hrcak mascot   Srce   HID

Izvorni znanstveni članak

Comparison of deformation behavior of 316L stainless steel and Ti6Al4V alloy applied in traumatology

M. Losertová ; VŠB-Technical University Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic
M. Štamborská ; VŠB-Technical University Ostrava, Faculty of Metallurgy and Materials Engineering, Czech Republic
J. Lapin ; Institute of Materials & Machine Mechanics Slovak Academy of Sciences, Bratislava, Slovakia
V. Mareš ; VŠB-Technical University Ostrava, Center of Advanced Innovation Technologies, Czech Republic

Puni tekst: engleski, pdf (365 KB) str. 667-670 preuzimanja: 623* citiraj
APA 6th Edition
Losertová, M., Štamborská, M., Lapin, J. i Mareš, V. (2016). Comparison of deformation behavior of 316L stainless steel and Ti6Al4V alloy applied in traumatology. Metalurgija, 55 (4), 667-670. Preuzeto s https://hrcak.srce.hr/157393
MLA 8th Edition
Losertová, M., et al. "Comparison of deformation behavior of 316L stainless steel and Ti6Al4V alloy applied in traumatology." Metalurgija, vol. 55, br. 4, 2016, str. 667-670. https://hrcak.srce.hr/157393. Citirano 16.12.2019.
Chicago 17th Edition
Losertová, M., M. Štamborská, J. Lapin i V. Mareš. "Comparison of deformation behavior of 316L stainless steel and Ti6Al4V alloy applied in traumatology." Metalurgija 55, br. 4 (2016): 667-670. https://hrcak.srce.hr/157393
Harvard
Losertová, M., et al. (2016). 'Comparison of deformation behavior of 316L stainless steel and Ti6Al4V alloy applied in traumatology', Metalurgija, 55(4), str. 667-670. Preuzeto s: https://hrcak.srce.hr/157393 (Datum pristupa: 16.12.2019.)
Vancouver
Losertová M, Štamborská M, Lapin J, Mareš V. Comparison of deformation behavior of 316L stainless steel and Ti6Al4V alloy applied in traumatology. Metalurgija [Internet]. 2016 [pristupljeno 16.12.2019.];55(4):667-670. Dostupno na: https://hrcak.srce.hr/157393
IEEE
M. Losertová, M. Štamborská, J. Lapin i V. Mareš, "Comparison of deformation behavior of 316L stainless steel and Ti6Al4V alloy applied in traumatology", Metalurgija, vol.55, br. 4, str. 667-670, 2016. [Online]. Dostupno na: https://hrcak.srce.hr/157393. [Citirano: 16.12.2019.]

Sažetak
The comparative analysis of mechanical properties was performed for AISI 316L stainless steel and Ti6Al4V alloy using the digital image correlation (DIC) method. Both types of materials are commonly used for implants in traumatology. Tensile tests of the cylindrical tensile specimens were performed at room temperature and at an initial strain rate of 0,0025 s-1. The strain analysis during tensile tests was carried out by means of Vic 2D image correlation software. Ti6Al4V alloy showed higher yield strength and tensile strength. The differences in the strain localization zones were observed.

Ključne riječi
stainless steel AISI 316L; titanium alloy Ti6Al4V; mechanical properties; digital image correlation (DIC); strain fields

Hrčak ID: 157393

URI
https://hrcak.srce.hr/157393

Posjeta: 739 *