hrcak mascot   Srce   HID

Izvorni znanstveni članak

Physical modelling of the process of mixing liquid metal in a tundish blown by gas

J. Pieprzyca ; Silesian University of Technology, Department of Metallurgy, Katowice, Poland
T. Merder ; Silesian University of Technology, Department of Metallurgy, Katowice, Poland
M. Saternus ; Silesian University of Technology, Department of Metallurgy, Katowice, Poland

Puni tekst: engleski, pdf (883 KB) str. 327-330 preuzimanja: 350* citiraj
APA 6th Edition
Pieprzyca, J., Merder, T. i Saternus, M. (2014). Physical modelling of the process of mixing liquid metal in a tundish blown by gas. Metalurgija, 53 (3), 327-330. Preuzeto s https://hrcak.srce.hr/119543
MLA 8th Edition
Pieprzyca, J., et al. "Physical modelling of the process of mixing liquid metal in a tundish blown by gas." Metalurgija, vol. 53, br. 3, 2014, str. 327-330. https://hrcak.srce.hr/119543. Citirano 21.09.2020.
Chicago 17th Edition
Pieprzyca, J., T. Merder i M. Saternus. "Physical modelling of the process of mixing liquid metal in a tundish blown by gas." Metalurgija 53, br. 3 (2014): 327-330. https://hrcak.srce.hr/119543
Harvard
Pieprzyca, J., Merder, T., i Saternus, M. (2014). 'Physical modelling of the process of mixing liquid metal in a tundish blown by gas', Metalurgija, 53(3), str. 327-330. Preuzeto s: https://hrcak.srce.hr/119543 (Datum pristupa: 21.09.2020.)
Vancouver
Pieprzyca J, Merder T, Saternus M. Physical modelling of the process of mixing liquid metal in a tundish blown by gas. Metalurgija [Internet]. 2014 [pristupljeno 21.09.2020.];53(3):327-330. Dostupno na: https://hrcak.srce.hr/119543
IEEE
J. Pieprzyca, T. Merder i M. Saternus, "Physical modelling of the process of mixing liquid metal in a tundish blown by gas", Metalurgija, vol.53, br. 3, str. 327-330, 2014. [Online]. Dostupno na: https://hrcak.srce.hr/119543. [Citirano: 21.09.2020.]

Sažetak
The article presents results of physical modelling of phenomena occurring during the process of blowing steel by inert gases. The aim of the research was to determine the optimal ceramic material for the porous plugs. Three different materials varying in porosity were tested. Water model of industrial tundish with nominal capacity 320 Mg was used in research. This model was made at 1:10 geometrical scale. Results of the research were presented graphically in the form of Resistance Time Distribution (RTD) curves and graphs of mixing efficiency for particular ceramic materials.

Ključne riječi
steel; physical modelling; ladle metallurgy; blowing by argon

Hrčak ID: 119543

URI
https://hrcak.srce.hr/119543

Posjeta: 482 *