hrcak mascot   Srce   HID

Kratko priopćenje

Adsorption Characteristics of Different Adsorbents and Iron(III) Salt for Removing As(V) from Water

Josip Ćurko ; Faculty of Food Technology and Biotechnology, University of Zagreb, Zagreb, Croatia
Marin Matošić ; Faculty of Food Technology and Biotechnology, University of Zagreb, Zagreb, Croatia
Vlado Crnek ; Faculty of Food Technology and Biotechnology, University of Zagreb, Zagreb, Croatia
Višnja Stulić ; Faculty of Food Technology and Biotechnology, University of Zagreb, Zagreb, Croatia
Ivan Mijatović ; Faculty of Food Technology and Biotechnology, University of Zagreb, Zagreb, Croatia

Puni tekst: engleski, pdf (318 KB) str. 250-255 preuzimanja: 248* citiraj
APA 6th Edition
Ćurko, J., Matošić, M., Crnek, V., Stulić, V. i Mijatović, I. (2016). Adsorption Characteristics of Different Adsorbents and Iron(III) Salt for Removing As(V) from Water. Food Technology and Biotechnology, 54 (2), 250-255.
MLA 8th Edition
Ćurko, Josip, et al. "Adsorption Characteristics of Different Adsorbents and Iron(III) Salt for Removing As(V) from Water." Food Technology and Biotechnology, vol. 54, br. 2, 2016, str. 250-255. Citirano 25.10.2020.
Chicago 17th Edition
Ćurko, Josip, Marin Matošić, Vlado Crnek, Višnja Stulić i Ivan Mijatović. "Adsorption Characteristics of Different Adsorbents and Iron(III) Salt for Removing As(V) from Water." Food Technology and Biotechnology 54, br. 2 (2016): 250-255.
Ćurko, J., et al. (2016). 'Adsorption Characteristics of Different Adsorbents and Iron(III) Salt for Removing As(V) from Water', Food Technology and Biotechnology, 54(2), str. 250-255.
Ćurko J, Matošić M, Crnek V, Stulić V, Mijatović I. Adsorption Characteristics of Different Adsorbents and Iron(III) Salt for Removing As(V) from Water. Food Technology and Biotechnology [Internet]. 2016 [pristupljeno 25.10.2020.];54(2):250-255.
J. Ćurko, M. Matošić, V. Crnek, V. Stulić i I. Mijatović, "Adsorption Characteristics of Different Adsorbents and Iron(III) Salt for Removing As(V) from Water", Food Technology and Biotechnology, vol.54, br. 2, str. 250-255, 2016. [Online].

Rad u XML formatu

The aim of this study is to determine the adsorption performance of three types of adsorbents for removal of As(V) from water: Bayoxide® E33 (granular iron(III) oxide), Titansorb® (granular titanium oxide) and a suspension of precipitated iron(III) hydroxide. Results of As(V) adsorption stoichiometry of two commercial adsorbents and precipitated iron(III) hydroxide in tap and demineralized water were fitted to Freundlich and Langmuir adsorption isotherm equations, from which adsorption constants and adsorption capacity were calculated. The separation factor RL for the three adsorbents ranged from 0.04 to 0.61, indicating effective adsorption. Precipitated iron(III) hydroxide had the greatest, while Titansorb had the lowest capacity to adsorb As(V). Comparison of adsorption from tap or demineralized water showed that Bayoxide and precipitated iron(III) hydroxide had higher adsorption capacity in demineralized water, whereas Titansorb showed a slightly higher capacity in tap water. These results provide mechanistic insights into how commonly used adsorbents remove As(V) from water.

Ključne riječi
arsenic removal; drinking water; adsorption

Hrčak ID: 160381


▼ Article Information


The prevalence of toxic arsenic in drinking water is a significant worldwide problem. Most developed countries have implemented strict regulations based on World Health Organization guidelines that allow no more than 10 µg/L of arsenic in drinking water (1). However, many developing countries do not have the infrastructure or water resources to implement or enforce such a policy, leading to a recommendation that they initially implement a maximum contaminant level of 50 µg/L of As to provide at least some protection against higher As concentrations (2). For all countries, affordable and efficient arsenic removal systems are crucial for creating and maintaining a safe drinking water supply.

Arsenic can be present in water in an oxidation state of –3, 0, +3 or +5, depending on the pH and redox potential of the water. It occurs in water most often as trivalent arsenite (H3AsO3, H2AsO3, HAsO32– and AsO33–) and pentavalent arsenate (H3AsO4, H2AsO4, HAsO42– and AsO43–). Arsenite, or As(III), is usually present as an uncharged molecule (H3AsO3) in the water with low redox potential and a pH between 6.5 and 9.2, while pentavalent arsenate, or As(V), is usually present as a negatively charged molecule (H2AsO4) in the water of the same pH range but with a more oxidized aerobic environment (3).

The oxidation state of arsenic determines whether it can be efficiently removed from drinking water by standard methods, which usually include a multistep process involving oxidation followed by adsorption or separation (4). For example, because arsenite can be uncharged, it is harder to remove it from water than negatively charged arsenate (5). Oxidation can be used to convert arsenic into an oxidation state favourable for removal, followed usually by either adsorption or separation. Separation usually involves filtering the contaminated water and separating arsenite and arsenate from the water by membrane-based processes such as reverse osmosis or nanofiltration (6).

Adsorption, an alternative method to separation, may involve various types of natural or synthetic adsorbents (4), including precipitated iron or aluminium hydroxides, ion exchangers, metal oxides such as iron, manganese and titanium, laterites, zeolites, activated charcoal and natural red earth (713). In cases when water is not heavily contaminated with arsenic and no oxidation or pH correction is necessary, commercially available granular iron(III) hydroxide and oxide are widely used because they have high adsorption capacity (11, 14) and can be disposed of safely. The adsorbent titanium dioxide (TiO2) actually plays a dual role of photocatalyst and adsorbent for arsenic removal. In the presence of artificial or natural UV light, TiO2 can photocatalyze the oxidation of As(III) to As(V), which then adsorbs onto the TiO2 surface. In the absence of UV radiation, TiO2 acts only as an adsorbent and shows adsorption capacity and adsorption kinetics superior to those of iron-based adsorption media. Pena at al. (15) showed granular TiO2 to have higher adsorption capacity than similarly sized granular iron(III) oxide.

One of the most common methods currently used to remove arsenic from drinking water is adsorption on precipitated hydroxides used for coagulation of colloidal particles with iron or aluminium salts. Coagulation is usually used in water treatment to remove turbidity and suspended solids, but hydroxides that form from coagulant salts can bind As(V) by either incorporating it into the hydroxide matrix or by adsorbing it electrostatically onto the positively charged hydroxide surface (16). This method in combination with sand filtration as a final step in the process sometimes does not remove arsenic to meet the maximum contaminant level of 10 µg/L in the treated water. This is primarily due to the inefficiency of sand filtration, which does not successfully remove particles smaller than 10 µm on which adsorbed As(V) can be located (17).

Researchers continue to search for more efficient methods to adsorb arsenic from water, which has led to a broad range of adsorbents (4). Though the efficiency of these adsorbents can vary depending on physical factors that influence the complex chemistry of arsenic in water, relatively few studies have compared the functional characteristics of several types of adsorbents (7, 11, 18, 19). In particular, little is known about the comparative functional characteristics of iron coagulant and adsorbents based on iron(III) oxide or titanium oxide.

To provide some of these data and thereby create a basis for improving arsenic adsorption methods, we investigated and compared the removal of As(V) from model solutions using commercial adsorptive media Bayoxide® E33 (granular iron(III) oxide), Titansorb® (granular titanium dioxide) and iron(III) chloride as a precipitated suspension of iron(III) hydroxide. Results of As(V) adsorption stoichiometry on the three used adsorbents in tap and demineralized water were fitted to Freundlich and Langmuir isotherm models to gain insights into the adsorption mechanism.

Material and Methods

Water samples

Three types of adsorbents were investigated for the removal of As(V) from tap and demineralized water spiked with As(V). The characteristics of the water used in this study are shown in Table 1. AsHNa2O4·7H2O (Fluka Chemie GmbH, Buchs, Switzerland) was used to prepare solutions of tap or demineralized water containing the following concentrations of As(V): 100, 200, 300, 400, 500 and 600 µg/L.

Table 1 Characteristics of tap and demineralized water
Demineralized water
γ(suspended matter)/(mg/L)00
Electrical conductivity/(µS/cm)680<0.1
Total hardness/(mg CaCO3/L)3750
Alkalinity/(mg CaCO3/L)3400


The following three types of adsorbents were studied: Bayoxide® E33, Titansorb® and precipitated suspension of iron(III) hydroxide. Bayoxide® E33 is granulated iron(III) oxide medium developed by LANXESS GmbH, Leverkusen, Germany. Manufacturer’s specifications are as follows: >70% content of Fe2O3, bulk density of 0.6 kg/L, grain size of 0.5–2.0 mm and specific surface area of at least 250 m2/g. Titansorb® is granulated titanium dioxide developed by Watch GmbH, Mannheim, Germany. Manufacturer’s specifications are as follows: grain size of 0.5–1.5 mm, bulk density of 0.6 kg/L and specific surface area of 350–450 m2/kg. Precipitated iron(III) hydroxide was prepared by adding FeCl3 (Sigma-Aldrich, Saint Louis, MO, USA) to model solutions to achieve desired concentrations of precipitated hydroxide, which were then expressed as Fe(III) in mg/L.

Adsorption tests

All adsorption experiments were conducted at a constant temperature of (20±1) °C and pH=8±0.1 in a Jar Tester ZR 4-6 (Zhongrun Water Co. High-Tech Industrial Park, Shenzhen, Guangdong, PR China) equipped with six 1.5-litre square acrylic beakers, each with its own mixing paddle centrally controlled. Model solutions for adsorption experiments were prepared in volumes of 1 L. At the beginning of each experiment, pH was corrected by the addition of 1 mol/L of hydrochloric acid (Sigma-Aldrich) and 1 mol/L of sodium hydroxide (Sigma-Aldrich) to achieve desired pH after the addition of adsorbents.

For testing arsenic adsorption using a precipitated suspension of iron(III) hydroxide, different amounts of FeCl3 were added to 1 L of model solutions of tap or demineralized water containing 100 µg/L of As(V) to give final Fe(III) concentrations of 0.68, 1.37, 2.06, 2.75, 3.44 and 4.12 mg/L. Then, a corresponding volume of FeCl3 stock solution was added to achieve 3.44 mg of Fe(III) in the model solutions containing As(V) concentrations of 100, 200, 300, 400, 500 or 600 µg/L. The iron(III) hydroxide suspension was mixed with paddles rotating at 200 rpm for 1 min and then at 20 rpm for 24 h.

For testing arsenic adsorption by Bayoxide E33 and Titansorb, these adsorbents (0.25 g) were added to 1 L of model solutions of tap or demineralized water containing As(V) concentrations of 100, 200, 300, 400, 500 or 600 µg/L. Solutions were mixed with paddles rotating at 150 rpm for 24 h.

After adsorption experiments, model solutions were filtered through a 0.45-µm filter (Whatman, GE Healthcare, Dassel, Germany), and 10 mL of concentrated HNO3 (Fluka Chemie GmbH) were added to 1 L of each sample in order to preserve them until later analysis by inductively coupled plasma optical emission spectrometry (ICP-OES).

Adsorption column tests

Bayoxide E33 and Titansorb were examined in column tests. Bayoxide E33 (V=95 mL), bulk density of 0.6 kg/L and grain size of 0.5–2.0 mm or Titansorb (V=95 mL), bulk density of 0.6 kg/L and grain size of 0.5–1.5 mm were placed in a glass cylinder with an 11-mm diameter, and tap water spiked with 100 µg of As(V) per L was pumped through the column at 5 m/h using a peristaltic pump (ProMinent, Heidelberg, Germany), where empty bed contact time (EBCT) was 12 min. From the mass of the used adsorbent and from the volume of spiked water that passed through the column, adsorption capacity of adsorbent (q) was calculated. Spiked water was run through the column until the concentration of As(V) in effluent exceeded γ=50 µg/L. Each day, a 100-mL sample of effluent was taken and preserved by adding 1 mL of concentrated HNO3 for later analysis by ICP-OES.

Calculation of Freundlich and Langmuir constants

Freundlich and Langmuir constants were calculated using MS Excel (Microsoft, Redmond, WA, USA) from the initial mass concentrations of As(V) (γ0/(mg/L)), measured equilibrium As(V) concentration (γe/(mg/L)) and calculated mass of adsorbate on the adsorbent at equilibrium for Freundlich (qeF/(mg/g)) and for Langmuir (qeL/(mg/g)) isotherms (20).

Freundlich constants were calculated from the linear region of a log-log diagram (Eq. 1), and then plotted as log qeF vs. log γe. This plot was used to calculate the Freundlich isotherm constant (KF/(mg/g)·(L/g)n), adsorption intensity (n) and coefficient of determination (R2).


The linear Langmuir equation (Eq. 2) was plotted as 1/qeL vs. 1e. The slope (1/Q0) and y-intercept (1/(KL·Q0)) were used to calculate the Langmuir isotherm constant (KL/(L/mg)), maximum monolayer coverage capacity (Q0/(mg/g)) and coefficient of determination (R2). To determine linearity, favourability or unfavourability of Langmuir isotherms, the dimensionless constant separation factor, commonly used as separation factor (RL), was calculated according to Eq. 3 (20, 21).


ICP-OES and other analyses

As(V) concentration in tap and demineralized water was measured using inductively coupled plasma optical emission spectrometer (Iris Intrepid II XSP; Thermo Electron, Thermo Fischer Scientific Inc., Waltham, MA, USA). Other analyses used to determine pH, temperature, suspended matter, electrical conductivity, total hardness, alkalinity, iron, manganese, chlorides and sulphates in all samples were performed according to standard methods (22).

Results and Discussion

Adsorption experiments

The removal of As(V) from spiked tap and demineralized water by precipitated iron(III) hydroxide, Bayoxide E33 and Titansorb was compared. FeCl3 served as the source of iron(III) hydroxide, since it hydrolyzes when added to water and later precipitates as insoluble hydroxide. Based on the criteria of Cornell and Schwertmann (23), it was assumed that all FeCl3 added to the model solutions hydrolyzed and precipitated as iron(III) hydroxide because the pH was above 2. Since the other two adsorbents were granular, they were added directly to the spiked solutions.

Freundlich constants in tap water were 5.85 for iron(III) hydroxide, 0.13 for Bayoxide E33 and 0.07 (mg/g)·(L/g)n for Titansorb (Table 2), suggesting that iron(III) hydroxide had the highest adsorption capacity. The value of 1/n of all three adsorbents did not differ significantly, which suggested that they all had similar adsorption intensity (Fig. 1). This is consistent with the adsorption mechanism of Edwards (16), who proposed a three-step process in which arsenate precipitation is followed by its incorporation into the growing floccules of precipitated hydroxide, and finally by bonding between negatively charged arsenate and positively charged hydroxide. Titansorb showed the highest adsorption intensity (1/n) of 0.4731 (Table 2), indicating the formation of a stable complex between the adsorbent and As(V).

Table 2 Freundlich and Langmuir isotherm constants for As(V) removal from tap and demineralized water by three adsorbents
AdsorbentFreundlich isotherm constantsLangmuir isotherm constants
Tap waterIron(III) hydroxide5.850.788020.800.9571376.210.40.4918.600.9685
Bayoxide E330.130.75350.420.95108.09.50.510.360.9954
Iron(III) hydroxide10.300.545424.700.9012181.923.90.2924.300.9766
Bayoxide E330.470.36390.850.92771.9229.

*Calculated amount of adsorbate in the adsorbent at an equilibrium concentration of γe=5 µg/L

Fig. 1 Dependence of As(V) adsorbed at equilibrium (qeF) on As(V) concentration in a solution, used to calculate Freundlich isotherm constants

According to the calculated constants for Freundlich isotherms, iron(III) hydroxide and Bayoxide E33 achieved better results in demineralized compared to tap water (Table 2). Iron(III) hydroxide had a KF of 10.30 (mg/g)· (L/g)n, which was 1.7-fold higher than the value in tap water. Nevertheless, when we used the calculated Freundlich constants and a γe(As(V))=5 µg/L in Eq. 1, we found qeF to be 20.80 and 24.70 mg of As(V) per g of Fe(III) in tap and demineralized water, respectively. This suggests a similar amount of adsorbed As(V) in the two types of water. Mitrakas et al. (24) developed a mathematical model for prediction of Fe(III) dose for removal of As(V) at different pH values. Calculated qeF at pH=8 was 15.7, and at pH=7.5 the qeF was 24.7 mg of As(V) per g of Fe(III), which was in accordance with our results.

Similar to the precipitated iron(III) hydroxide, Bayoxide had a KF of 0.47 (mg/g)·(L/g)n in tap water, nearly 3.5- -fold higher than in demineralized water. When we used the calculated Freundlich constants and an γe(As(V))=5 µg/L in Eq. 1, qeF was 0.42 mg of As(V) per g of Bayoxide in tap water and 0.85 mg of As(V) per g of Bayoxide in demineralized water. This large difference probably reflects the high adsorption intensity (1/n), which was 0.7535 in demineralised and 0.3639 in tap water. Our measurement of the adsorption capacity of Bayoxide is comparable to that of Westerhoff et al. (11), who reported a value of 0.5 mg of As(V) per g of adsorbent. Lin et al. (7) observed a KF of 16.7 (mg/g)·(L/g)n for Bayoxide, but they used much higher As(V) concentrations than we did (5.1–20.8 mg of As(V) per L).

In contrast to the other two adsorbents, Titansorb adsorbed more As(V) in tap than in demineralized water, where the Freundlich constant KF was 0.05 (mg/g)·(L/g)n. Based on Eq. 1, qeF was 0.14 and 0.11 mg of As(V) per g of Titansorb in tap and demineralized water, respectively. Titansorb had the lowest qeF of all three absorbents, which may be due to the pH values of model solutions ((8±0.1)). For example, Dutta et al. (19) reported that lower pH enhances the removal of As(V) from water by adsorption onto TiO2. Furthermore, Bang et al. (25), who worked with higher concentrations of competitive ions than we did, reported no obvious effect of silica and phosphorus on the adsorption of As(V) onto granular TiO2.

Table 2 reports the Langmuir constant Q0, representing maximum monolayer coverage capacity and the Langmuir isotherm constant KL, representing the sorption capacity, of the three adsorbents (Fig. 2). Among the three, iron(III) hydroxide had the highest value of Q0 (372.6 mg/g) and Titansorb the lowest (1.2 mg/g) in tap water. The same trend was observed in demineralized water, with Q0 of iron(III) hydroxide equal to 181.9 mg/g, of Bayoxide to 8.0 mg/g and of Titansorb to 1.4 mg/g. Iron(III) hydroxide had a Q0 almost 2-fold higher in demineralized than in tap water, and Bayoxide had a Q0 almost 5-fold higher in demineralized water. Titansorb, in contrast, had similar Q0 in both types of water. However, our study focuses on the removal of low As(V) concentrations, considering drinking water treatment and consequently Q0 values may not be representative of the adsorbent maximum adsorption capacity due to low initial arsenic concentrations employed.

Fig. 2 Dependence of As(V) adsorbed at equilibrium (qeL) on As(V) concentration (γe) in a solution, used to calculate Langmuir isotherm constants

Even though iron(III) hydroxide and Bayoxide E33 had substantially higher Q0 values in demineralized water than in tap water, the fact that their calculated KF values were much higher in demineralized water meant that the calculated capacity of adsorption (qeL) was greater in tap water, as can be seen from the values of qeL calculated from Eq. 2 at γe(As(V))=5 µg/L. Titansorb had the smallest value of qeL of all three adsorbents, indicating no significant influence of other ions on As(V) adsorption. Our Langmuir isotherm constants for As(V) removal were lower than those reported by Bang et al. (25) for granular TiO2, perhaps reflecting the fact that those authors used much higher As(V) concentrations (10–60 mg/L) in their adsorption tests. The same authors reported KL=0.000172 L/µg, Q0=40 mg/g and qeL=1.7 mg/g. Like us, they did not observe appreciable interference from other ions. During their column test experiments in which γ0=32 µg/L, they observed qeL of 0.11 mg/g, which is similar to our results.

The separation factor (RL) suggests the possibility of using Langmuir isotherm for adsorption of As(V), and it can indicate the adsorption as: unfavourable (RL>1), linear (RL=1), favourable (0<RL<1) and irreversible (RL=0) (20, 21). Eq. 3 was used to calculate RL for all three adsorbents: using KL and γ0=100 µg/L gave values from 0.04 to 0.61 (Table 2). These values indicate favourable adsorption (0<RL<1) by all three adsorbents.

Although the three adsorbents differed in adsorption capacity, KF and Q0 in tap and demineralized water (Table 2), they had similar values of qeF and qeL calculated from Eqs. 1 and 2. In addition, both isotherms gave high coefficients of determination (R2). Higher coefficients were obtained using the Langmuir model, indicating that adsorption on all three adsorbents may be more accurately described by formation of an As(V) monolayer on the adsorbent surface.

Several studies have shown that higher water pH diminishes adsorption capacity, mostly due to changes in the charge of arsenate species, which then need two active sites on the adsorbent. Also, increase of pH value above the isoelectric point (IEP) of the adsorbent results in more negative charge of adsorbent surface (26, 27), which can diminish adsorption capacity. Bayoxide and freshly precipitated iron(III) hydroxide usually have IEP ranging between 7 and 7.5 (23) and that of TiO2 is lower, which could explain lower adsorption capacity of Titansorb in our study since we conducted experiment at higher pH values. Furthermore, As(V) adsorption is also influenced by the competitive ions present in the water, mostly by OH, PO43–, SO42– and NO3 (4, 7, 28). Tap water used in our experiments did not have high concentrations of the mentioned ions, but it can be seen from the obtained results that some influence on the adsorption capacity was present, mostly on iron(III) hydroxide and Bayoxide, and less on Titansorb.

Adsorption column tests

Column tests were conducted to measure the adsorption of As(V) by Bayoxide E33 and Titansorb from spiked tap water containing 100 µg of As(V) per L (Fig. 3). Titansorb had a breakthrough point of 10 µg of As(V) per L in the effluent after 1077 bed volumes, while Bayoxide could be used to treat 1436 bed volumes before the As(V) concentration in the effluent reached 10 µg/L. Also, Bayoxide had adsorption capacity (q) of 0.24 µg of As(V) per g, and Titansorb of 0.17 µg of As(V) per g, before achieving mass concentration of As(V) of 10 µg/L in treated water. Comparing q values of the column test with calculated qeF and qeL values from Table 2, qe of Bayoxide was higher in the batch tests, indicating that Bayoxide should adsorb more As(V) from water in column test. This difference may be influenced by an EBCT in a column test, which was 12 min. Similar influence of EBCT on the adsorption capacity of adsorbents was observed in the work of Tresintsi et al. (18). On the other hand, Titansorb in our experiment showed similar q, qeL and qeF values, which suggests that the employed EBCT did not influence its adsorption capacity.

Fig. 3 Adsorption capacity (q, in mg of As(V) per g of adsorbent) test used for As(V) removal from tap water


Among the three adsorbents in this study, precipitated iron(III) hydroxide had the highest capacity for As(V) adsorption from both tap and demineralized water. Bayoxide had higher adsorption capacity than Titansorb in both the batch and column tests.

Other ions did not appear to appreciably influence As(V) adsorption by any of the three adsorbents tested here. Nevertheless, iron(III) hydroxide and Bayoxide demonstrated higher adsorption capacities in demineralized water than in tap water, with Bayoxide showing the greatest capacity difference between the types of water. Titansorb exhibited slightly better calculated adsorption capacity qeL and qeF in tap water than in demineralized water. All three adsorbents showed good adsorption, as values of separation factor RL from Langmuir isotherms ranged between 0.04 and 0.61.

Both Freundlich and Langmuir isotherms fit the experimental data with high coefficients of determination (>0.9012) for all adsorbents, indicating that both models may be useful for representing As(V) adsorption. Nevertheless, the Langmuir model showed somewhat better results, which may mean that it represents more accurately As(V) adsorption on these three adsorbents.



Guidelines for drinking-water quality: First addendum to 3rd edition, vol. 1. Recommendations. Geneva, Switzerland: WHO Press, World Health Organization (WHO); 2006.


Smith AH, Smith MMH. Arsenic drinking water regulations in developing countries with extensive exposure. Toxicology. 2004;198:39–44. DOI: PubMed:


Goldberg S, Johnston CT. Mechanisms of arsenic adsorption on amorphous oxides evaluated using macroscopic measurements, vibrational spectroscopy, and surface complexation modeling. J Colloid Interface Sci. 2001;234:204–16. DOI: PubMed:


Mohan D, Pittman C Jr. Arsenic removal from water/wastewater using adsorbents – a critical review. J Hazard Mater. 2007;142:1–53. DOI: PubMed:


Domenico PA, Schwartz FW. Physical and chemical hydrogeology. New York, NY, USA: John Wiley & Sons; 1998.


Shih MC. An overview of arsenic removal by pressure-driven membrane processes. Desalination. 2005;172:85–97. DOI:


Lin TF, Liu CC, Hsieh WH. Adsorption kinetics and equilibrium of arsenic onto an iron-based adsorbent and an ion exchange resin. Water Sci Technol. 2006;6:201–7.


Shevade S, Ford RG. Use of synthetic zeolites for arsenate removal from pollutant water. Water Res. 2004;38:3197–204. DOI: PubMed:


Payne KB, Abdel-Fattah TM. Adsorption of arsenate and arsenite by iron-treated activated carbon and zeolites: effects of pH, temperature, and ionic strength. J Environ Sci Health A. 2005;40:723–49. DOI: PubMed:


Vithanage M, Chandrajith R, Bandara A, Weerasooriya R. Mechanistic modeling of arsenic retention on natural red earth in simulated environmental systems. J Colloid Interface Sci. 2006;294:265–72. DOI: PubMed:


Westerhoff P, De Haan M, Martindale A, Badruzzaman M. Arsenic adsorptive media technology selection strategies. Water Qual Res J Canada. 2006;41:171–84.


Pattanayak J, Mondal K, Mathew S, Lalvani SB. A parametric evaluation of the removal of As(V) and As(III) by carbon- -based adsorbents. Carbon. 2000;38:589–96. DOI:


Uwamariya V, Petrusevski B, Lens PNL, Amy G. Effect of calcium on adsorptive removal of As(III) and As(V) by iron oxide-based adsorbents. Environ Technol. 2014;35:3153–64. DOI: PubMed:


Driehaus W. Arsenic removal – experience with the GEH (R) process in Germany. Water Sci Technol. 2002;2:275–80.


Pena ME, Korfiatis GP, Patel M, Lippincott L, Meng X. Adsorption of As(V) and As(III) by nanocrystalline titanium dioxide. Water Res. 2005;39:2327–37. DOI: PubMed:


Edwards M. Chemistry of arsenic removal during coagulation and Fe-Mn oxidation. J Am Water Works Assoc. 1994;86:64–78.


Jekel M, Amy GL. Arsenic removal during drinking water treatment. In: Newcombe G, Dixon D, editors. Interface science and technology, vol. 10. Philadephia, PA, USA: Elsevier, B.V.; 2006. pp. 193–206. DOI:


Tresintsi S, Simeonidis K, Zouboulis A, Mitrakas M. Comparative study of As(V) removal by ferric coagulation and oxy-hydroxides adsorption: laboratory and full-scale case studies. Desalination Water Treat. 2013;51:2872–80. DOI:


Dutta PK, Ray AK, Sharma VK, Millero FJ. Adsorption of arsenate and arsenite on titanium dioxide suspensions. J Colloid Interface Sci. 2004;278:270–5. DOI: PubMed:


Foo KY, Hameed BH. Insights into the modeling of adsorption isotherm systems. Chem Eng J. 2010;156:2–10. DOI:


Weber TW, Chakravorti RK. Pore and solid diffusion models for fixed-bed adsorbers. AIChE J. 1974;20:228–38. DOI:


Clesceri LS, Greenberg AE, Eaton AD, editors. Standard methods for the examination of water and wastewater. Washington, DC, USA: American Public Health Association (APHA); 1998.


Cornell RM, Schwertmann U. The iron oxides: structure, properties, reactions, occurrences and uses. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA; 2003.


Mitrakas MG, Panteliadis PC, Keramidas VZ, Tzimou-Tsitouridou RD, Sikalidis CA. Predicting Fe3+ dose for As(V) removal at pHs and temperatures commonly encountered in natural waters. Chem Eng J. 2009;155:716–21. DOI:


Bang S, Patel M, Lippincott L, Meng X. Removal of arsenic from groundwater by granular titanium dioxide adsorbent. Chemosphere. 2005;60:389–97. DOI: PubMed:


Tresintsi S, Simeonidis K, Vourlias G, Stavropoulos G, Mitrakas M. Kilogram-scale synthesis of iron oxy-hydroxides with improved arsenic removal capacity: study of Fe(II) oxidation–precipitation parameters. Water Res. 2012;46:5255–67. DOI: PubMed:


Wu S, Hu W, Luo X, Deng F, Yu K, Luo S, et al. Direct removal of aqueous As(III) and As(V) by amorphous titanium dioxide nanotube arrays. Environ Technol. 2013;34:2285–90. DOI: PubMed:


Guan X, Du J, Meng X, Sun Y, Sun B, Hu Q. Application of titanium dioxide in arsenic removal from water: a review. J Hazard Mater. 2012;215–216:1–16. DOI: PubMed:

This display is generated from NISO JATS XML with jats-html.xsl. The XSLT engine is libxslt.


Posjeta: 575 *