Skoči na glavni sadržaj

Prethodno priopćenje

The influence of drawing speed on structure changes in high carbon steel wires

M. Suliga ; Czestochowa University of Technology, Czestochowa, Poland
R. Kruzel ; Czestochowa University of Technology, Czestochowa, Poland
T. Garstka ; Czestochowa University of Technology, Czestochowa, Poland
J. Gazdowicz ; Institute of Ferrous Metallurgy Gliwice, Poland


Puni tekst: engleski pdf 421 Kb

str. 161-164

preuzimanja: 910

citiraj


Sažetak

In the paper the influence of the drawing speed on structure changes has been assessed. The Scanning Electron Microscope investigation confirmed that for wires drawn with high total draft, exceeding 80 %, makes it impossible to clearly assess the impact of drawing technology on structural changes in the drawn wires. Thus, to assess the structural changes necessary to apply quantitative methods. On the basis of examination of the wire structure by measuring of electrical resistance, the structure changes in drawn wires has been determined. It has been shown that the increase of drawing speed, especially above 15 m/s, causes an increase in structure defect, with a decline in platelet orientation of cementite in drawn wires.

Ključne riječi

wire; high carbon steel; drawing speed; structure; wire resistance

Hrčak ID:

126721

URI

https://hrcak.srce.hr/126721

Datum izdavanja:

1.1.2015.

Posjeta: 1.411 *