hrcak mascot   Srce   HID

Prethodno priopćenje
https://doi.org/10.5552/drind.2013.1248

The fracture moment of corner joints bonded by different glues

Jasna Hrovatin   ORCID icon orcid.org/0000-0003-1048-5593 ; Academy of Design, Ljubljana, Slovenia
Anton Zupančič   ORCID icon orcid.org/0000-0001-8807-2882 ; University of Ljubljana, Biotechnical Faculty, Department of Wood Science and Technology, Ljubljana, Slovenia
Milan Šernek ; University of Ljubljana, Biotechnical Faculty, Department of Wood Science and Technology, Ljubljana, Slovenia
Leon Oblak ; University of Ljubljana, Biotechnical Faculty, Department of Wood Science and Technology, Ljubljana, Slovenia

Puni tekst: hrvatski, pdf (597 KB) str. 335-340 preuzimanja: 756* citiraj
APA 6th Edition
Hrovatin, J., Zupančič, A., Šernek, M. i Oblak, L. (2013). Usporedba momenta loma kutnog spoja izvedenoga upotrebom različitih ljepila. Drvna industrija, 64 (4), 335-340. https://doi.org/10.5552/drind.2013.1248
MLA 8th Edition
Hrovatin, Jasna, et al. "Usporedba momenta loma kutnog spoja izvedenoga upotrebom različitih ljepila." Drvna industrija, vol. 64, br. 4, 2013, str. 335-340. https://doi.org/10.5552/drind.2013.1248. Citirano 25.06.2021.
Chicago 17th Edition
Hrovatin, Jasna, Anton Zupančič, Milan Šernek i Leon Oblak. "Usporedba momenta loma kutnog spoja izvedenoga upotrebom različitih ljepila." Drvna industrija 64, br. 4 (2013): 335-340. https://doi.org/10.5552/drind.2013.1248
Harvard
Hrovatin, J., et al. (2013). 'Usporedba momenta loma kutnog spoja izvedenoga upotrebom različitih ljepila', Drvna industrija, 64(4), str. 335-340. https://doi.org/10.5552/drind.2013.1248
Vancouver
Hrovatin J, Zupančič A, Šernek M, Oblak L. Usporedba momenta loma kutnog spoja izvedenoga upotrebom različitih ljepila. Drvna industrija [Internet]. 2013 [pristupljeno 25.06.2021.];64(4):335-340. https://doi.org/10.5552/drind.2013.1248
IEEE
J. Hrovatin, A. Zupančič, M. Šernek i L. Oblak, "Usporedba momenta loma kutnog spoja izvedenoga upotrebom različitih ljepila", Drvna industrija, vol.64, br. 4, str. 335-340, 2013. [Online]. https://doi.org/10.5552/drind.2013.1248

Sažetak
The main goal of this research is to determine the most appropriate adhesive to fix angular joints with wooden ring for manufacturing window frames. The joint with wooden ring is the result of Slovenian experience and is protected by international patent. The destructive strength of angular joints adhered with different glues was tested by the tensile-testing machine. Polyvinyl acetate glue of the D3 group was found to be the most appropriate from the point of view of strength. The biggest advantage of using a joint with wooden ring lies in the possibility of manufacturing wooden frames from finished elements. In this way, the process of manufacturing a window ends after assembling its parts. It is, therefore, very important to choose the right glue that can completely fill the junction and cover the whole unprotected front part of the joint. For this purpose, polyurethane glues were used in the experiment, as they slightly expand during the hardening phase.

Ključne riječi
window; construction; joint; wood; glue

Hrčak ID: 112674

URI
https://hrcak.srce.hr/112674

[hrvatski]

Posjeta: 1.101 *