hrcak mascot   Srce   HID

Izvorni znanstveni članak

Effect of compaction degree on permittivity of water-glass containing moulding sand

B. Gal ; Wroclaw University of Technology, Department of Foundry Engineering, Plastics and Automation and Automation, Wrocław, Poland
K. Granat ; Wroclaw University of Technology, Department of Foundry Engineering, Plastics and Automation and Automation, Wrocław, Poland
D. Nowak ; Wroclaw University of Technology, Department of Foundry Engineering, Plastics and Automation and Automation, Wrocław, Poland

Puni tekst: engleski, pdf (249 KB) str. 17-20 preuzimanja: 223* citiraj
APA 6th Edition
Gal, B., Granat, K. i Nowak, D. (2017). Effect of compaction degree on permittivity of water-glass containing moulding sand. Metalurgija, 56 (1-2), 17-20. Preuzeto s https://hrcak.srce.hr/168843
MLA 8th Edition
Gal, B., et al. "Effect of compaction degree on permittivity of water-glass containing moulding sand." Metalurgija, vol. 56, br. 1-2, 2017, str. 17-20. https://hrcak.srce.hr/168843. Citirano 25.01.2020.
Chicago 17th Edition
Gal, B., K. Granat i D. Nowak. "Effect of compaction degree on permittivity of water-glass containing moulding sand." Metalurgija 56, br. 1-2 (2017): 17-20. https://hrcak.srce.hr/168843
Harvard
Gal, B., Granat, K., i Nowak, D. (2017). 'Effect of compaction degree on permittivity of water-glass containing moulding sand', Metalurgija, 56(1-2), str. 17-20. Preuzeto s: https://hrcak.srce.hr/168843 (Datum pristupa: 25.01.2020.)
Vancouver
Gal B, Granat K, Nowak D. Effect of compaction degree on permittivity of water-glass containing moulding sand. Metalurgija [Internet]. 2017 [pristupljeno 25.01.2020.];56(1-2):17-20. Dostupno na: https://hrcak.srce.hr/168843
IEEE
B. Gal, K. Granat i D. Nowak, "Effect of compaction degree on permittivity of water-glass containing moulding sand", Metalurgija, vol.56, br. 1-2, str. 17-20, 2017. [Online]. Dostupno na: https://hrcak.srce.hr/168843. [Citirano: 25.01.2020.]

Sažetak
The presented basic research was aimed at determining a correlation between compaction degree of moulding sand and its permittivity εr at 2,45•109 s-1. The measurement results make a basis for mathematical description of a multilayer technological system as is a combination of moulding sand and foundry instrumentation. Analysis of the results shows that compaction significantly influences permittivity of the sandmix containing water-glass, because permittivity value increases with increasing compaction degree.

Ključne riječi
casting; moulding sand; permittivity; compaction degree; microwaves

Hrčak ID: 168843

URI
https://hrcak.srce.hr/168843

Posjeta: 361 *