hrcak mascot   Srce   HID

Stručni rad

Determination of terminal hinge axis

Thomas Reiber ; Poliklinik für Prothetik Klinik für Zahn-, Mund- und Kieferkrankheiten, Johanes Gutenberg Universität, Mainz
Hans Günter Weimar ; Poliklinik für Prothetik Klinik für Zahn-, Mund- und Kieferkrankheiten, Johanes Gutenberg Universität, Mainz
Vladimir Bjelopavlović ; Poliklinik für Prothetik Klinik für Zahn-, Mund- und Kieferkrankheiten, Johanes Gutenberg Universität, Mainz
Reiner Getzmann ; Poliklinik für Prothetik Klinik für Zahn-, Mund- und Kieferkrankheiten, Johanes Gutenberg Universität, Mainz

Puni tekst: hrvatski, pdf (9 MB) str. 229-238 preuzimanja: 484* citiraj
APA 6th Edition
Reiber, T., Weimar, H.G., Bjelopavlović, V. i Getzmann, R. (1988). Mogućnosti i granice montaže modela čeljusti orijentiranih prema šarnirskoj osi. Acta stomatologica Croatica, 22 (3), 229-238. Preuzeto s https://hrcak.srce.hr/105089
MLA 8th Edition
Reiber, Thomas, et al. "Mogućnosti i granice montaže modela čeljusti orijentiranih prema šarnirskoj osi." Acta stomatologica Croatica, vol. 22, br. 3, 1988, str. 229-238. https://hrcak.srce.hr/105089. Citirano 05.12.2020.
Chicago 17th Edition
Reiber, Thomas, Hans Günter Weimar, Vladimir Bjelopavlović i Reiner Getzmann. "Mogućnosti i granice montaže modela čeljusti orijentiranih prema šarnirskoj osi." Acta stomatologica Croatica 22, br. 3 (1988): 229-238. https://hrcak.srce.hr/105089
Harvard
Reiber, T., et al. (1988). 'Mogućnosti i granice montaže modela čeljusti orijentiranih prema šarnirskoj osi', Acta stomatologica Croatica, 22(3), str. 229-238. Preuzeto s: https://hrcak.srce.hr/105089 (Datum pristupa: 05.12.2020.)
Vancouver
Reiber T, Weimar HG, Bjelopavlović V, Getzmann R. Mogućnosti i granice montaže modela čeljusti orijentiranih prema šarnirskoj osi. Acta stomatologica Croatica [Internet]. 1988 [pristupljeno 05.12.2020.];22(3):229-238. Dostupno na: https://hrcak.srce.hr/105089
IEEE
T. Reiber, H.G. Weimar, V. Bjelopavlović i R. Getzmann, "Mogućnosti i granice montaže modela čeljusti orijentiranih prema šarnirskoj osi", Acta stomatologica Croatica, vol.22, br. 3, str. 229-238, 1988. [Online]. Dostupno na: https://hrcak.srce.hr/105089. [Citirano: 05.12.2020.]

Sažetak
The terminal hinge axis can be determined in two ways, i.e. by an exact method and by the method of average hinge axis. In this study, the Lauritzen-set and SAM buccal arch with metal plates and graph paper were used for accurate localization of the hinge axis. Accuracy to which the hinge axis can be determined and incongruity between the hinge axis and articulator axis, which should be taken into account when using the method of average hinge axis, were investigated in this study. The values obtained on the lower model fitting against the exactly determined hinge axis varied by ± 8 mm from the mean value in the sagittal and vertical planes. The mean aberration of the values obtained with model fitting against the average hinge axis from the mean values obtained with model fitting against the exactly determined hinge axis was 4.7 mm in the sagittal plane.

Ključne riječi
hinge axis; model fitting

Hrčak ID: 105089

URI
https://hrcak.srce.hr/105089

[hrvatski]

Posjeta: 727 *