Skoči na glavni sadržaj

Izvorni znanstveni članak

https://doi.org/10.17559/TV-20140708125658

Shear resistance of reinforced concrete beams in dependence on concrete strength in compressive struts

Davor Grandić orcid id orcid.org/0000-0002-0424-2096 ; Faculty of Civil Engineering, University of Rijeka, Radmile Matejčić 3, 51000 Rijeka, Croatia
Paulo Šćulac ; Faculty of Civil Engineering, University of Rijeka, Radmile Matejčić 3, 51000 Rijeka, Croatia
Ivana Štimac Grandić orcid id orcid.org/0000-0003-3643-7848 ; Faculty of Civil Engineering, University of Rijeka, Radmile Matejčić 3, 51000 Rijeka, Croatia


Puni tekst: hrvatski pdf 1.702 Kb

str. 925-934

preuzimanja: 5.879

citiraj

Puni tekst: engleski pdf 1.702 Kb

str. 925-934

preuzimanja: 1.516

citiraj


Sažetak

In the current European Code EN 1992-1-1 a truss model with variable inclination angle of concrete compressive struts with a quite wide range of inclination angle, from 21,8° to 45°, is intended for use for shear design of reinforced concrete beams. However, some researches and recommendations indicate special attention when choosing the lower bound of inclination angle of the concrete compressive struts, due to the reduced compressive strength of cracked concrete. This work reviews theoretical background and shear design methods of reinforced concrete beams. Relation of the shear resistance to crushing of the compressive struts as a function of their inclination angle has been investigated through a parametric study, where three different approaches have been used in order to limit stresses in the compressive struts. Based on the comparison of results from the analysis a recommendation for shear resistance calculation of reinforced concrete beams in dependence on concrete strength in compressive struts of the truss model is given.

Ključne riječi

compressive struts inclination angle; shear; truss model

Hrčak ID:

143135

URI

https://hrcak.srce.hr/143135

Datum izdavanja:

8.8.2015.

Podaci na drugim jezicima: hrvatski

Posjeta: 8.470 *