Tehnički vjesnik, Vol. 23 No. 1, 2016.
Izvorni znanstveni članak
https://doi.org/10.17559/TV-20150202152541
Bending accuracy of the HC260Y steel in different V-tool configurations
Josip Cumin
; Mechanical Engineering Faculty in Slavonski Brod, Trg I. B. Mazuranic 2, 35000 Slavonski Brod, Croatia
Antun Stoić
; Mechanical Engineering Faculty in Slavonski Brod, Trg I. B. Mazuranic 2, 35000 Slavonski Brod, Croatia
Miroslav Duspara
orcid.org/0000-0003-4249-9279
; Mechanical Engineering Faculty in Slavonski Brod, Trg I. B. Mazuranic 2, 35000 Slavonski Brod, Croatia
Sažetak
The automobile chassis is produced from various metal formed parts that are welded together. Trends in the automobile industry show that most of the car manufacturers tend to use high strength, lightweight materials. The main reasons for this are minimization of the used material and better fuel economy of the produced cars. Such lightweight materials often have high strength which causes large amounts of elastic unloading (springback) after sheet metal forming operations. Mostly used sheet metal forming process is the bending process, where the elastic springback can be severe thus diminishing the desired accuracy of the part. In this paper, the comparison between mathematical models, FEM method and experiments is shown, and the effects of V-tool bending process parameters can be seen on the resulting sheet angle of the HC260Y steel.
Ključne riječi
Hrčak ID:
153176
URI
Datum izdavanja:
19.2.2016.
Posjeta: 2.172 *