Skoči na glavni sadržaj

Izvorni znanstveni članak

Simulation and application of loose tooling forging for heavy grinding roller shaft forgings

Juan-hua Su
Feng-zhang Ren
Shu-guo Jia
Shi-zhong Wei


Puni tekst: engleski PDF 629 Kb

str. 33-37

preuzimanja: 397

citiraj


Sažetak

The grinding roller shaft is a key part of the grinding roller. It has a step-shaped shaft with different round cross-sections and 1850 mm × 1110 mm rectangular cross-section. If the general method of free forging is used, the upsetting diameter of ingot will reach 2900 mm, and 8400 t hydraulic press current will not be produced so that the loose tooling forging process is to be used. The loose tooling forging process of rectangular flange has been researched by using DEFORM-3D simulation software and establishing a reasonable forging process. The production results reveal that the heavy forgings used as grinding roller shafts can be successfully produced with the present 8400 t capacity hydraulic presses. The eligible forgings have proved the rationality of the technical process.

Ključne riječi

grinding roller shaft; loose tooling forgin; numerical simulation; rectangular cross-section; heavy forgings

Hrčak ID:

133247

URI

https://hrcak.srce.hr/133247

Datum izdavanja:

21.1.2015.

Posjeta: 843 *