Tehnički vjesnik, Vol. 23 No. 5, 2016.
Izvorni znanstveni članak
https://doi.org/10.17559/TV-20150118204850
A noninvasive inclusion of synchrophasors in the power system state estimation
Vedran Kirincic
; University of Rijeka, Faculty of Engineering, Department of Electric Power Systems, Vukovarska 58, 51000 Rijeka, Croatia
Srdjan Skok
; University of Rijeka, Faculty of Engineering, Department of Electric Power Systems, Vukovarska 58, 51000 Rijeka, Croatia
Dubravko Frankovic
; University of Rijeka, Faculty of Engineering, Department of Electric Power Systems, Vukovarska 58, 51000 Rijeka, Croatia
Sažetak
The paper investigates the application of synchronized phasor measurements, which are available from Phasor Measurement Units (PMUs), in the power system state estimation. In order to avoid changes in the type of the input measurements of the classical state estimator, which runs in the control centre, the proposed model utilizes voltage and current phasors to calculate pseudo-measurements such as pseudo-voltages, power flows and power injections. These pseudo-measurements are used together with the voltage phasor magnitudes and the conventional measurements in the iterative procedure. The IEEE 14, 30, 57 and 118 buses test systems as well as the mathematical model of the Croatian transmission power system were used as the test systems. The results of the simulation were compared with the classical state estimator, which uses only conventional measurements. The effect of the voltage phasor angles on the state estimator performance was investigated.
Ključne riječi
hybrid state estimator; Phasor Measurement Unit (PMU); power system state estimation; synchronized measurement technology
Hrčak ID:
167509
URI
Datum izdavanja:
13.10.2016.
Posjeta: 1.528 *