hrcak mascot   Srce   HID

Metalurgija, Vol. 55 No. 3, 2016.

Izvorni znanstveni članak

Plastometric study of hot formability of hypereutectoid C – Mn – Cr – V steel

P. Kawulok ; VSB – Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic
I. Schindler ; VSB – Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic
R. Kawulok ; VSB – Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic
S. Rusz ; VSB – Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic
P. Opěla ; VSB – Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic
J. Kliber ; VSB – Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic
M. Kawuloková ; VSB – Technical University of Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic
Z. Solowski ; Třinecké železárny a.s., Czech Republic
K. M. Čmiel ; Třinecké železárny a.s., Czech Republic

Puni tekst: engleski, pdf (194 KB) str. 365-368 preuzimanja: 216* citiraj
APA 6th Edition
Kawulok, P., Schindler, I., Kawulok, R., Rusz, S., Opěla, P., Kliber, J., ... Čmiel, K.M. (2016). Plastometric study of hot formability of hypereutectoid C – Mn – Cr – V steel. Metalurgija, 55 (3), 365-368. Preuzeto s https://hrcak.srce.hr/153621
MLA 8th Edition
Kawulok, P., et al. "Plastometric study of hot formability of hypereutectoid C – Mn – Cr – V steel." Metalurgija, vol. 55, br. 3, 2016, str. 365-368. https://hrcak.srce.hr/153621. Citirano 23.02.2019.
Chicago 17th Edition
Kawulok, P., I. Schindler, R. Kawulok, S. Rusz, P. Opěla, J. Kliber, M. Kawuloková, Z. Solowski i K. M. Čmiel. "Plastometric study of hot formability of hypereutectoid C – Mn – Cr – V steel." Metalurgija 55, br. 3 (2016): 365-368. https://hrcak.srce.hr/153621
Harvard
Kawulok, P., et al. (2016). 'Plastometric study of hot formability of hypereutectoid C – Mn – Cr – V steel', Metalurgija, 55(3), str. 365-368. Preuzeto s: https://hrcak.srce.hr/153621 (Datum pristupa: 23.02.2019.)
Vancouver
Kawulok P, Schindler I, Kawulok R, Rusz S, Opěla P, Kliber J i sur. Plastometric study of hot formability of hypereutectoid C – Mn – Cr – V steel. Metalurgija [Internet]. 2016 [pristupljeno 23.02.2019.];55(3):365-368. Dostupno na: https://hrcak.srce.hr/153621
IEEE
P. Kawulok, et al., "Plastometric study of hot formability of hypereutectoid C – Mn – Cr – V steel", Metalurgija, vol.55, br. 3, str. 365-368, 2016. [Online]. Dostupno na: https://hrcak.srce.hr/153621. [Citirano: 23.02.2019.]

Sažetak
Formability of hypereutectoid C-Mn-Cr-V steel in hot condition was investigated with use of plastometric methods. A wide range of deformation temperatures 1 300 - 640 °C for hot tensile tests was proposed with use of nil-strength temperature (NST), determined by special plastometric method, and as well as with use of the calculated temperatures of phase transformations during heating of the investigated steel. Ultimate tensile strength of the investigated steel was increasing exponentially with the decreasing deformation temperature. Ductility of the investigated steel in hot condition increased with the increasing deformation temperature up to the temperatures ranging from 1 150 to 1 250 °C, after which a sharp decline of formability took place in investigated material.

Ključne riječi
hypereutectoid steel; deformation; hot formability; mechanical properties in hot condition

Hrčak ID: 153621

URI
https://hrcak.srce.hr/153621

Posjeta: 298 *