Prethodno priopćenje

Use of alternative scanning devices for creation of 3D models of machine parts

Jozef Novak-Marcincin ; Faculty of Manufacturing Technologies of Technical University of Kosice with a seat in Presov, Bayerova 1, 080 01 Presov, Slovak Republic
Jozef Torok ; Faculty of Manufacturing Technologies of Technical University of Kosice with a seat in Presov, Bayerova 1, 080 01 Presov, Slovak Republic
Ludmila Novakova-Marcincinova ; Faculty of Manufacturing Technologies of Technical University of Kosice with a seat in Presov, Bayerova 1, 080 01 Presov, Slovak Republic
Jozef Barna ; Faculty of Manufacturing Technologies of Technical University of Kosice with a seat in Presov, Bayerova 1, 080 01 Presov, Slovak Republic
Miroslav Janak ; Faculty of Manufacturing Technologies of Technical University of Kosice with a seat in Presov, Bayerova 1, 080 01 Presov, Slovak Republic

Sažetak

Capturing of 3D information about any kind of surface is currently a big challenge. A few proven commercial techniques and technologies are in use for a couple of years, but needed hardware and software are still too expensive for ordinary users of PC. This article provides a few cheaper alternatives based on open source elements to commercial non-contact 3D scanners and proves that the obtained data are suitable not only for hobby home spatial digitization but also for requisites in the industry. In various parts of the contribution there is a brief description of digitization process with mentioned freeware and shareware applications.

Ključne riječi

digitization; software David; software Kinect; 3D scanner

Hrčak ID:

116591

URI

https://hrcak.srce.hr/116591

Datum izdavanja:

21.2.2014.

Podaci na drugim jezicima: hrvatski

Posjeta: 2.336 *