hrcak mascot   Srce   HID

Original scientific paper

Physical modelling and numerical finite element method (FEM) simulation of forging in open die of alloy AIMgSi0,5

M. Janjić ; Faculty of Mechanical Engineering, University of Montenegro, Montenegro
M. Vukčević ; Faculty of Mechanical Engineering, University of Montenegro, Montenegro
Z. Jurković ; Faculty of Engineering, University of Rijeka, Croatia
N. Šibalić ; Faculty of Mechanical Engineering, University of Montenegro, Montenegro
S. Savićević ; Faculty of Mechanical Engineering, University of Montenegro, Montenegro

Fulltext: english, pdf (296 KB) pages 181-184 downloads: 520* cite
APA 6th Edition
Janjić, M., Vukčević, M., Jurković, Z., Šibalić, N. & Savićević, S. (2016). Physical modelling and numerical finite element method (FEM) simulation of forging in open die of alloy AIMgSi0,5. Metalurgija, 55 (2), 181-184. Retrieved from https://hrcak.srce.hr/146491
MLA 8th Edition
Janjić, M., et al. "Physical modelling and numerical finite element method (FEM) simulation of forging in open die of alloy AIMgSi0,5." Metalurgija, vol. 55, no. 2, 2016, pp. 181-184. https://hrcak.srce.hr/146491. Accessed 26 Nov. 2020.
Chicago 17th Edition
Janjić, M., M. Vukčević, Z. Jurković, N. Šibalić and S. Savićević. "Physical modelling and numerical finite element method (FEM) simulation of forging in open die of alloy AIMgSi0,5." Metalurgija 55, no. 2 (2016): 181-184. https://hrcak.srce.hr/146491
Harvard
Janjić, M., et al. (2016). 'Physical modelling and numerical finite element method (FEM) simulation of forging in open die of alloy AIMgSi0,5', Metalurgija, 55(2), pp. 181-184. Available at: https://hrcak.srce.hr/146491 (Accessed 26 November 2020)
Vancouver
Janjić M, Vukčević M, Jurković Z, Šibalić N, Savićević S. Physical modelling and numerical finite element method (FEM) simulation of forging in open die of alloy AIMgSi0,5. Metalurgija [Internet]. 2016 [cited 2020 November 26];55(2):181-184. Available from: https://hrcak.srce.hr/146491
IEEE
M. Janjić, M. Vukčević, Z. Jurković, N. Šibalić and S. Savićević, "Physical modelling and numerical finite element method (FEM) simulation of forging in open die of alloy AIMgSi0,5", Metalurgija, vol.55, no. 2, pp. 181-184, 2016. [Online]. Available: https://hrcak.srce.hr/146491. [Accessed: 26 November 2020]

Abstracts
This paper researches the process of forging in open die of gradual axial-symmetric workpiece made of alloy AIMg-Si0,5. The physical modelling was carried out, for which an original method for physical discretisation and numerical FEM analysis was developed. The components of tensor were determined: strain, strain rate, stress and the corresponding effective parameters. The results obtained experimentally and through a numerical FEM simulation were compared and analysed.

Keywords
forging; Al alloy; strain rate; stress; modelling; numerical simulation

Hrčak ID: 146491

URI
https://hrcak.srce.hr/146491

Visits: 779 *