Skoči na glavni sadržaj

Izvorni znanstveni članak

Experimental and numerical analysis of a knee endoprosthesis numerical model

L. Zach ; Czech Technical University in Prague, Faculty of Mechanical Engineering, Prague, Czech Republic
L. Kunčická ; VŠB-Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Ostrava-Poruba, Czech Republic
P. Růžička ; Czech Technical University in Prague, Faculty of Mechanical Engineering, Prague, Czech Republic
B. Baghirova ; VŠB-Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Ostrava-Poruba, Czech Republic


Puni tekst: engleski pdf 183 Kb

str. 349-352

preuzimanja: 617

citiraj


Sažetak

The aim of this study is to create and verify a numerical model for a Medin Modular orthopedic knee-joint implant by investigating contact pressure, its distribution and contact surfaces. An experiment using Fuji Prescale pressure sensitive films and a finite element analysis (FEA) using Abaqus software were carried out. The experimental data were evaluated using a special designed program and were compared with the results of the analysis. The designed evaluation program had been constructed on the basis of results obtained from a supplementary calibration experiment. The applicability of the numerical model for the real endoprosthesis behavior prediction was proven on the basis of their good correlation.

Ključne riječi

endoprosthesis; knee joint; numerical; analysis; FEM

Hrčak ID:

153617

URI

https://hrcak.srce.hr/153617

Datum izdavanja:

1.7.2016.

Posjeta: 1.054 *