Skoči na glavni sadržaj

Izvorni znanstveni članak

Change of mould flux properties during continuous casting of ferritic stainless steel

B. Arh ; Institute of Metals and Technology, Ljubljana, Slovenia
F. Tehovnik ; Institute of Metals and Technology, Ljubljana, Slovenia
F. Vode ; Institute of Metals and Technology, Ljubljana, Slovenia


Puni tekst: engleski pdf 241 Kb

str. 40-42

preuzimanja: 1.244

citiraj


Sažetak

During the continuous casting of stainless steel the performance of the mould powder is a key factor in this process. The content of Cr in the steel is up to 18 %, high corrosion resistance of the steel is improved with Al addition, up to 4 %. The aim of the paper was to study the change in physical properties of the casting powder, due to reactions between Al in the steel with SiO2 in the mould flux during continuous casting. In order to identify the change in the ability of lubrication casting slag with time, depending on the increase in the content of alumina in the slag. On the basis of these results, the most suitable casting powder for continuous casting of ferritic stainless steel with high aluminium content was determined.

Ključne riječi

alloy steel; casting; powders-properties; SiO<sub>2</sub>; Al<sub>2</sub>O<sub>3</sub>

Hrčak ID:

168877

URI

https://hrcak.srce.hr/168877

Datum izdavanja:

2.1.2017.

Posjeta: 1.733 *