Pregledni rad

Production and application of metal foams in casting technology

Branko Bauer ; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lučića 1, 10 000 Zagreb, Croatia
Slobodan Kralj ; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lučića 1, 10 000 Zagreb, Croatia
Matija Bušić orcid.org/0000-0003-4027-3479 ; University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Ivana Lučića 1, 10 000 Zagreb, Croatia

Sažetak

Problems in the production of metal foams arise from the lack of knowledge in the control of process parameters. The results are frequently uneven and unpredictable variations in the structure and properties of semi products and final products. This paper comprises all production processes for metal foams and the most commonly used processes are described. Production of metal foams is continuously developing and in parallel are being developed the utilization methods of metal foams due to their specific properties. All the positive characteristics of metal foams, which make them suitable for the use in a variety of designs and products, are described in this paper. Benefits of using metal foams as a casting core material are clarified. Technologies for producing metal foam cores, positioning of cores and mould designs are presented. Casting technologies with metal foam cores and applications are described along with samples of aluminium foam cores.

Ključne riječi

casting core; die casting; impact energy; metal foam

Hrčak ID:

112333

URI

https://hrcak.srce.hr/112333

Datum izdavanja:

20.12.2013.

Podaci na drugim jezicima: hrvatski

Posjeta: 5.751 *