Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.5772/56626

A Facile One Step Solution Route to Synthesize Cuprous Oxide Nanofluid

Shenoy U. Sandhya ; Department of Chemisty, National Institute of Technology Karnataka, Surathkal, India
Shetty A. Nityananda ; Department of Chemisty, National Institute of Technology Karnataka, Surathkal, India


Puni tekst: engleski pdf 2.455 Kb

str. 3-5

preuzimanja: 730

citiraj


Sažetak

A cuprous oxide nanofluid stabilized by sodium lauryl sulfate, synthesized by using the one step method, has been reported. Nanofluids were synthesized by using a well‐controlled surfactant‐assisted solution phase synthesis. The method involved reduction of copper acetate by glucose in a mixture of water and ethylene glycol serving as the base fluid. The synthesized fluid was characterized by X‐ray and electron diffraction techniques, in addition, transmission and field emission microscopic techniques and Fourier transform infra red spectroscopic analysis was undertaken. The rheological property, as well as the thermal conductivity of the fluid, were measured. The variation of reaction parameters considerably affected the size of the particles as well as the reaction rate. The uniform dispersion of the particles in the base fluid led to a stability period of three months under stationary state, augmenting the thermal conductivity of the nanofluid. The method is found to be simple, reliable and fast for the synthesis of Newtonian nanofluids containing cuprous oxide nanoparticles.

Ključne riječi

cuprous oxide; nanofluids; nanoparticles; thermal conductivity; viscosity

Hrčak ID:

142649

URI

https://hrcak.srce.hr/142649

Datum izdavanja:

1.1.2013.

Posjeta: 1.115 *