hrcak mascot   Srce   HID

Tehnički vjesnik, Vol. 23 No. 2, 2016.

Izvorni znanstveni članak
https://doi.org/10.17559/TV-20131108115506

Cutting forces and power during elastic abrasive cutting of rotating workpieces

Irina Aleksandrova ; Technical University of Gabrovo, Department of Mechanical Engineering Equipment and Technologies, 4 H. Dimirar St, Gabrovo 5300, Republic of Bulgaria
Gancho Ganev ; Ideal Standard – Vidima, 53 M. Popov St, Sevlievo 5400, Republic of Bulgaria
Hristo Hristov ; Technical University of Gabrovo, Department of Mechanical Engineering Equipment and Technologies, 4 H. Dimirar St, Gabrovo 5300, Republic of Bulgaria

Puni tekst: engleski, pdf (1 MB) str. 343-348 preuzimanja: 297* citiraj
APA 6th Edition
Aleksandrova, I., Ganev, G. i Hristov, H. (2016). Cutting forces and power during elastic abrasive cutting of rotating workpieces. Tehnički vjesnik, 23 (2), 343-348. https://doi.org/10.17559/TV-20131108115506
MLA 8th Edition
Aleksandrova, Irina, et al. "Cutting forces and power during elastic abrasive cutting of rotating workpieces." Tehnički vjesnik, vol. 23, br. 2, 2016, str. 343-348. https://doi.org/10.17559/TV-20131108115506. Citirano 27.02.2021.
Chicago 17th Edition
Aleksandrova, Irina, Gancho Ganev i Hristo Hristov. "Cutting forces and power during elastic abrasive cutting of rotating workpieces." Tehnički vjesnik 23, br. 2 (2016): 343-348. https://doi.org/10.17559/TV-20131108115506
Harvard
Aleksandrova, I., Ganev, G., i Hristov, H. (2016). 'Cutting forces and power during elastic abrasive cutting of rotating workpieces', Tehnički vjesnik, 23(2), str. 343-348. https://doi.org/10.17559/TV-20131108115506
Vancouver
Aleksandrova I, Ganev G, Hristov H. Cutting forces and power during elastic abrasive cutting of rotating workpieces. Tehnički vjesnik [Internet]. 2016 [pristupljeno 27.02.2021.];23(2):343-348. https://doi.org/10.17559/TV-20131108115506
IEEE
I. Aleksandrova, G. Ganev i H. Hristov, "Cutting forces and power during elastic abrasive cutting of rotating workpieces", Tehnički vjesnik, vol.23, br. 2, str. 343-348, 2016. [Online]. https://doi.org/10.17559/TV-20131108115506
Puni tekst: hrvatski, pdf (1 MB) str. 343-348 preuzimanja: 270* citiraj
APA 6th Edition
Aleksandrova, I., Ganev, G. i Hristov, H. (2016). Sile i snaga rezanja tijekom elastičnog abrazivnog rezanja rotirajućih obradaka. Tehnički vjesnik, 23 (2), 343-348. https://doi.org/10.17559/TV-20131108115506
MLA 8th Edition
Aleksandrova, Irina, et al. "Sile i snaga rezanja tijekom elastičnog abrazivnog rezanja rotirajućih obradaka." Tehnički vjesnik, vol. 23, br. 2, 2016, str. 343-348. https://doi.org/10.17559/TV-20131108115506. Citirano 27.02.2021.
Chicago 17th Edition
Aleksandrova, Irina, Gancho Ganev i Hristo Hristov. "Sile i snaga rezanja tijekom elastičnog abrazivnog rezanja rotirajućih obradaka." Tehnički vjesnik 23, br. 2 (2016): 343-348. https://doi.org/10.17559/TV-20131108115506
Harvard
Aleksandrova, I., Ganev, G., i Hristov, H. (2016). 'Sile i snaga rezanja tijekom elastičnog abrazivnog rezanja rotirajućih obradaka', Tehnički vjesnik, 23(2), str. 343-348. https://doi.org/10.17559/TV-20131108115506
Vancouver
Aleksandrova I, Ganev G, Hristov H. Sile i snaga rezanja tijekom elastičnog abrazivnog rezanja rotirajućih obradaka. Tehnički vjesnik [Internet]. 2016 [pristupljeno 27.02.2021.];23(2):343-348. https://doi.org/10.17559/TV-20131108115506
IEEE
I. Aleksandrova, G. Ganev i H. Hristov, "Sile i snaga rezanja tijekom elastičnog abrazivnog rezanja rotirajućih obradaka", Tehnički vjesnik, vol.23, br. 2, str. 343-348, 2016. [Online]. https://doi.org/10.17559/TV-20131108115506

Sažetak
This paper presents the study and modelling of the complex impact of elastic abrasive cutting conditions: the force compressing the cut-off wheel to the workpiece, workpiece rotational frequency and cut-off wheel diameter on the forces and power of cutting when machining rotating steel workpieces. A generalized model for determining the specific cutting force has been created and on its basis empirical relationships for the tangential force and cutting power have been derived. The ratio between the tangential and normal forces has been analyzed as an evaluation parameter of the abrasive cutting process effectiveness.

Ključne riječi
cutting forces; cutting power; elastic abrasive cutting; specific cutting force

Hrčak ID: 156819

URI
https://hrcak.srce.hr/156819

[hrvatski]

Posjeta: 926 *