Izvorni znanstveni članak

https://doi.org/10.17559/TV-20131104141055

Inhomogeneous plastic deformation and fracture of double reduced thin plates

Emil Spišák ; Technical University of Košice, Department of Technology and Materials, Mäsiarská 74, 040 01 Košice, Slovak Republic
Janka Majerníková orcid.org/0000-0002-2742-8723 ; Technical University of Košice, Department of Technology and Materials, Mäsiarská 74, 040 01 Košice, Slovak Republic
Dávid Bogdan ; Technical University of Košice, Department of Technology and Materials, Mäsiarská 74, 040 01 Košice, Slovak Republic
Tomáš Sleziak ; Technical University of Košice, Department of Technology and Materials, Mäsiarská 74, 040 01 Košice, Slovak Republic
Marek Čižmár ; U. S. Steel Košices r.o., Vstupný areal U. S. Steel, 044 54 Košice, Slovak Republic

Sažetak

This paper discusses causes and consequences of plastic deformation of packaging sheets which are nowadays used in a wide range of applications. The article deals with a specific inhomogeneity and localization of plastic deformation which is analysed in detail. For material testing, uniaxial and biaxial tensile test was used and the results were also compared and evaluated. In the last part of this paper microstructure of material was analysed by localized deformations.

Ključne riječi

double reduction; plastic deformation; tensile tests; thin plates

Hrčak ID:

156818

URI

https://hrcak.srce.hr/156818

Datum izdavanja:

27.4.2016.

Podaci na drugim jezicima: hrvatski

Posjeta: 1.829 *