Skoči na glavni sadržaj

Pregledni rad

https://doi.org/10.5772/59315

Integration of Emission-wavelength-controlled InAs Quantum Dots for Ultrabroadband Near-infrared Light Source

Nobuhiko Ozaki ; Wakayama University, Wakayama, Japan
Koichi Takeuchi ; Wakayama University, Wakayama, Japan
Yuji Hino ; Wakayama University, Wakayama, Japan
Yohei Nakatani ; Wakayama University, Wakayama, Japan
Takuma Yasuda ; Wakayama University, Wakayama, Japan
Shunsuke Ohkouchi ; NEC Corporation, Tsukuba, Japan
Eiichiro Watanabe ; National Institute for Materials Science, Tsukuba, Japan
Hirotaka Ohsato ; National Institute for Materials Science, Tsukuba, Japan
Naoki Ikeda ; National Institute for Materials Science, Tsukuba, Japan
Yoshimasa Sugimoto ; National Institute for Materials Science, Tsukuba, Japan
Edmund Clarke ; University of Sheffield, Sheffield, UK
Richard A. Hogg ; University of Sheffield, Sheffield, UK


Puni tekst: engleski pdf 5.353 Kb

str. 4-26

preuzimanja: 757

citiraj


Sažetak

Near-infrared (NIR) light sources are widely utilized in biological and medical imaging systems owing to their long penetration depth in living tissues. In a recently developed biomedical non-invasive cross-sectional imaging system, called optical coherence tomography (OCT), a broadband spectrum is also required, because OCT is based on low coherence interferometry. To meet these operational requirements, we have developed a NIR broadband light source by integrating self-assembled InAs quantum dots (QDs) grown on a GaAs substrate (InAs/GaAs QDs) with different emission wavelengths. In this review, we introduce the developed light sources and QD growth techniques that are used to control the emission wavelength for broadband emission spectra with center wavelengths of 1.05 and 1.3 μm. Although the strain-induced Stranski-Krastanov (S-K) mode-grown InAs/GaAs QDs normally emit light at a wavelength of around 1.2 μm, the central emission wavelength can be controlled to be between 0.9–1.4 μm by the use of an In-flush technique, the insertion of a strain-reducing layer (SRL) and bi-layer QD growth techniques. These techniques are useful for applying InAs/GaAs QDs as NIR broadband light sources and are especially suitable for our proposed spectral-shape-controllable broadband NIR light source. The potential of this light source for improving the performance of OCT systems is discussed.

Ključne riječi

quantum dot; molecular beam epitaxy (MBE); selective area growth; in-flush; bi-layer quantum dot; optical coherence tomography (OCT); near-infrared broadband light source

Hrčak ID:

142638

URI

https://hrcak.srce.hr/142638

Datum izdavanja:

1.1.2014.

Posjeta: 1.401 *