Prethodno priopćenje

Fruit flow calculation on the rotating sizing machines

Dragan Markovic ; University of Belgrade, Faculty of Mechanical Engneering, Kraljice Marije 16, 11120 Belgrade 35, Serbia
Nikola Mladenovic ; University of Belgrade, Faculty of Mechanical Engneering, Kraljice Marije 16, 11120 Belgrade 35, Serbia
Vojislav Simonovic ; University of Belgrade, Faculty of Mechanical Engneering, Kraljice Marije 16, 11120 Belgrade 35, Serbia
Ivana Markovic orcid.org/0000-0001-7200-763X ; University of Belgrade, Faculty of Mechanical Engneering, Kraljice Marije 16, 11120 Belgrade 35, Serbia
Snezana Stevanovic-Masovic ; University of Belgrade, Faculty of Agriculture, Nemanjina 6, 11080 Belgrade 35, Serbia

Sažetak

This paper analyzes theoretically the motion and flow of eight fruit types, along rotating sizing machines. It starts from differential equation of fruit motion on a rotating disk of the sizing machine. A universal method that can generally be applied to determine the flow of all types of rotary sizing machine is developed. Flow analysis comprised sized fruit mass and flow. New empirical coefficients were introduced: extent ratio, feed ratio and distribution ratio. In particular, the influence of the relative speed of fruit on the capacity of sizing machines is researched. The results obtained for the adopted values extend, feed and distribution ratio ke = 0,7; kf = 1; kd = 0,5 coincide approximately with those reported to date for fruit flow rate on sizing machines. It was found that flow rates vary considerably, depending on fruit diameter and mass. Fruit numbers flow ranges from 8949 crops/h for apple to 40.157 crops/h for deep frozen raspberry. Mass flow varies from 229,1 kg/h for cherry to 2054,7 kg/h for apple.

Ključne riječi

flow; fruit motion; fruit sizing

Hrčak ID:

123351

URI

https://hrcak.srce.hr/123351

Datum izdavanja:

24.6.2014.

Podaci na drugim jezicima: hrvatski

Posjeta: 1.877 *