hrcak mascot   Srce   HID

Original scientific paper

The theoretical and experimental analysis of the possibility of employing the groove rolling process for the manufacture of Mg/Al bimetallic bars

S. Mróz ; Częstochowa University of Technology, Poland
P. Szota ; Częstochowa University of Technology, Poland
A. Stefanik ; Częstochowa University of Technology, Poland

Fulltext: english, pdf (166 KB) pages 628-630 downloads: 285* cite
APA 6th Edition
Mróz, S., Szota, P. & Stefanik, A. (2016). The theoretical and experimental analysis of the possibility of employing the groove rolling process for the manufacture of Mg/Al bimetallic bars. Metalurgija, 55 (4), 628-630. Retrieved from https://hrcak.srce.hr/157383
MLA 8th Edition
Mróz, S., et al. "The theoretical and experimental analysis of the possibility of employing the groove rolling process for the manufacture of Mg/Al bimetallic bars." Metalurgija, vol. 55, no. 4, 2016, pp. 628-630. https://hrcak.srce.hr/157383. Accessed 1 Apr. 2020.
Chicago 17th Edition
Mróz, S., P. Szota and A. Stefanik. "The theoretical and experimental analysis of the possibility of employing the groove rolling process for the manufacture of Mg/Al bimetallic bars." Metalurgija 55, no. 4 (2016): 628-630. https://hrcak.srce.hr/157383
Harvard
Mróz, S., Szota, P., and Stefanik, A. (2016). 'The theoretical and experimental analysis of the possibility of employing the groove rolling process for the manufacture of Mg/Al bimetallic bars', Metalurgija, 55(4), pp. 628-630. Available at: https://hrcak.srce.hr/157383 (Accessed 01 April 2020)
Vancouver
Mróz S, Szota P, Stefanik A. The theoretical and experimental analysis of the possibility of employing the groove rolling process for the manufacture of Mg/Al bimetallic bars. Metalurgija [Internet]. 2016 [cited 2020 April 01];55(4):628-630. Available from: https://hrcak.srce.hr/157383
IEEE
S. Mróz, P. Szota and A. Stefanik, "The theoretical and experimental analysis of the possibility of employing the groove rolling process for the manufacture of Mg/Al bimetallic bars", Metalurgija, vol.55, no. 4, pp. 628-630, 2016. [Online]. Available: https://hrcak.srce.hr/157383. [Accessed: 01 April 2020]

Abstracts
The paper presents the results of investigation into the possibility of employing the groove rolling process to produce round Mg/Al bimetallic bars. The feedstock were round 22,5 mm Mg/Al bars that had been produced using the explosive welding method. The average thickness of the aluminium layer amounted to 1,7 mm. The Mg/Al bars were rolled in the stretching rolling passes. The theoretical analysis was done using the Forge2011® computer program. Based on the theoretical and experimental analysis it has been found that one of the main rolling process parameters influencing the quality of bond between the bimetal components is the initial feedstock temperature.

Keywords
Mg/Al bimetallic bars; groove rolling; temperature; stress; numerical analysis

Hrčak ID: 157383

URI
https://hrcak.srce.hr/157383

Visits: 410 *