Prethodno priopćenje

Effect of cast steel production metallurgy on the emergence of casting defects

L. Čamek ; VŠBTechnical University of Ostrava, Faculty of Metallurgy and Material Engineering, Department of Metallurgy and Foundry, Czech Republic
P. Lichý ; VŠBTechnical University of Ostrava, Faculty of Metallurgy and Material Engineering, Department of Metallurgy and Foundry, Czech Republic
I. Kroupová ; VŠBTechnical University of Ostrava, Faculty of Metallurgy and Material Engineering, Department of Metallurgy and Foundry, Czech Republic
J. Duda ; Vítkovice Steel a.s., Ostrava, Czech Republic
J. Beňo ; Vítkovické slévárny s.r.o., Ostrava, Czech Republic
M. Korbáš ; Vítkovické slévárny s.r.o., Ostrava, Czech Republic
F. Radkovský ; VŠBTechnical University of Ostrava, Faculty of Metallurgy and Material Engineering, Department of Metallurgy and Foundry, Czech Republic
S. Bliznyukov ; VŠBTechnical University of Ostrava, Faculty of Metallurgy and Material Engineering, Department of Metallurgy and Foundry, Czech Republic

Sažetak

The paper documents metallurgical possibilities of high alloy cast steel production in open induction medium frequency furnaces and an electric arc furnace in a gravity die casting foundry. The observation was focused on the emergence of gas defects in steel castings. The content of gases achieved during the metallurgical processes was evaluated for every unit of the production equipment and the casting ladle before casting into disposable sand moulds. The sand mould area was considered to be constant. The aim was to evaluate the current metallurgical possibilities of affecting the content of gases in high alloy cast steel in the current technical conditions of the foundry.

Ključne riječi

metallurgy; high alloy steel; induction medium frequency furnace; electric arc furnace; defects

Hrčak ID:

157428

URI

https://hrcak.srce.hr/157428

Datum izdavanja:

1.10.2016.

Posjeta: 1.513 *