hrcak mascot   Srce   HID

Prethodno priopćenje

Using of ultrasonic methods for determination of the elastic moduli on the Ti-Ni based alloys

I. Szurman ; VŠB – Technical University of Ostrava, Faculty of Metallurgy and Material Engineering, Ostrava – Poruba, Czech Republic
R. Kocich ; VŠB – Technical University of Ostrava, Faculty of Metallurgy and Material Engineering, Ostrava – Poruba, Czech Republic
M. Kursa ; VŠB – Technical University of Ostrava, Faculty of Metallurgy and Material Engineering, Ostrava – Poruba, Czech Republic

Puni tekst: engleski, pdf (1 MB) str. 357-360 preuzimanja: 350* citiraj
APA 6th Edition
Szurman, I., Kocich, R. i Kursa, M. (2014). Using of ultrasonic methods for determination of the elastic moduli on the Ti-Ni based alloys. Metalurgija, 53 (3), 357-360. Preuzeto s https://hrcak.srce.hr/119551
MLA 8th Edition
Szurman, I., et al. "Using of ultrasonic methods for determination of the elastic moduli on the Ti-Ni based alloys." Metalurgija, vol. 53, br. 3, 2014, str. 357-360. https://hrcak.srce.hr/119551. Citirano 17.09.2021.
Chicago 17th Edition
Szurman, I., R. Kocich i M. Kursa. "Using of ultrasonic methods for determination of the elastic moduli on the Ti-Ni based alloys." Metalurgija 53, br. 3 (2014): 357-360. https://hrcak.srce.hr/119551
Harvard
Szurman, I., Kocich, R., i Kursa, M. (2014). 'Using of ultrasonic methods for determination of the elastic moduli on the Ti-Ni based alloys', Metalurgija, 53(3), str. 357-360. Preuzeto s: https://hrcak.srce.hr/119551 (Datum pristupa: 17.09.2021.)
Vancouver
Szurman I, Kocich R, Kursa M. Using of ultrasonic methods for determination of the elastic moduli on the Ti-Ni based alloys. Metalurgija [Internet]. 2014 [pristupljeno 17.09.2021.];53(3):357-360. Dostupno na: https://hrcak.srce.hr/119551
IEEE
I. Szurman, R. Kocich i M. Kursa, "Using of ultrasonic methods for determination of the elastic moduli on the Ti-Ni based alloys", Metalurgija, vol.53, br. 3, str. 357-360, 2014. [Online]. Dostupno na: https://hrcak.srce.hr/119551. [Citirano: 17.09.2021.]

Sažetak
The presented work is focused on the determination of elastic constants of selected alloys of the systems Ni-Ti and Ni-Ti-Cu with use of ultrasonic methods. Sample preparation was carried out using VIM in graphite crucible in combination with pouring into graphite mould. The prepared samples were appropriately heattreated, polished into the desired shape and subjected to measurement of density and then to ultrasonic measurements. In addition to conventional methods, such as mechanical tests, also less known methods are applied. Among the specific methods we can mention dynamic mechanical analysis, dynamic super microhardness measurement, electro acoustic resonance or ultrasonic test.The group of thus tested materials includes also Ti alloys.

Ključne riječi
Ti-Ni alloys; elastic moduli; ultrasonic methods; alloys; inhomogeneities

Hrčak ID: 119551

URI
https://hrcak.srce.hr/119551

Posjeta: 498 *