaj, "Service life of a pressure mould with heat-barrier and anti-erosion coating", Metalurgija, vol.53, br. 1, str. 41-43, 2014. [Online]. Dostupno na: https://hrcak.srce.hr/104370. [Citirano: 28.02.2020.]

Sažetak
The present paper deals with the issue of determination of the cause of wear of a thermally processed and nitrided pressure mould with (Ti, Al)(C, N) coating. It was found that the service life of the (Ti, Al)(C, N) coating was affected neither by the substrate surface irregularities nor presence of non-metallic inclusions. It can be supposed that the use of a thicker coat can be favourable in view of mitigation of the effect of sudden mould temperature changes in the course of pouring and mould surface cooling down.

Ključne riječi
pressure mould; coating of M(C, N) type; metallography; surface roughness

Hrčak ID: 104370

URI
https://hrcak.srce.hr/104370

Posjeta: 439 *